Genero Report Engine error messages
A list of Genero Report Engine (GRE) error messages. For messages that are not self-explanatory, additional information is provided.
| Number | Description |
|---|---|
| GS-31200 | Internal error: Invalid bar code type Contact your local support center. |
| GS-31201 | Bar code type 'type': invalid codeValue
'value'. Value is not an integer Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31202 | Bar code type 'type': invalid codeValue
'value A'. The value needs to be 'value B' digits long Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31203 | Bar code type 'type': invalid checksum
'value A' in 'value B'. Value should be 'value
C' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31204 | DocumentStructureException: failed to add text node
(cause='value'). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31205 | DocumentStructureException: failed to finalize text node
(cause='value'). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31206 | Bar code type 'value A': invalid
codeValue 'value B'. Value is not an integer Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31207 | Bar code type 'value A': invalid
codeValue 'value B'. The value needs to be 'value C' digits
long Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31208 | Bar code type 'value A': invalid
codeValue 'value B'. First digit must be either '0' or '1' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31209 | Internal error: Wrong initializer for digit 'value' |
| GS-31210 | Bar code type "Code128": invalid codeValue
'value'. Value cannot be parsed as comma separated character list For more information, see code-128. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31211 | Bar code type "Code128": invalid start codeValue
'value'. Sequence must start with STARTA, STARTB or STARTC For more information, see code-128. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31212 | Bar code type 'value A': invalid checksum
'value B' in 'value C'. Value should be 'value
D' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31213 | Bar code type "Code128": invalid character 'value
A' in codeValue 'value B'. Code is not available in the character set
'value C'. For more information, see code-128. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31214 | Bar code type 'value A': invalid
codeValue 'value B'. Value is not an integer Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31215 | Bar code type 'value A': invalid
codeValue 'value B'. The value needs to be 'value C' digits
long Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31216 | Bar code type 'value A': invalid checksum
'value B' in 'value C'. Value should be 'value
D' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31217 | Bar code type 'value A': invalid number
of digits 'value B'. Value must be a multiple of 2. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31218 | Bar code type 'value A': invalid value
for noCheckDigits 'value B'. Value must be either 1 or 2. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31219 | Bar code type 'value A': invalid
codeValue 'value B'. Value may contain only the digits 0-9 and the '-'
character. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31220 | Bar code type 'value A': invalid
codeValue 'value B'. The value needs to be 'value C' digits
long Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31221 | Bar code type 'value A': invalid K
checksum 'value B' in 'value C'. Value should be
'value D' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31222 | Bar code type 'value A': invalid C
checksum 'value B' in 'value C'. Value should be
'value D' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31224 | Bar code type 'value A': invalid
character 'value B' in codeValue 'value C'. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31225 | Bar code type 'value A': invalid
codeValue 'value B'. The value needs to be 'value C' digits
long Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31226 | Bar code type 'value A': invalid checksum
'value B' in 'value C'. Value should be 'value
D' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31227 | Bar code type "Code 39 Extended": invalid character
'value A' in codeValue 'value B'. For more information, see code-39-extended. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31228 | Bar code type "Code 39 Extended": invalid codeValue
'value'. Value cannot be parsed as comma separated character list For more information, see code-39-extended. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31229 | Bar code type "Code 39 Extended": invalid character
'value A' in codeValue 'value B'. For more information, see code-39-extended. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31230 | Bar code type 'value A': invalid
codeValue 'value B'. Value is not an integer Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31231 | Bar code type 'value A': invalid
codeValue 'value B'. The value needs to be 9 digits long Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31232 | Bar code type 'value A': invalid checksum
'value B' in 'value C'. Value should be 'value
D' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31233 | Internal error: Wrong initializer for digit 'digit' |
| GS-31234 | Bar code type 'value A': invalid value
for controlCharacters 'value B'. Value must be a four character string. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31235 | Bar code type 'value A': invalid value
for noCheckDigits 'value B'. Value must be either 1 or 2. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31236 | Bar code type 'value A': invalid
character 'value B' in codeValue 'value C'. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31237 | Bar code type 'value A': invalid
codeValue 'value B'. The value needs to be 'value C' digits
long Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31238 | Bar code type 'type': invalid K checksum
'value A' in 'value B'. Value should be 'value
C' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31239 | Bar code type 'value A': invalid C
checksum 'value B' in 'value C'. Value should be
'value D' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31241 | Bar code type "Code 93 Extended": invalid codeValue
'value'. Value cannot be parsed as comma separated character list For more information, see code-93-extended. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31242 | Bar code type "Code 93 Extended": invalid character
'value A' in codeValue 'value B'. For more information, see code-93-extended. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31243 | Bar code type 'value A': invalid
character 'value B' in codeValue 'value C'. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31244 | Bar code type 'value A': invalid
codeValue 'value B'. The value needs to be 'value C' digits
long Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31245 | Bar code type 'value 1': invalid
codeValue 'value 2'. The first character of the value needs to be either 'a',
'b', 'c' or 'd' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31246 | Bar code type 'value A': invalid
codeValue 'value B'. The last character of the value needs to be either 't', 'n',
'*' or 'e' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31247 | Bar code type 'value A': invalid
codeValue 'value B'. The character 'value C' may not be used
within the value Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31248 | Bar code type 'value A': invalid checksum
'value B' in 'value C'. Value should be 'value
D' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31249 | Internal error: Codabar 18: invalid check type For more information, see codabar-18. |
| GS-31250 | Bar code type 'value 1': invalid
codeValue 'value 2'. The last character of the value needs to be either 'a', 'b',
'c' or 'd' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31251 | Internal error: Codabar 2: invalid check type For more information, see codabar-2. |
| GS-31252 | Bar code type 'value': expected text to
follow '\' at end of "codeValue" attribute Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31253 | Bar code type 'value': expected three
octal digits to follow '\' in "codeValue" attribute at position
'position' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31254 | Bar code type 'value': expected octal
digit in "codeValue" attribute at position 'position' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31257 | Bar code type 'value A': code data too
long (val='value B'), max=928 Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31258 | Bar code type 'value A': invalid
errorCorrectionDegree 'value B'. Value must between 0 and 8. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31259 | Bar code type 'value A': invalid value
for lines'value B'. Value must be a value between 1 and 90. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31260 | Bar code type 'value A': invalid value
for lines 'value B'. Value causes illegal value for dataSymbolsPerLine of
'value C' which must be a value between 1 and 30. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31261 | Bar code type 'value A': invalid
dataSymbolsPerLine 'value B'. Value must between 1 and 30. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31262 | Bar code type 'value A': invalid value
for dataSymbolsPerLine 'value B'. Value causes illegal value for lines of
'value C' which must be a value between 1 and 90. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31264 | Bar code type 'value A': value for lines
'value B' and dataSymbolsPerLine 'value C' is to small to hold
data of 'value D'. The product must be at least 'value
E' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31265 | Bar code type 'value A': value for
additionalPaddingLines 'value B' causes the data lines to exceed the maximum
value of 90 lines Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31266 | Bar code type 'value': encoding error:
data needs to end with a latch to ASCII encodation Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31267 | Bar code type "data-matrix": invalid rawCodeValue
'value'. Value cannot be parsed as comma separated character list For more information, see data-matrix bar code type. |
| GS-31268 | Character 'character' cannot be encoded
since it is not available in the code page ISO-8859-1. Error message and resolution should be self-explanatory. |
| GS-31269 | Datamatrix "Shifted ASCII" encoding: Character
'character' not allowed. For more information, see data-matrix bar code type. |
| GS-31270 | Datamatrix "Basic ASCII" encoding: Character
'character' not allowed. For more information, see data-matrix bar code type. |
| GS-31271 | Datamatrix "Shifted ASCII" encoding: Unknown encoding symbol
'symbol'. For more information, see data-matrix bar code type. |
| GS-31272 | Datamatrix "Basic ASCII" encoding: Unknown encoding symbol
'symbol'. For more information, see data-matrix bar code type. |
| GS-31273 | Datamatrix "C40 (basic set)" encoding: Character
'character' not allowed. For more information, see data-matrix bar code type. |
| GS-31274 | Datamatrix "C40 (basic set)" encoding: Illegal position of
"STARTASCII" symbol. For more information, see data-matrix bar code type. |
| GS-31275 | Datamatrix "C40 (basic set)" encoding: Unknown encoding
symbol 'symbol'. For more information, see data-matrix bar code type. |
| GS-31276 | Datamatrix "C40 (set 1)" encoding: Unknown encoding symbol
'symbol'. For more information, see data-matrix bar code type. |
| GS-31277 | Datamatrix "C40 (set 2)" encoding: Character
'character' not allowed. For more information, see data-matrix bar code type. |
| GS-31278 | Datamatrix "C40 (set 2)" encoding: Unknown encoding symbol
'symbol'. For more information, see data-matrix bar code type. |
| GS-31279 | Datamatrix "C40 (set 3)" encoding: Character
'character' not allowed. For more information, see data-matrix bar code type. |
| GS-31280 | Datamatrix "C40 (set 3)" encoding: Unknown encoding symbol
'symbol'. For more information, see data-matrix bar code type. |
| GS-31281 | Datamatrix "C40" encoding: Encountered non data character as
last character at the end of symbol space. For more information, see data-matrix bar code type. |
| GS-31282 | Datamatrix "C40" encoding: Encoded data exceeds maximum of
1558 bytes For more information, see data-matrix bar code type. |
| GS-31284 | Datamatrix "C40" encoding: Encountered non data character as
last character at the end of symbol space. For more information, see data-matrix bar code type. |
| GS-31285 | Datamatrix "BASE 256" encoding: failed to parse
'value' as byte value. For more information, see data-matrix bar code type. |
| GS-31286 | Datamatrix "BASE 256" encoding: failed to parse
'value' as byte value (value is outside of the range 0-255). For more information, see data-matrix bar code type. |
| GS-31287 | Datamatrix "ANSI X11" encoding: Character
'character' not allowed. For more information, see data-matrix bar code type. |
| GS-31288 | Datamatrix "ANSI X11" encoding: Illegal position of
"STARTASCII" symbol. For more information, see data-matrix bar code type. |
| GS-31289 | Datamatrix "ANSI X12" encoding: Unknown encoding symbol
'symbol'. For more information, see data-matrix bar code type. |
| GS-31290 | Datamatrix "ANSI X12" encoding: Invalid number of encoded
codewords ('value'). The number must be a multiple of 3 For more information, see data-matrix bar code type. |
| GS-31291 | Datamatrix "EDIFIACT" encoding: Character
'character' not allowed. For more information, see data-matrix bar code type. |
| GS-31292 | Datamatrix "EDIFACT" encoding: Illegal position of
"STARTASCII" symbol. For more information, see data-matrix bar code type. |
| GS-31293 | Datamatrix "EDIFACT" encoding: Unknown encoding symbol
'symbol'. For more information, see data-matrix bar code type. |
| GS-31294 | Datamatrix "EDIFACT" encoding: Invalid number of encoded
codewords ('value'). The number must either be a multiple of 4 or terminated by a
STARTASCII latch. For more information, see data-matrix bar code type. |
| GS-31295 | Code value too long Error message and resolution should be self-explanatory. |
| GS-31296 | Invalid number of arguments in gradient paint specification
(Required are x1, y1, color1, x2, y2, color2, cyclic) Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31297 | Failed to parse PXML x expression value 'value
A' from the gradientPaint initializer 'value B'. Parse
Error:'value C' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31298 | Failed to parse PXML y expression value 'value
A' from the gradientPaint initializer 'value B'. Parse
Error:'value C' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31299 | Failed to parse PXML color value 'value
A' from the gradientPaint initializer 'value B'. Parse
Error:'value C' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31300 | Failed to parse boolean value "cyclic" from the
gradientPaint initializer 'value A'. Parse Error:'value
B' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31301 | Invalid command 'command' in path
'path' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31302 | Unknown command 'command' in path
'path' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31303 | Number of items in xyList not a multiple of 2
(value='value A' count='value B' Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31304 | Must have same number of values as row titles multiplied by
column titles . Have 'value A' values and 'value B'
values Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31305 | Internal error: Invalid chart type |
| GS-31306 | Syntax error int PXML font size expression ('value
A') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31307 | Failed to parse PXML fontsize expression
'expression' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31308 | Decimal format is not available for this input
locale Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31309 | Decimal format is not available for this output
locale Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31310 | Failed to create HTML view (cause='value
A':'value B') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31311 | Failed to load image from data
(cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31312 | Unsupported image format in data URL
'URL' For more information, see Image Box and Location (location). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31313 | Unsupported image format loading image from URL
'URL' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31314 | Failed to load SVG document from file
'file' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31315 | Failed to load image from file 'file'
(cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31316 | Unsupported image format loading image from file
'file' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31317 | Failed to load image
(cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31318 | Can't find resource 'resource' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31319 | Failed to load SVG document from resource URL
'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31320 | Failed to load image from resource URL
'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31321 | Failed to load "Base-64" encoded SVG document from data URL
'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31322 | Failed to load SVG document from data URL
'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31323 | Syntax error in data URL 'URL' (Failed to
locate delimiter ',') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31324 | Unsupported encoding in data URL 'URL'
(Failed to find ";base64") Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31325 | Incomplete data URL 'URL' (Data is
missing) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31326 | Failed to load image from data URL 'URL'
(cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31327 | Failed to load image from URL 'URL'
(cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31328 | Internal error: GrabPrintable::getFontRenderContext() returned null |
| GS-31329 | Invalid "anchorX" PXML expression value
'value' computed from expression 'expression' (must yield a
value between 0 and 1)) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31330 | Invalid "anchorY" PXML expression value
'value' computed from expression 'expression' (must yield a
value between 0 and 1)) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31331 | Invalid font style value 'value' in list
'list' (must be one of: "plain", "italic" or "bold" Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31332 | Failed to parse font size percent expression
'expression' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31333 | The empty string is not allowed as PXML color
expression Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31334 | Failed to parse PXML color expression
'expression' (must be a '#' followed by an integer in hex notation)
(cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31335 | Invalid port 'value' value Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31336 | invalid value for lowWaterMark (must be integer >= 0)
val='value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31337 | invalid value for highWaterMark (must be negative or greater
than lowWaterMark) lowWaterMark='value A' highWaterMark='value
B' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31338 | SAXException: failed to initialize
(cause='value'). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31339 | Timeout: Page was not consumed within
'value' milliseconds Error message and resolution should be self-explanatory. |
| GS-31340 | SAXException: failed to create page
(cause='value'). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31341 | SAXException: failed to finish document
(cause='value'). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31342 | Internal error: Page not in map |
| GS-31343 | IOException: failed to transform memory queue into disk
queue (cause='value'). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31344 | IOException: failed to write page to disk queue
(cause='value'). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31345 | IOException: failed to flush queue to disk
(cause='value'). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31346 | Internal error: 'value'::eventInitializedChild() called for a cloned LayoutNode |
| GS-31347 | Nodes attached to named ports may not be self
placing Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31348 | Node order violation: Node has "section" property set to
'value' but it is preceded by a node not having the property set. Repair by
moving this node "before" any nodes that do not have the property defined. For more information, see Add headers and footers to a report and Section (section). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31349 | Internal error: cannot propagate, parent==null||parent not instanceof LayoutNode |
| GS-31350 | Internal error: have unitializedChild when cloning |
| GS-31351 | Internal error: 'value'::attachPortedChild() invalid port. Port='port' |
| GS-31352 | The "roundingMode" attribute is not supported on this
platform (requires Java version 1.6 or higher). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31353 | Failed to parse value 'value' using the
specified input format (cause='cause') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31354 | Failed to format field value 'value'
using format 'format' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31355 | Invalid page number format 'format' (must
be one of : "arabic","lowerroman","roman" or "upperroman" For further information, see Using a page number string and Align and format numbers. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31356 | Illegal argument value 'value' as second
parameter in call to the PXML function format(). Valid values are ARABIC, LOWERROMAN and
UPPERROMAN For further information, see Defining PXML expressions. |
| GS-31357 | Internal error: getStringReturnValue called on function format. The function returns a string value |
| GS-31358 | Internal error: getParameterType called on function 'function'. The function takes no parameters |
| GS-31359 | Internal error: pushString called on function 'function'. The function takes no parameters |
| GS-31360 | Internal error: pushNumeric called on function 'function'. The function takes no parameters |
| GS-31361 | Internal error: getStringReturnValue called on function 'function'. The function returns a numeric value |
| GS-31362 | Internal error: pushString called on function 'function'. The function takes only one string parameter |
| GS-31363 | Internal error: getStringReturnValue called on function 'function'. The function returns a numeric value |
| GS-31364 | Number of sizes and titles differ (Have 'value
A' sizes and 'value B' titles) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31365 | Internal error: Invalid pie graph type |
| GS-31366 | Internal error: 'value'::eventNewChild() called for a cloned LayoutNode |
| GS-31367 | Internal error: 'value'::eventInitializedChild() called for a cloned LayoutNode |
| GS-31368 | Internal error: cannot propagate, parent==null||parent not instanceof LayoutNode |
| GS-31369 | Internal error: have unitializedChild when cloning |
| GS-31370 | Loading SVG document from url 'url'
failed (cause='value') Error message and resolution should be self-explanatory. |
| GS-31371 | Loading SVG document from reader failed
(cause='value') Error message and resolution should be self-explanatory. |
| GS-31372 | Loading SVG document from input stream failed
(cause='value') Error message and resolution should be self-explanatory. |
| GS-31373 | Invalid command in transformInstructions attribute
('value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31374 | not enough arguments to 'command' command
in transform attribute. Required are 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31375 | Wrong number of matrix values in
'attribute' attribute ('value') required are 6 Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31376 | Internal error: 'value A' expression='value B' |
| GS-31377 | Indentation value exceeds width by
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31378 | Internal error: No parent |
| GS-31379 | Internal error: Parent not of type LayoutNode (type='type') |
| GS-31382 | The number of items in all series must be the same for the
"StackedArea" type. For further information, see Category Chart. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31383 | The x values of different series need to be the same for the
"StackedArea" type. For further information, see Category Chart. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31384 | The number of xValues and yValues differ (Have
'value A' xValues and 'value B' yValues) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31385 | When seriesTitles are specified, they must have same number
as xValues and yValues. Have 'value A' xValues and 'value B'
seriesTitles Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31386 | Internal error: Invalid code type for XYGraph For further information, see XY Chart. |
| GS-31388 | Internal error: UnsupportedEncodingException 'value A' for value 'value B' using encoding 'value C' |
| GS-31389 | QR-Code: encoding exception 'exception'
on encoding value 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. See qr-code. |
| GS-31391 | QR-Code: Unsupported encoding 'value'
(Run "CharsetInfo" for a list of supported encodings) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. See qr-code. |
| GS-31392 | QR-Code: Invalid the error correction degree value
'value' (must be a value between 0 and 3) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. See qr-code. |
| GS-31393 | Invalid font size value 'value' (value
needs to be to be greater than 0) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31394 | Error parsing hex digit {0} at position 'value
A' in string "('value B')") Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31395 | Parse error: Failed to parse tracking code and routing code
from code value 'value' (Found more than one comma) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31396 | Parse error: Failed to parse tracking code and routing code
from code value 'value' (Encountered non digit character {1}) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31397 | Parse error: routing code 'code' exceeds
11 digits Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31398 | Parse error: Tracking code 'code' is too
short (needs to have at least 2 digits) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31399 | Parse error: The second digit of the tracking code {0} is
outside the allowed range 0 - 4 in tracking code 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31400 | Nodes attached to the last page footer port must be
specified last (After all other nodes including nodes for the primary port) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31401 | Failed to load PDF document from file
'file' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31402 | Failed to load PDF document from resource URL
'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31403 | Failed to load "Base-64" encoded PDF document from data URL
'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31404 | Loading PDF document from url 'URL'
failed (cause='value') Error message and resolution should be self-explanatory. |
| GS-31405 | Loading PDF document failed
(cause='value') Error message and resolution should be self-explanatory. |
| GS-31406 | Failed to load "Base-64" encoded PDF document from data URL
'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-31407 | Requested page index 'index' is out of
the range 0..'value'. Error message and resolution should be self-explanatory. |
| GS-31408 | Footer, port:error:(GS-31408) Nodes attached to the
anyPageFooter port must be specified prior to specifying any nodes for the primary
port All headers and footers (except the Last Page Footer) must be the elder siblings of all nodes without the Section property specified. In the Structure view, move the Any Page Footer node to a position before the first node without the Section property specified. For further details, see Add headers and footers to a report. |
| Number | Description |
|---|---|
| GS-32100 | Instantiating the Viewer failed with a
TargetInvokationException (cause='value A':'value
B') For further information, go to Packaging for a mobile device in the Genero Studio User Guide. |
| Number | Description |
|---|---|
| GS-32700 | attribute 'attribute' must be
specified Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32701 | Invalid value 'value' (must be
integer) Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32702 | Invalid value 'value' (must be a floating
point value) Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32703 | Invalid value 'value' (must be
boolean) Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32704 | Invalid enumeration value 'value A' (must
be one of: 'value B') Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32705 | Invalid option value 'value A' (must be
one of: 'value B') Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32706 | Required option value (must be one of:
'value') Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32707 | Invalid mandatory option value 'value A'
(must be one of: 'value B') Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32708 | Invalid boolean option value 'value A'
(must be one of: 'value B') Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32709 | Required boolean option value (must be one of:
'value') Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32710 | Invalid mandatory boolean option value 'value
A' (must be one of: 'value B') Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32711 | Invalid value 'value' (must be a colon
separated list of float point values) Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32712 | Invalid value 'value' (must be a colon
separated list of POSITIVE float point values) Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32713 | Invalid value 'value' (must be a colon
separated list of integer values) Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32714 | Invalid object option value 'value A'
(must be one of: 'value B') Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32715 | Required object option value (must be one of:
'value') Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32716 | Invalid mandatory object option value 'value
A' (must be one of: 'value B') Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32717 | Invalid value 'value' (must be a colon
separated list of strings): unexpected character 'character' at position
'position'. Expected a " " or "," character Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32718 | Invalid value 'value A' (must be a colon
separated list of strings): encountered unclosed string starting a position 'value
B'. Error message and resolution should be self-explanatory. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-32719 | Missing lower bound in range specification
'value' in expression 'expression' Error message and resolution should be self-explanatory. |
| GS-32720 | Failed to parse 'value' as number in
expression in expression 'expression' Error message and resolution should be self-explanatory. |
| GS-32721 | Failed to parse 'value' as upper bound
number in expression in expression 'expression' Error message and resolution should be self-explanatory. |
| Number | Description |
|---|---|
| GS-33000 | 'value': not prepared to handle nested
style declarations Error message and resolution should be self-explanatory. |
| GS-33001 | Failed to parse style attribute
'attribute'. Parse error='value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33002 | Error parsing CSS stylesheet:
'value' Error message and resolution should be self-explanatory. |
| GS-33003 | Internal error: Node 'node'
('value') getIdValue() failed Error message and resolution should be self-explanatory. |
| GS-33004 | Internal error: Invalid operator
'operator' Error message and resolution should be self-explanatory. |
| GS-33005 | Internal error: Invalid Id
'value' Error message and resolution should be self-explanatory. |
| GS-33006 | Internal error: Invalid Id
'value' Error message and resolution should be self-explanatory. |
| GS-33007 | Internal error: failed to find simple selector
index Error message and resolution should be self-explanatory. |
| GS-33008 | Internal error: garbled selector Error message and resolution should be self-explanatory. |
| GS-33009 | error during printing: Exception:
'value' For further information, see Configure printers. |
| GS-33010 | Executing process 'process' returned non
zero exit code: 'value', Process output:'output' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33011 | Got an exception of type 'value' when
attempting to start process 'process' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33012 | IOException writing to file 'file'
(cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33013 | Internal error: closing tag='value' |
| GS-33014 | Internal error: Expected closing 'value A' tag. Got 'value B' tag instead |
| GS-33015 | Please contact your sales office regarding
licensing. If you are using a Genero Enterprise license, this error can occur when the Genero Report Engine detects an expired maintenance key. When an expired maintenance key is encountered, each report prints this message on an additional page at the start of the report. If you have purchased maintenance support, ensure you have updated the maintenance key on your system. Otherwise, contact your local support center. |
| GS-33016 | Missing COLDEF section in TABLE For further information, see Table. |
| GS-33017 | Found illegal tag 'tag' within COLDEFS
section For further information, see Table. |
| GS-33018 | COLDEF element requires "fWidth" or "pWidth"
attribute For further information, see Table. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33019 | COL references undeclared column in COLDEFS
section For further information, see Table. |
| GS-33020 | Illegal align value 'value' (must be one
of "left", "right", "center" or "baseline") Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33021 | invalid value 'value' for align attribute
(must be one of "left", "right" or "center") Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33022 | LI element is not nested within a OL or UL element Error message and resolution should be self-explanatory. |
| GS-33023 | Encountered DIMENSIONS element at unexpected location within
a PIVOTTABLE. DIMENSIONS need to be declared before any VALUES. For further information, see Working with pivot tables. |
| GS-33024 | Encountered a DATACOLUMN element for an undeclared
column. Error message and resolution should be self-explanatory. |
| GS-33025 | 'element' element encountered at
unexpected position.'value' Error message and resolution should be self-explanatory. |
| GS-33026 | Failed to parse value 'value' as floating
point value Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33027 | Not enough dimensions in pivot table to draw as a map chart
(Table needs to have at least one dimension column) For further information, see Working with pivot tables. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33028 | Not enough values in pivot table to draw as a map chart
(Table needs to have at least one value column) For further information, see Working with pivot tables. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33029 | Not enough dimensions in pivot table to draw as a map chart
(Table needs to have at least two dimension columns) For further information, see Working with pivot tables. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33030 | Not enough values in pivot table to draw as a map chart
(Table needs to have at least one value column) For further information, see Working with pivot tables. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33031 | Not enough values in pivot table to draw as a xy chart
(Table needs to have at least two value columns) For further information, see Working with pivot tables. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33032 | First value is not numeric (The first two values need to be
numeric in order to draw a XY chart) For further information, see XY charts. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33033 | Second value is not numeric (The first two values need to be
numeric in order to draw a XY chart) For further information, see XY charts. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33034 | Internal error: closing tag='value' |
| GS-33035 | Internal error: Expected closing 'value A' tag. Got 'value B' tag instead |
| GS-33036 | Internal error: Reference to unregistered color 'color' |
| GS-33037 | Internal error: Reference to unregistered font
'font' For further information, see Font troubleshooting. |
| GS-33038 | Incomplete document Error message and resolution should be self-explanatory. |
| GS-33039 | IllegalAccessException: Cannot load class
'class' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33040 | InstantiationException: Cannot load class
'class' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33041 | NoSuchMethodException: Cannot load class
'class' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33042 | InvocationTargetException: Cannot load class
'class' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33043 | Internal error: IOException (cause='value' |
| GS-33044 | Internal error: parse called |
| GS-33045 | Syntax error in PXML font size expression
('value') (Missing comma) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33046 | Syntax error in PXML font size expression
('value') (can't parse "line" and "column" values as integers) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33047 | Failed to parse font size percent expression
'expression' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33048 | Internal error: Could not find element 'element' with source id 'id' (name='name'), path='path' |
| GS-33049 | Internal error: Could not find element 'element' with source id 'id' (name='name'), path='path' |
| GS-33050 | Internal error: Failed to retrieve parent font size: (cause='value') |
| GS-33051 | Invalid port 'port' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33052 | Invalid page number format
'value' For further information, see pageNoFormat property. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33053 | Internal error: Got exception of type
'type' during creation of an hex encoded bitmap
(cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33054 | COLDEF element requires "fWidth" or "pWidth"
attribute For further information, see Table. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33055 | Internal error: failed to find child 'child' for parent 'parent' |
| GS-33056 | Internal error: node is of unexpected type 'value' |
| GS-33057 | COL references undeclared column in COLDEFS section in row
'row' For further information, see Table. |
| GS-33058 | Exception of type 'type' encountered when
trying to load image from URL 'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33059 | Value may not contain the filename separator character
'character' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33060 | Value 'value' is not supported on this
platform (Run "java ImageIOInfo" to obtain a list of available formats) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33061 | Got an exception of type 'type' when
attempting to start the PPM image processor 'value A' (cause='value
B') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33062 | Got an exception of type 'type' when
attempting to write to the PPM image processor 'value A' (cause='value
B') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33063 | Executing PPM processor 'value A'
returned non zero exit code: 'value B' (Process output='value
C') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33064 | Executing PPM processor 'value A'
returned non zero exit code: 'value B') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33065 | Failed to save image to file 'file'
(cause='value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33066 | Encountered exception of type 'type'
while attempting to save a page image to a stream (cause='value'} Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33067 | Failed to save PPM image to file 'file'
(cause='value'} Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33068 | Invalid value 'value' (Allowed values are
between 0 and 1) Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33069 | Failed to save PDF document to file
'file' (cause='value'} Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33070 | Encountered exception of type 'type' when
attempting to write PDF document to host 'value A' at port
'port' (cause='value B') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33071 | Ecountered '{' in list (no nested lists allowed) at
character position 'position' in data 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33072 | Unexpected character 'character' at
character position 'position' in data 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33076 | Ecountered unexpected '{' character at character position
'position' in data 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33078 | Missing '{' to close list at character position
'position' in data 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33079 | Encountered unfinished attribute declaration at character
position 'position' in data 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33080 | Missing '=' character after attribute name at character
position 'position' in data 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33081 | Missing attribute value after '=' character at character
position 'position' in data 'value'. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33082 | 'value A': failed to write to host
'host' at port 'port', reason: 'value
B' Error message and resolution should be self-explanatory. |
| GS-33083 | Unknown encoding 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33084 | Invalid value 'value' for attribute
'attribute' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33085 | Internal error: got exception of type
'type' when creating a "date time" attribute from value 'value
A' (cause='value B') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33086 | Internal error: got exception of type
'type' when creating an integer attribute from value 'value A'
(cause='value B') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33087 | Internal error: got exception of type
'type' when creating a text attribute from value 'value A'
(cause='value B') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33088 | Attribute "mediaTrayNumbers" is only available on the Linux
platform Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33090 | No print service found See Configure printers. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33094 | Cannot write to file 'file'
msg='value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33095 | Internal error: Failed parse pattern value 'value A'. Msg='value B' |
| GS-33096 | Got an exception of type 'type' when
attempting to launch the spooler command 'command'
(cause='value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33097 | Got an exception of type 'type' when
attempting to write to the spooler 'spooler'
(cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33098 | cannot find stream printer for mime type
'type' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33100 | Internal error: reject called |
| GS-33101 | Internal error: got non 2D Graphics |
| GS-33102 | Internal error: pageIndex 'value' out of range ('range A','range B' |
| GS-33103 | Unexpected element 'element'. Expected
document root element to be a "PXML" element. Error message and resolution should be self-explanatory. |
| GS-33104 | 'value A' root element has wrong
namespace 'value B'. Expected namespace is 'value C'. Try
adding xmlns='value D' to the root element. Error message and resolution should be self-explanatory. |
| GS-33105 | Class 'class' not found Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33106 | Cannot load class 'class'
('value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33108 | Cannot load class 'class'. constructor
not found ('value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33110 | Internal error: 'value'::endElementEx() current==null |
| GS-33117 | IOException on writing RTF document to file
'file' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33118 | 'value A' element is not nested within a
'value B' element Error message and resolution should be self-explanatory. |
| GS-33120 | setting up print service failed
('value') Error message and resolution should be self-explanatory. |
| GS-33121 | IO error during printing ('value A'),
cause='value B' Error message and resolution should be self-explanatory. |
| GS-33122 | aborted printing ('value') Error message and resolution should be self-explanatory. |
| GS-33123 | error during printing ('value
A':'value B') Check your printer. |
| GS-33124 | error during printing, printing aborted. Check your printer. |
| GS-33125 | error during printing ('value') Check your printer. |
| GS-33126 | internal error: got invalid value 'value
A' for property orientationRequested. Setting to 'value B'. For further information, see fgl_report_setPrinterOrientationRequested. |
| GS-33127 | InvocationTargetException: failed to instantiate style sheet
'style sheet' (cause='value'). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33128 | Exception: failed to instantiate style sheet 'style
sheet' (cause='value'). Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33129 | IOException reading compressed source
(cause='value') Error message and resolution should be self-explanatory. |
| GS-33131 | Invalid command in transform attribute
('attribute') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33132 | Not enough arguments to 'value A' command
in transform attribute. Required are 'value B' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33133 | Cannot parse argument 'argument' as
number for the 'command' command in transform attribute Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33134 | Wrong number of matrix values in
'attribute' attribute ('value A') required are 'value
B' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33135 | Uneven number of values in 'attribute'
attribute ('value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33136 | Cannot resolve reference in use tag
href='value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33137 | Internal error: Invalid end cap value 'value' |
| GS-33138 | Internal error: Invalid line join 'value' |
| GS-33139 | Attribute value error: 'value A' must be
a value between 'value B' and 'value C' (val='value
D') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33140 | Wrt error: failed to read from source Error message and resolution should be self-explanatory. |
| GS-33141 | Wrt error: Got non zero status value:'value
A', msg='value B' Error message and resolution should be self-explanatory. |
| GS-33142 | Wrt error: Exception='value A',
msg='value B' Error message and resolution should be self-explanatory. |
| GS-33143 | IOException writing to file 'file'.
msg='value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33144 | IOException flushing to temp file.
msg='value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33145 | The TransformerFactory does not support SAX input and SAX
output Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33146 | Encountered "TransformerConfiguationException" trying to
initialize for loading XSLT style from URL 'URL'
(cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33147 | Encountered "SAXException" trying to initialize for loading
XSLT style from URL 'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33148 | Encountered "IOException" trying to load XSLT style from URL
'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33150 | Encountered "TransformerConfigurationException" trying to
load XSLT style from URL 'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33151 | Encountered "SAXNotRecognizedException" trying to load XSLT
style from URL 'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33152 | Encountered "SAXNotSupportedException" trying to load XSLT
style from URL 'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33153 | Encountered "SAXException" on issuing "startDocument" using
XSLT style from URL 'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33154 | Missing column value for column
'column' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33155 | Illegal character set name
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33156 | Unsupported character set name
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33157 | Failed to write page number template
(cause='value'} Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33158 | Path 'path' is not a directory Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33159 | Failed to create directory
'directory' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33160 | Unexpected element 'element'. Expected
document root element to be a "SVG" element. Error message and resolution should be self-explanatory. |
| GS-33161 | Encountered unreferenceable "g" element in "defs" element
("id" attribute missing). For further information, see Use hyperlinks in a report. |
| GS-33162 | Encountered unreferenceable "font" element in "defs" element
("id" attribute missing). For further information, see Use hyperlinks in a report. |
| GS-33163 | Encountered unreferenceable "image" element in "defs"
element ("id" attribute missing). For further information, see Use hyperlinks in a report. |
| GS-33164 | Encountered faulty "image" element in "defs" element ("href"
attribute missing). For further information, see Use hyperlinks in a report. |
| GS-33165 | Failed to create image file in directory
'directory' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33166 | Failed to create file "index.txt" in directory
'directory' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33167 | font id 'value' does not end with a style
digit. Error message and resolution should be self-explanatory. |
| GS-33168 | Failed to create WOFF font file
'file' For further information, see Font troubleshooting. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33169 | Failed to create TTF font file
'file' For further information, see Font troubleshooting. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33170 | Failed to create EOT font file
'file' For further information, see Font troubleshooting. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33171 | Failed to rename file 'file'.part Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33172 | Failed to create generic report design document from
template 'template' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33173 | Failed to create temporary generic report design document
file Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33174 | Printer 'printer' not found Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33175 | Failed to rename WOFF font file to
'name' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33176 | Failed to rename TTF font file to
'name' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33177 | Failed to close image file 'file'
(cause='value'} Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33178 | IOException closing file 'file'.
msg='value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33179 | Failed to rename EOR font file to
'name' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33180 | Failed to create file 'file' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33182 | Failed to parse 'value' as URL Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33184 | RTL attribute "name" not specified at 'value' For further information, see Using the expression language. |
| GS-33185 | RTL attribute "type" not specified at 'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33186 | Expression error: 'value' evaluating RTL expression
'expression' at attribute 'attribute' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33187 | Computed columns are supported only for absolute paths Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33188 | Attribute "type" not specified at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33189 | Invalid computed column type 'type' (must be one of:
'value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33190 | Attribute "name" not specified at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33191 | Attribute "expression" not specified at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33192 | The value 'value A' for the attribute "initializationLocation"
exeeds the value 'value B' of the path depth specified by the
"pathToContainingClass" attribute at 'value C' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33193 | The value 'value A' for the attribute "initializationLocation"
exeeds the value 'value B' of the path depth specified by the
"pathToContainingClass" attribute at 'value C' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33194 | The value 'value A' for the attribute "placementLocation" exeeds
the value 'value B' of the path depth specified by the "pathToContainingClass"
attribute at 'value C' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33195 | The value 'value A' for the attribute "placementLocation" is not
smaller or equal to the value 'value B' of the "placementLocation" at
'value C' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33196 | Path must be absolute Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33197 | No SortItems specified at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33198 | Got an exception of type 'value A' when attempting to connect to
the PJL printer 'printer' (cause='value B') For further information, see Print a report without a driver using PJL. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33199 | Got an exception of type 'type' when attempting to initialize PJL
job (cause='value') For further information, see Print a report without a driver using PJL. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33200 | Got an exception of type 'type' when attempting to initialize PJL
from IPP attributes (cause='value') For further information, see Print a report without a driver using PJL. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33201 | Got an exception of type 'type' when attempting to instantiate
Postscript optimizer (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33202 | Got an exception of type 'type' when attempting to create
destination file 'file' for writing (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33203 | Destination URI 'URI' doesnt denote a local file Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33204 | lpr printer options are not available on this platform Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33205 | Unknown transformation processor name 'value A' at 'value
B' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33206 | Unknown 'element' element in Aggregations element at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33207 | Unknown 'element' element in Grouping element at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33208 | Missing "path" attribute in Collection element at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33209 | Missing "collectionItemName" attribute in Collection element at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33210 | Unknown 'element' element in GroupBy element at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33211 | Missing "expression" attribute in GroupBy element at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33212 | Missing "name" attribute in GroupBy element at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33213 | Unknown 'element' element in GroupBy element at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33214 | Missing "name" attribute in input-variable element at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33215 | Missing "type" attribute in input-variable element at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33216 | Missing "path" attribute in Aggregation element at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33217 | Missing "name" attribute in Aggregation element at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33218 | Missing "rule" attribute in Aggregation element at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33219 | Missing "expression" attribute in Aggregation element at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33220 | Unknown 'element' element in GroupBy element at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33221 | CError computing aggregate "Min" from the RTL expression
'expression' since the computed value 'value' does not
implement the Comparable interface Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33222 | CError computing aggregate "Max" from the RTL expression
'expression' since the computed value 'value' does not
implement the Comparable interface Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33223 | This version supports stand alone licenses only Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33224 | Failed to highlight using a custom highlighter. Failed to invoke the static method
"CustomHighligher.highlight(Graphics2D,String,Rectangle2D.Double,Color,Color).
(cause='value'} Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33225 | PrintException during printing ('value A'), cause='value
B' Check your printer. |
| Number | Description |
|---|---|
| GS-33800 | Cannot open file Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33802 | Old file format. Use last version of Genero Report Designer
to update the file Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33803 | File format :" + version + " not supported. This executable
supports :" + SUPPORTED_VERSION_T Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33804 | logical page mapping is set to "labels" but
fgl_report_configureLabelOutput() was not called to configure the layout See fgl_report_configureLabelOutput. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33805 | cannot determine label width. Value was not set in call to
fgl_report_configureLabelOutput() and it is not set in the .4rp template. See fgl_report_configureLabelOutput. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33806 | cannot determine label height. Value was not set in call to
fgl_report_configureLabelOutput() and it is not set in the .4rp template. See fgl_report_configureLabelOutput. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33807 | environment variable GREDIR is not set Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33808 | environment variable FGLDIR is not set Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| Number | Description |
|---|---|
| GS-33900 | Unknown RTL variable type
'type' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33901 | Failed to initialize numeric RTL attribute variable from the
input string 'string' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33902 | Missing "url" attribute in RTL call-report element at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33903 | Missing RTL match element at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33904 | Missing RTL "name" attribute in entity declaration at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33905 | Missing "url" attribute in RTL load-entities element at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33906 | Missing "name" attribute in RTL expand-entity element at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33907 | Reference to undeclared RTL entity
'entity' at 'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33908 | Failed to replace RTL entity parameter
'parameter'. Parameter was not specified at 'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33909 | Missing "name" attribute in RTL entitiy parameter element at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33910 | Missing "value" attribute in RTL entitiy parameter element
at 'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33911 | Failed to find RTL style sheet root element at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33912 | Unknown RTL element 'value A' at
'value B' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33913 | Encountered style sheet element with more than one RTL
element at 'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33914 | Missing RTL elements in a sequences block at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33915 | Missing RTL alternatives in a or block at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33916 | Value for attribute 'attribute' cannot be
parsed as integer (Value='value') at RTL element
'element' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33917 | Invalid RTL attribute value selector
'value' in attribute constraint 'constraint A' at
'constraint B' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33918 | Failed to resolve namespace prefix 'value
A' in RTL constraint for 'value B' at 'value
C' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33919 | Failed to parse regular expresssion for RTL attribute
'attribute'. Error='value A' at 'value
B' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33920 | RTL attribute "name" not specified at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33921 | RTL attribute "type" not specified at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33922 | Illegal RTL location value 'value A' at
'value B' (must be one of "expectedHere", "expectedBefore", "expectedAhead" or
"expectedWayAhead" For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33923 | Error in input to RTL style: got token opening tag
'tag' when expecting 'value' For further information, see Using the expression language. |
| GS-33924 | Error in input to RTL style: got closing tag
'tag' when expecting 'value' For further information, see Using the expression language. |
| GS-33925 | Expression error: 'value A' evaluating
RTL expression 'expression' at attribute 'attribute' at
'value B' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33926 | Expression error: No variable value for variable
'variable' encountered in input stream when evaluating RTL expression
'expression' at attribute 'attribute' at
'value' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33927 | Expression error: 'value A' evaluating
RTL expression 'expression' at attribute 'attribute' at
'value B' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33928 | Type error: Expression 'expression'
yielded null instead of a 'value A' value at RTL attribute 'value
B' at 'value C' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33929 | Type error: Expression 'expression'
yielded 'value A' instead of a 'value B' value at RTL
attribute 'attribute' at 'value C' For further information, see Using the expression language. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33930 | Reference to unknown global RTL method
'value' For further information, see Using the expression language. |
| GS-33931 | Unknown RTL method 'value' in the current
context of type 'type' For further information, see Using the expression language. |
| GS-33932 | Unknown RTL method 'value' on object of
type 'type' For further information, see Using the expression language. |
| GS-33933 | Wrong number of aguments supplied to method "'value
A'.substring" (Expected 2 or 3, got 'value B') For further information, see The String Class. |
| GS-33934 | 'value A' to 'value B'
conversion error in RTL function "'value C'.toNum()" (cannot parse value
'value D' as 'value E') For further information, see Using the expression language. |
| GS-33935 | Illegal access error. Not able to call RTL method
'method' on object of type 'type'
(cause='value') For further information, see Using the expression language. |
| GS-33936 | Error executing RTL method 'method' on
object of type 'type' (cause='value') For further information, see Using the expression language. |
| GS-33937 | Wrong number of args supplied to RTL method "'value
A'.'value B'" (Expected 'value C', got
'value D') For further information, see Using the expression language. |
| GS-33938 | Invalid type for argument no 'value A' in
call to RTL method "'value B'.'value C'" (Expected
'value D', got 'value E') For further information, see Using the expression language. |
| GS-33939 | Invalid null argument for argument no
'value' in call to RTL method 'method' For further information, see Using the expression language. |
| GS-33940 | Illegal access error. Not able to obtain value of RTL
variable 'variable' on obbject of type 'type'
(cause='value') For further information, see Using the expression language. |
| GS-33941 | Internal error: Attempt to reference an RTL array element on
a null pointer (key='value') For further information, see Using the expression language. |
| GS-33942 | Attempt to reference an RTL array element on a non array
object of type 'type' (key='value') For further information, see Using the expression language. |
| GS-33943 | Internal RTL error: Can't find character context For further information, see Using the expression language. |
| GS-33944 | RTL attribute "name" not specified in rtl:array
element Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33945 | RTL attribute "key" not specified in rtl:array
element Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33946 | RTL attribute "name" not specified in rtl:let element at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33947 | RTL attribute "value" not specified in rtl:let element at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33948 | Undeclared RTL variable 'variable' at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33949 | RTL attribute "name" not specified at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33950 | Expression error 'value A' retrieving
value of RTL variable 'variable' at 'value B' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33951 | Unknown RTL variable 'variable' at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33952 | RTO variable 'variable' in rtl:array-let
element is not of type array but of type 'type' at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33953 | RTL attribute "key" not specified at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33954 | RTL expression 'expression' in attribute
"key" evaluated to null at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33955 | RTL attribute "name" not specified at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33956 | RTL expression 'expression' in attribute
"key" evaluated to null at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33957 | RTL attribute "name" not specified at
'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33958 | Internal RTL error: Failed to find "toCharacter" For further information, see Using the expression language. |
| GS-33959 | Encountered RTL 'element A' element
containing an invalid element 'element B' at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33960 | missing "enumeration" attribute value in RTL "for-each"
element encountered at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33961 | Invalid object type 'type' returned for
RTL attribute "enumeration" in a "for-each" element. Expected expression
'expression' to return enumeration type at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33962 | Missing RTL "condition" attribute value in "while" element
encountered at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33963 | Internal RTL error: Order of calls violated For further information, see Using the expression language. |
| GS-33964 | Illegal trailing '.' in RTL identifier For further information, see Using the expression language. |
| GS-33965 | Redefinition of RTL identifier 'value' of
type 'type' as record For further information, see Using the expression language. |
| GS-33966 | 'value A' to 'value B'
conversion error in RTL function "'value C'.toNumeric()" (cannot parse value
'value D' as 'value E') For further information, see Using the expression language. |
| GS-33967 | Date.fromString(): Failed to parse date value
'value' with pattern 'pattern' For further information, see The Date Class. |
| GS-33968 | Date.parseString(): Failed to parse date value
'value' with pattern 'pattern' For further information, see The Date Class. |
| GS-33970 | Missing "schemaFileName" attribute in ReportSchemaTransform
element at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-33973 | Unknown transformation processor name
'name' at 'value' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| Number | Description |
|---|---|
| GS-34200 | Internal error: uri is not allowed to be null |
| GS-34201 | Internal error: localName is not allowed to be null |
| GS-34202 | Internal error: uri is not allowed to be null |
| GS-34203 | Internal error: localName is not allowed to be null |
| GS-34204 | Internal error: uri is not allowed to be null |
| GS-34205 | Internal error: localName is not allowed to be null |
| GS-34206 | Internal error: uri is not allowed to be null |
| GS-34207 | Internal error: localName is not allowed to be null |
| GS-34208 | Internal error: uri is not allowed to be null |
| GS-34209 | Internal error: '0'-'3' or 'u' expected after '\': 'value' |
| GS-34210 | Internal error: '0'-'7' or 'u' expected after '\': 'value' |
| GS-34213 | Unmatched quote at end of string
'value'} Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34214 | Unmatched quote in string 'string' at
position 'position' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34215 | failed to map file 'file' into memory.
Reason: 'value' Error message and resolution should be self-explanatory. |
| GS-34216 | corrupted file 'file'. Corruption type:
1 Error message and resolution should be self-explanatory. |
| GS-34217 | corrupted file 'file'. Corruption type:
2 Error message and resolution should be self-explanatory. |
| GS-34218 | corrupted file 'file'. Corruption type:
3 Error message and resolution should be self-explanatory. |
| GS-34219 | corrupted file 'file'. Corruption type: 3
at position 'value' Error message and resolution should be self-explanatory. |
| GS-34220 | Internal error: Encountered open Edge |
| GS-34221 | Internal error: Encountered open CharacterEdge |
| Number | Description |
|---|---|
| GS-34500 | Internal error: Element.getLocalName() returned null. Apparantly the document was modified using DOM Level 1 functions |
| GS-34501 | Attribute type error: Expected integer value for attribute
'attribute' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34502 | Attribute type error: Expected long value for attribute
'attribute' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34503 | Attribute type error: Expected double value for attribute
'attribute' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34504 | Attribute type error: Expected boolean value for attribute
'attribute' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34505 | Failed to parse value 'value A' as URL
(cause='value B') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34506 | Cannot resolve relative URL 'URL'. Have
no system id to absolutize against. Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34507 | Failed to parse "systemId" value 'value
A' as URI (cause='value B') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34508 | Failed to create absolute URL from
systemId='value' and URL='URL' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34509 | Internal error: failed to convert URI
'URI' to URL (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34510 | Internal error: location path contains unparsable value (path='value'). |
| GS-34511 | Cannot load document 'document'. Have
"FactoryConfigurationError" (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34512 | Cannot load document 'document'. Have
"ParserConfigurationError" (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34513 | Cannot load document 'document'. Have
"SAXParseException" (cause='value') at line 'line' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34514 | Cannot load document 'document'. Have
"SAXException" (type='type', cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34515 | Cannot load document 'document'. Have
"IOException" (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34516 | Encountered "IOException" trying obtain input stream for URL
'URL' (cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-34517 | Failed to convert File 'file' to a URI
(cause='value') Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| Number | Description |
|---|---|
| GS-34800 | Internal error: Can't find element denoted by the path
'path' in the document fragment 'value' Error message and resolution should be self-explanatory. |
| Number | Description |
|---|---|
| GS-35400 | Internal error: pushString called on function 'function'. The function takes only one numeric parameter |
| GS-35401 | Internal error: getStringReturnValue called on function 'function'. The function returns a numeric value |
| GS-35402 | Internal error: pushString called on function 'function'. The function takes only two numeric parameters |
| GS-35403 | Internal error: getStringReturnValue called on function 'function'. The function returns a numeric value |
| GS-35404 | RTL expression error: Illegal access error. Not able to
obtain value of variable 'variable' on object of type 'type'
(cause='value') For further information, see Using the expression language. |
| GS-35405 | RTL expression error: Illegal array or array index. Not able
to obtain array value for index 'index' on List of type 'type'
(err='value') For further information, see Using the expression language. |
| GS-35406 | RTL expression error: Illegal array index. Not able to
obtain array value for index 'index' on List of type 'type'
(cause='value') For further information, see Using the expression language. |
| GS-35407 | RTL expression error: Unable to resolve non numeric key
'key' on array of type 'type' (Non numeric arguments can only
be used on "Map" arrays) For further information, see Using the expression language. |
| GS-35408 | Unknown media type 'type' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-35409 | Unknown media type 'type' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-35410 | Unexpected extra text 'text' at end of
PXML expression 'expression' Error message and resolution should be self-explanatory. |
| GS-35411 | Unexpected extra text 'text' at end of
PXML string expression 'expression' Error message and resolution should be self-explanatory. |
| GS-35412 | Unexpected token 'token' in PXML
expression. Expected else operator ':' in ternary conditional expression Error message and resolution should be self-explanatory. |
| GS-35413 | Unexpected token 'token' following '|' in
PXML expression Error message and resolution should be self-explanatory. |
| GS-35414 | Unexpected token 'token' following
'&' in PXML expression Error message and resolution should be self-explanatory. |
| GS-35415 | Unexpected token 'token' following
'value' in PXML expression Error message and resolution should be self-explanatory. |
| GS-35416 | Unexpected end of PXML expression Error message and resolution should be self-explanatory. |
| GS-35417 | Type error: illegal call to PXML function
'function' returning 'value' while expecting a function that
returns a numeric value For further information, see PXML functions. |
| GS-35418 | Expected enumeration identifier for parameter number
'number' in call to PXML function 'function' but got
'value' instead For further information, see PXML functions. |
| GS-35419 | Missing function arguments in call to PXML function
'function'. Expected 'value A' parameters but found
'value B' instead For further information, see PXML functions. |
| GS-35420 | Missing ')' in call to PXML function
'value' For further information, see PXML functions. |
| GS-35421 | Unmatched '(' in PXML expression For further information, see Defining PXML expressions. |
| GS-35422 | Internal error in PXML expression (unexpected token
'token') For further information, see Defining PXML expressions. |
| GS-35423 | Unexpected end of PXML string expression For further information, see Defining PXML expressions. |
| GS-35424 | Type error: illegal call to PXML function
'function' returning 'value' when expecting a function that
returns a string value For further information, see Defining PXML expressions. |
| GS-35425 | Expected enumeration identifier for parameter number
'number' in call to PXML string function 'function' but got
'value' instead For further information, see Defining PXML expressions. |
| GS-35426 | Missing function arguments in call to PXML string function
'function' (Expected 'value A' parameters but found
'value B') For further information, see Defining PXML expressions. |
| GS-35427 | Missing ')' in call to PXML string function
'function' For further information, see Defining PXML expressions. |
| GS-35428 | Unmatched '(' in PXML string expression For further information, see Defining PXML expressions. |
| GS-35429 | Invalid operator in expression: 'value A'
('value B') For further information, see Using the expression language. |
| GS-35430 | Unexpected extra token 'token' at end of
RTL expression 'expression' For further information, see Using the expression language. |
| GS-35431 | Unexpected token 'token' in RTL
expression. Expected else operator ':' in ternary conditional expression For further information, see Using the expression language. |
| GS-35432 | Error in RTL conditional expression: Expected
'value A' value to precede '?' operator but got a 'value B'
value For further information, see Using the expression language. |
| GS-35433 | Error in RTL conditional or expression: Expected left
operand to be of type 'type' but got a 'value' value For further information, see Using the expression language. |
| GS-35434 | Error in RTL conditional or expression: Expected right
operand to be of type 'type' but got a 'value' value For further information, see Using the expression language. |
| GS-35435 | Error in RTL conditional and expression: Expected left
operand to be of type 'type' but got a 'value' value For further information, see Using the expression language. |
| GS-35436 | Error in RTL conditional and expression: Expected right
operand to be of type 'type' but got a 'value' value For further information, see Using the expression language. |
| GS-35437 | RTL expression error: Relational operator ">=" cannot be
applied to types 'type A','type B' Error message and resolution should be self-explanatory. |
| GS-35438 | RTL expression error: Relational operator ">" cannot be
applied to types 'type A','type B' Error message and resolution should be self-explanatory. |
| GS-35439 | RTL expression error: Relational operator "<=" cannot be
applied to types 'type A','type B' Error message and resolution should be self-explanatory. |
| GS-35440 | RTL expression error: Relational operator "<" cannot be
applied to types 'type A','type B' Error message and resolution should be self-explanatory. |
| GS-35441 | RTL expression error: Operator '+' cannot be applied to
'value A','value B' Error message and resolution should be self-explanatory. |
| GS-35442 | RTL expression error: Operator '-' cannot be applied to
'value A','value B' Error message and resolution should be self-explanatory. |
| GS-35443 | RTL expression error: Operator '*' cannot be applied to
'value A','value B' Error message and resolution should be self-explanatory. |
| GS-35444 | RTL expression, type mismatch: cannot multiply value of type
'type' Error message and resolution should be self-explanatory. |
| GS-35445 | RTL expression, division failed
(cause='value') Error message and resolution should be self-explanatory. |
| GS-35446 | RTL expression: Operator '/' cannot be applied to
'value A','value B' For further information, see Using the expression language. |
| GS-35447 | RTL expression, integer division failed
(cause='value') For further information, see Using the expression language. |
| GS-35448 | RTL expression error: Operator '%%' cannot be applied to
'value A','value B' For further information, see Using the expression language. |
| GS-35449 | RTL expression error: Illegal array index value
(null) For further information, see Using the expression language. |
| GS-35450 | RTL expression error: Unexpected token
'token' ('value' following array index expression. Expected
']' to terminate expression For further information, see Using the expression language. |
| GS-35451 | RTL expression error: Cannot negate object of type
'type' For further information, see Using the expression language. |
| GS-35452 | RTL expression error: Cannot perform logical negation on an
object of type 'type' For further information, see Using the expression language. |
| GS-35453 | Unexpected end of RTL expression For further information, see Using the expression language. |
| GS-35454 | RTL expression error: Unexpected token
'token' ('value' in call to function
'function'. Expected either ',' or ')'. For further information, see Using the expression language. |
| GS-35455 | RTL expression error: Unmatched '(' For further information, see Using the expression language. |
| GS-35456 | RTL expression errror: Unexpected token
'token' (type='value') For further information, see Using the expression language. |
| GS-35457 | ExpressionTokenizer: Internal error: pushBack() called more
than once in a row. For further information, see Using the expression language. |
| GS-35458 | Invalid character 'character' in
expression 'expression' For further information, see Using the expression language. |
| GS-35459 | Unexpected end of expression in expression
'expression', was expecting 'value' For further information, see Using the expression language. |
| GS-35460 | Unexpected character 'character' in
expression 'expression', was expecting 'value' For further information, see Using the expression language. |
| GS-35461 | Failed to parse numeric value
'value' Error message and resolution should be self-explanatory. |
| GS-35462 | Failed to parse 'value' as a numeric
value for the RTL variable 'variable' Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-35463 | Unknown function 'function' Error message and resolution should be self-explanatory. |
| GS-35464 | Unknown function "'function'()" Error message and resolution should be self-explanatory. |
| GS-35465 | Unknown function "'value
A'('value B')" Error message and resolution should be self-explanatory. |
| GS-35466 | Unknown PXML unit 'value' For further information, see Unit Names. |
| GS-35467 | Unknown variable 'variable' Error message and resolution should be self-explanatory. |
| GS-35468 | Unexpected token "" + TOKEN_NAMES[ttype] + "" in PXML string
expression For further information, see Defining PXML expressions. |
| Number | Description |
|---|---|
| GS-36000 | Invalid '=' character in option
'value' Error message and resolution should be self-explanatory. |
| GS-36001 | Internal error: Invalid usage |
| GS-36002 | Invalid option 'option'. Expected '-'
to start option Error message and resolution should be self-explanatory. |
| GS-36003 | Invalid option 'option'. Expected option
name to follow '-' Error message and resolution should be self-explanatory. |
| GS-36004 | Invalid option 'option'. Expected option
name to follow "--" Error message and resolution should be self-explanatory. |
| GS-36005 | Unknown option 'option' Error message and resolution should be self-explanatory. |
| GS-36006 | Missing required argument for option
'option'. Error message and resolution should be self-explanatory. |
| Number | Description |
|---|---|
| GS-36300 | Unexpected extra text at end of expression at
'value A' (c='value B') Error message and resolution should be self-explanatory. |
| GS-36301 | Unexpected end of expression Error message and resolution should be self-explanatory. |
| GS-36302 | Missing ']' at 'value' Error message and resolution should be self-explanatory. |
| GS-36303 | Missing ')' at 'value' Error message and resolution should be self-explanatory. |
| GS-36305 | Expected character to follow '-' at
'value' Error message and resolution should be self-explanatory. |
| GS-36306 | Expected character to follow '[' at
'value' Error message and resolution should be self-explanatory. |
| GS-36307 | Internal error: Called unread() more than once at 'value' |
| GS-36308 | Internal error: Called unread() more than once at 'value' |
| GS-36309 | Invalid escape "\'value A' at
'value B' Error message and resolution should be self-explanatory. |
| Number | Description |
|---|---|
| GS-36600 | Unknown external reference
'reference' Error message and resolution should be self-explanatory. |
| GS-36601 | Internal error: Tokenizer returned invalid values n='value' |
| GS-36603 | Internal error: Tokenizer returned invalid values m='value' |
| GS-36604 | Internal error: Tokenizer returned invalid values n='value A' m='value B' |
| GS-36606 | Internal error: got internal reference token allthough the stream claims not to produce these |
| GS-36607 | Reference index 'index' out of range
(max='value' Error message and resolution should be self-explanatory. |
| GS-36608 | found recursive external reference
'reference'. Stack='value' Error message and resolution should be self-explanatory. |
| GS-36609 | Line does not consist of two space separated fields Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-36610 | Expression file is empty Tip:
This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document. |
| GS-36611 | Unexpected end of expression Error message and resolution should be self-explanatory. |
| GS-36613 | Unexpected EOF in control character specification Error message and resolution should be self-explanatory. |
| GS-36614 | Illegal control character specification
"\c'value'" Error message and resolution should be self-explanatory. |
| GS-36615 | Unexpected EOF in external reference Error message and resolution should be self-explanatory. |
| GS-36616 | Expected '{' character to follow \R in external reference.
Got 'value'' instead Error message and resolution should be self-explanatory. |
| GS-36617 | Unclosed external reference Error message and resolution should be self-explanatory. |
| GS-36618 | Unexpected EOF in tracked external reference Error message and resolution should be self-explanatory. |
| GS-36619 | Expected '{' character to follow \R in a tracked external
reference. Got 'value' instead Error message and resolution should be self-explanatory. |
| GS-36620 | Unclosed tracked external reference Error message and resolution should be self-explanatory. |
| GS-36621 | Unexpected EOF in marker definition Error message and resolution should be self-explanatory. |
| GS-36622 | Expected '{' character to follow \M in marker definition.
Got 'value' instead Error message and resolution should be self-explanatory. |
| GS-36623 | Unclosed marker definition Error message and resolution should be self-explanatory. |
| GS-36627 | Expected '{' character to follow \p in character class
definition. Got 'value' instead Error message and resolution should be self-explanatory. |
| GS-36628 | Unclosed character class definition Error message and resolution should be self-explanatory. |
| GS-36629 | Unknown character class name
'name' Error message and resolution should be self-explanatory. |
| GS-36630 | Invalid escape "\'value'" Error message and resolution should be self-explanatory. |
| GS-36631 | Unclosed character class Error message and resolution should be self-explanatory. |
| GS-36632 | illegal digit 'digit' in range
modifier Error message and resolution should be self-explanatory. |
| GS-36633 | Unclosed range modifier Error message and resolution should be self-explanatory. |
| GS-36634 | Upper range value smaller than lower range value in range
modifier Error message and resolution should be self-explanatory. |
| GS-36635 | Invalid range values ('value
A','value B') in range modifier Error message and resolution should be self-explanatory. |
| GS-36636 | Invalid range value ('value',) in range
modifier Error message and resolution should be self-explanatory. |
| GS-36637 | Invalid range value (,'value') in range
modifier Error message and resolution should be self-explanatory. |
| GS-36638 | Illegal range modifier Error message and resolution should be self-explanatory. |
| GS-36639 | Empty range modifier Error message and resolution should be self-explanatory. |
| GS-36640 | Failed to find an element definition Error message and resolution should be self-explanatory. |
| GS-36641 | Failed to find referenced element Error message and resolution should be self-explanatory. |
| GS-36642 | Failed to find complexType element Error message and resolution should be self-explanatory. |
| GS-36643 | Failed to find simpleType element Error message and resolution should be self-explanatory. |
| GS-36644 | Failed to find attribute declaration Error message and resolution should be self-explanatory. |
| GS-36645 | Failed to find attribute group declaration Error message and resolution should be self-explanatory. |
| GS-36646 | Failed to find group declaration Error message and resolution should be self-explanatory. |
| GS-36647 | Neither "ref" nor "name" Attributes not set on attribute
group Error message and resolution should be self-explanatory. |
| GS-36648 | Neither "ref" nor "name" Attributes not set on
attribute Error message and resolution should be self-explanatory. |
| GS-36649 | Encountered empty simpleType Error message and resolution should be self-explanatory. |
| GS-36650 | Encountered extension without base declaration Error message and resolution should be self-explanatory. |
| GS-36651 | Encountered restriction without base declaration Error message and resolution should be self-explanatory. |
| GS-36652 | Neither "ref" nor "name" Attributes not set on
element Error message and resolution should be self-explanatory. |
| GS-36653 | maxOccurs has value 0 in particle Error message and resolution should be self-explanatory. |
| GS-36654 | maxOccurs is smaller than minOccurs in particle Error message and resolution should be self-explanatory. |
| GS-36656 | Internal error: Unknown type 'type' |
| Number | Description |
|---|---|
| GS-37200 | Failed to find PXML node in template Error message and resolution should be self-explanatory. |
| GS-37206 | Failed to find RTL "stylesheet" element in
template Error message and resolution should be self-explanatory. |
| GS-37207 | Failed to find element named 'name' in
schema Error message and resolution should be self-explanatory. |
| GS-37208 | Failed to find match node named 'name' in
template Error message and resolution should be self-explanatory. |
| GS-37209 | Failed to find root element 'element' in
schema file 'file' Error message and resolution should be self-explanatory. |
| GS-37210 | Failed to find RTL root match node in template Error message and resolution should be self-explanatory. |
| GS-37211 | Failed to find root element 'element' in
rdd schema file 'file' Error message and resolution should be self-explanatory. |
| GS-37212 | Missing "schemaFileName" attribute in ReportSchemaTransform
element at 'value' Error message and resolution should be self-explanatory. |
| GS-37213 | Missing "collectionName" attribute in CollectionWrapper
element at 'value' Error message and resolution should be self-explanatory. |
| GS-37214 | Missing "itemToShift" attribute in SiblingShifter element at
'value' Error message and resolution should be self-explanatory. |
| GS-37215 | Missing "insertPoints" attribute in SiblingShifter element
at 'value' Error message and resolution should be self-explanatory. |
| GS-37216 | Failed to find item 'item' for shifting
specified in SiblingShifter element at 'value' Error message and resolution should be self-explanatory. |
| GS-37217 | Missing "collectionGroupName" attribute in CollectionGrouper
element at 'value' Error message and resolution should be self-explanatory. |
| GS-37218 | Missing "groupingExpression" attribute in CollectionGrouper
element at 'value' Error message and resolution should be self-explanatory. |
| GS-37219 | Failed to parse "placementLocation" value 'value
A' as integer in CollectionAggregator element at 'value B' Error message and resolution should be self-explanatory. |
| GS-37220 | Failed to find trigger path 'path'
For more information, see Triggers. |
| GS-37221 | Failed to find trigger 'trigger A' in
parent trigger 'trigger B' For more information, see Triggers. |
| GS-37222 | Missing "collectionItemName" attribute in element at
'value' Error message and resolution should be self-explanatory. |
| GS-37223 | Missing "collectionGroupName" attribute in CollectionGrouper
element at 'value' Error message and resolution should be self-explanatory. |
| Number | Description |
|---|---|
| GS-37400 | Missing "name" attribute on "input-variable"
element Error message and resolution should be self-explanatory. |
| GS-37401 | Missing "type" attribute on "input-variable"
element Error message and resolution should be self-explanatory. |
| GS-37402 | Unrecognized "type" value 'value' on
"input-variable" element Error message and resolution should be self-explanatory. |
| GS-37403 | Missing "expectedLocation" attribute on "input-variable"
element Error message and resolution should be self-explanatory. |
| GS-37404 | Unrecognized "expectedLocation" value
'value' on "input-variable" element Error message and resolution should be self-explanatory. |
| GS-37405 | Missing "name" attribute on "match" element Error message and resolution should be self-explanatory. |
| GS-37406 | Missing "nameConstraint" attribute on "match"
element Error message and resolution should be self-explanatory. |
| GS-37407 | Missing "name" attribute on "Collection" element Error message and resolution should be self-explanatory. |
| GS-37409 | Missing "name" attribute on "Field" element Error message and resolution should be self-explanatory. |
| GS-37410 | Missing "type" attribute on "Field" element Error message and resolution should be self-explanatory. |
| GS-37411 | Unrecognized "type" value 'value' on
"Field" element Error message and resolution should be self-explanatory. |