Send administrative messages to user agents

You can send administrative messages to user agents with the gasadmin send-message command.

The gasadmin send-message command allows an administrator of the GAS to send messages to connected users on the specified applications and sessions, or to connected user on all sessions running in the GAS.

The message can be a simple notification message, such as the server needs to restart, or the service will be unavailable due to maintenance at a specified date and time, and so on. The message length must be limited to 3066 bytes to avoid exceeding the HTTP header maximum length of 4096 bytes.

To send a message to connected users on all sessions running in the GAS, use the following command.

gasadmin send-message "The server will be shutting down in 10 minutes."

The user will see the message displayed on the front-end. The message will appear in the application interface Chromebar of the Genero Browser Client. No response is expected from the user.

The next paragraphs show examples of different uses of the command. (Line breaks have been added to the command examples to improve readability.)

Example 1: Send message to the specified applications

Specify the application by name. While you typically include both the group and the application name using the format "--app group-name/app-name", you must not include the group when the application is in the _default application group. For applications in the _default group, simply provide the application name using the format "--app app-name".

gasadmin send-message --app demo 
                      --app mygroup/myapp "hello world"

Example 2: Send message to the specified sessions

Specify the session with its session-id.

gasadmin send-message --session b509ade99204f7cfc91726deba36dee6 
                      --session 3e65a8fc5b10fa2f57cda0c44466cb74c7722a28 "hello world"

Example 3: Send message to the specified applications and sessions

The options --app and --session can be repeated and can be specified in any order.

gasadmin send-message --app demo  
                      --session b509ade99204f7cfc91726deba36dee6 
                      --app mygroup/myapp 
                      --session 3e65a8fc5b10fa2f57cda0c44466cb74c7722a28 "hello world"

Example 4: Send message to lists of applications and sessions

The options --app and --session can can take a comma-separated list of values.

gasadmin send-message --app demo,mygroup/myapp
                      --session b509ade99204f7cfc91726deba36dee6,3e65a8fc5b10fa2f57cda0c44466cb74c7722a28
                       "hello world"

Handle user inactivity

In case of user inactivity at the time of the broadcast, the message will be displayed when the front-end next sends a response via the USER_AGENT ping request to keep the session alive. The default $app.timeout.useragent setting in the GAS configuration file (as.xcf) is 300 seconds. The GAS administrator should allow for this timeout delay before taking any action such as shutting down the server.

The USER_AGENT ping is configurable per application, but it is recommended you use the same timeout for all applications, and when starting the dispatcher provide the value via the override -E option as follows:

httpdispatch -E app.timeout.useragent=300