Use this procedure to configure multiple Android™ display devices. For example, you may have an Android phone, tablet, and
emulator.
By default, the device ID is not set in the
Display client configuration and Genero Studio uses the default configuration
for the first connected device it finds.
If you have multiple devices connected (by USB or as emulators started from Android Studio), create separate configurations where each configuration specifies one of
the connected devices. The device is identified by its device ID.
Select Tools > Android Tools > List Devices. The list of connected devices appears in
the Output view along with their respective device IDs.
Android virtual devices are considered
devices by this utility and appear in the list.
::info:(GS-09007) Listing Android devices
List of devices attached
emulator-5556 device
emulator-5554 device
06dc3f26 device
::info:(GS-09007) List devices finished successfully
Copy the device ID of a device.
For example, a device ID may read "emulator-5554".
Tip: If you have multiple devices listed and you are not sure which one is the right
one, disconnect all of them except the one you wish to configure.
From the Genero Configuration Management
dialog, click the Edit display client configurations icon, located next to
the Use Display Client combobox.
In the Display Client management dialog, enter the
ID into the Device ID field. You may edit the default configuration or add
new Display Client configurations.
Create a separate Genero configuration for each Android device you have connected.
Add a new Display Client configuration.
Enter the device ID into the Device ID field.
Enter a port number for the device in the Port field
We recommend having a different port for each client available on the client machine. For
example:
6500 for an Android Nexus 7
device
6501 for an Android Nexus 5
device
6502 for an Android Emulator
and so on.
You can have all devices connected and the emulator started. Selecting a Genero Configuration now
specifies which device to use.
