Enum Class Codes.Characteristic
- All Implemented Interfaces:
Serializable, Comparable<Codes.Characteristic>, java.lang.constant.Constable
- Enclosing class:
Codes
Characteristic: BT-X-11
-
Nested Class Summary
Nested classes/interfaces inherited from class Enum
Enum.EnumDesc<E> -
Enum Constant Summary
Enum ConstantsEnum ConstantDescriptionConsolidated weight
The functiongetCode()returns "A" for this value
The functiongetName()returns "Consolidated weight" for this value
The functiongetDescription()returns "The measured consolidated weight." for this valueNet weight
The functiongetCode()returns "AAA" for this value
The functiongetName()returns "Net weight" for this value
The functiongetDescription()returns "Weight of goods including any packaging that normally going with the goods." for this valueGoods item gross weight
The functiongetCode()returns "AAB" for this value
The functiongetName()returns "Goods item gross weight" for this value
The functiongetDescription()returns "Weight (mass) of goods including packing but excluding the carrier's equipment." for this valueTotal net weight
The functiongetCode()returns "AAC" for this value
The functiongetName()returns "Total net weight" for this value
The functiongetDescription()returns "Total weight of goods excluding packaging." for this valueConsignment gross weight
The functiongetCode()returns "AAD" for this value
The functiongetName()returns "Consignment gross weight" for this value
The functiongetDescription()returns "Total gross weight (mass) of all goods items referred to as one consignment including packaging but excluding any transport equipment." for this valueNet net weight
The functiongetCode()returns "AAF" for this value
The functiongetName()returns "Net net weight" for this value
The functiongetDescription()returns "Weight (mass) if goods without any packaging." for this valueStern thrust
The functiongetCode()returns "AAG" for this value
The functiongetName()returns "Stern thrust" for this value
The functiongetDescription()returns "Force exerted by a thruster installed at the stern of a vessel." for this valueBow thrust
The functiongetCode()returns "AAH" for this value
The functiongetName()returns "Bow thrust" for this value
The functiongetDescription()returns "Force exerted by a thruster installed at the bow of a vessel." for this valueHydrate content of an alcoholic product at bottling
The functiongetCode()returns "AAI" for this value
The functiongetName()returns "Hydrate content of an alcoholic product at bottling" for this value
The functiongetDescription()returns "The hydrate content of an alcoholic product at the moment of bottling." for this valueNumber of units per pallet
The functiongetCode()returns "AAJ" for this value
The functiongetName()returns "Number of units per pallet" for this value
The functiongetDescription()returns "The number of units contained on a pallet." for this valueFat content
The functiongetCode()returns "AAK" for this value
The functiongetName()returns "Fat content" for this value
The functiongetDescription()returns "An indication of the fat content of a product." for this valueTransport means gross weight
The functiongetCode()returns "AAM" for this value
The functiongetName()returns "Transport means gross weight" for this value
The functiongetDescription()returns "The measure of the overall size of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships." for this valueNet tonnage of the vessel
The functiongetCode()returns "AAN" for this value
The functiongetName()returns "Net tonnage of the vessel" for this value
The functiongetDescription()returns "The measure of the useful capacity of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships." for this valueHumidity
The functiongetCode()returns "AAO" for this value
The functiongetName()returns "Humidity" for this value
The functiongetDescription()returns "Degree of moisture." for this valueVoltage
The functiongetCode()returns "AAP" for this value
The functiongetName()returns "Voltage" for this value
The functiongetDescription()returns "Electromotive force, or difference of electronic potential between two points." for this valuePower consumption
The functiongetCode()returns "AAQ" for this value
The functiongetName()returns "Power consumption" for this value
The functiongetDescription()returns "Value of energy consumption." for this valueHeat dissipation
The functiongetCode()returns "AAR" for this value
The functiongetName()returns "Heat dissipation" for this value
The functiongetDescription()returns "Measurement of the rate of dispersal of heat." for this valueAir flow
The functiongetCode()returns "AAS" for this value
The functiongetName()returns "Air flow" for this value
The functiongetDescription()returns "Measurement of the flow of air." for this valueShock impact
The functiongetCode()returns "AAT" for this value
The functiongetName()returns "Shock impact" for this value
The functiongetDescription()returns "Measurement of the impact of a shock." for this valueOperative temperature
The functiongetCode()returns "AAU" for this value
The functiongetName()returns "Operative temperature" for this value
The functiongetDescription()returns "Temperature identified system or process works according to specifications." for this valueNon operative temperature
The functiongetCode()returns "AAV" for this value
The functiongetName()returns "Non operative temperature" for this value
The functiongetDescription()returns "Temperature identified system or process does not work according to specifications." for this valueGross volume
The functiongetCode()returns "AAW" for this value
The functiongetName()returns "Gross volume" for this value
The functiongetDescription()returns "The volume unadjusted for factors such as temperature or gravity." for this valueNet volume
The functiongetCode()returns "AAX" for this value
The functiongetName()returns "Net volume" for this value
The functiongetDescription()returns "The volume after adjustment for factors such as temperature or gravity." for this valueWater content
The functiongetCode()returns "AAY" for this value
The functiongetName()returns "Water content" for this value
The functiongetDescription()returns "Water content in product." for this valueTensile stress
The functiongetCode()returns "AAZ" for this value
The functiongetName()returns "Tensile stress" for this value
The functiongetDescription()returns "The measured tensile stress." for this valueFibrosity
The functiongetCode()returns "ABA" for this value
The functiongetName()returns "Fibrosity" for this value
The functiongetDescription()returns "The measured fibrosity." for this valueGauge length
The functiongetCode()returns "ABB" for this value
The functiongetName()returns "Gauge length" for this value
The functiongetDescription()returns "The measured gauge length." for this valueRadius
The functiongetCode()returns "ABC" for this value
The functiongetName()returns "Radius" for this value
The functiongetDescription()returns "The measured radius." for this valueStraightness
The functiongetCode()returns "ABD" for this value
The functiongetName()returns "Straightness" for this value
The functiongetDescription()returns "Straightness of the item." for this valueStrain
The functiongetCode()returns "ABE" for this value
The functiongetName()returns "Strain" for this value
The functiongetDescription()returns "The measured strain." for this valueItem width when unrolled
The functiongetCode()returns "ABF" for this value
The functiongetName()returns "Item width when unrolled" for this value
The functiongetDescription()returns "The width of an item when unrolled." for this valueItem length when unrolled
The functiongetCode()returns "ABG" for this value
The functiongetName()returns "Item length when unrolled" for this value
The functiongetDescription()returns "The length of an item when unrolled." for this valueItem area when unrolled
The functiongetCode()returns "ABH" for this value
The functiongetName()returns "Item area when unrolled" for this value
The functiongetDescription()returns "The area occupied by an item when unrolled." for this valueOriginal wort
The functiongetCode()returns "ABI" for this value
The functiongetName()returns "Original wort" for this value
The functiongetDescription()returns "Measure of the malt and hops content of beer, before fermentation has taken place." for this valueVolume
The functiongetCode()returns "ABJ" for this value
The functiongetName()returns "Volume" for this value
The functiongetDescription()returns "The amount of air space taken up by the entity identified in the 6311 qualifier." for this valueAngle
The functiongetCode()returns "ABK" for this value
The functiongetName()returns "Angle" for this value
The functiongetDescription()returns "The angle of an object." for this valuePeg hole horizontal distance from package leftmost edge
The functiongetCode()returns "ABL" for this value
The functiongetName()returns "Peg hole horizontal distance from package leftmost edge" for this value
The functiongetDescription()returns "Horizontal distance from the left most edge of the package to the center of the hole into which the peg is inserted." for this valuePeg hole vertical distance from package top
The functiongetCode()returns "ABM" for this value
The functiongetName()returns "Peg hole vertical distance from package top" for this value
The functiongetDescription()returns "Vertical distance from the top of the package to the top of the hole into which the peg is inserted." for this valueNumber of layers per pallet
The functiongetCode()returns "ABN" for this value
The functiongetName()returns "Number of layers per pallet" for this value
The functiongetDescription()returns "The number of layers per pallet." for this valueProduct strengh, chemical
The functiongetCode()returns "ABO" for this value
The functiongetName()returns "Product strengh, chemical" for this value
The functiongetDescription()returns "The amount of the single active chemical ingredient within a product." for this valueProduct strength basis, chemical
The functiongetCode()returns "ABP" for this value
The functiongetName()returns "Product strength basis, chemical" for this value
The functiongetDescription()returns "Amount of product used as the basis for the specification of the chemical product strenght." for this valueItem weight
The functiongetCode()returns "ABS" for this value
The functiongetName()returns "Item weight" for this value
The functiongetDescription()returns "Weight at line item level." for this valuePayload weight, maximum
The functiongetCode()returns "ABT" for this value
The functiongetName()returns "Payload weight, maximum" for this value
The functiongetDescription()returns "The maximum weight of a payload." for this valueWeight of conveyance
The functiongetCode()returns "ABX" for this value
The functiongetName()returns "Weight of conveyance" for this value
The functiongetDescription()returns "Tonnage of conveyance." for this valueConveyance summer dead weight
The functiongetCode()returns "ABY" for this value
The functiongetName()returns "Conveyance summer dead weight" for this value
The functiongetDescription()returns "Registered summer dead weight total tonnage of the vessel." for this valueContainerized cargo on vessel's weight
The functiongetCode()returns "ABZ" for this value
The functiongetName()returns "Containerized cargo on vessel's weight" for this value
The functiongetDescription()returns "Total weight of containerized cargo on vessel." for this valueNon-containerized cargo on vessel's weight
The functiongetCode()returns "ACA" for this value
The functiongetName()returns "Non-containerized cargo on vessel's weight" for this value
The functiongetDescription()returns "Total weight of non-containerized cargo on vessel." for this valueAscertained weight
The functiongetCode()returns "ACE" for this value
The functiongetName()returns "Ascertained weight" for this value
The functiongetDescription()returns "Endorsement of the true weight (mass) as ascertained or verified." for this valueChargeable weight
The functiongetCode()returns "ACG" for this value
The functiongetName()returns "Chargeable weight" for this value
The functiongetDescription()returns "The weight on which charges are based." for this valueEstimated gross weight
The functiongetCode()returns "ACN" for this value
The functiongetName()returns "Estimated gross weight" for this value
The functiongetDescription()returns "Estimated weight (mass) of goods, including packing and excluding carrier's." for this valueEstimated volume
The functiongetCode()returns "ACP" for this value
The functiongetName()returns "Estimated volume" for this value
The functiongetDescription()returns "Estimated size or measure of anything in three dimensions." for this valueVessel overall length
The functiongetCode()returns "ACS" for this value
The functiongetName()returns "Vessel overall length" for this value
The functiongetDescription()returns "Total overall length of the vessel." for this valueLoading meters
The functiongetCode()returns "ACV" for this value
The functiongetName()returns "Loading meters" for this value
The functiongetDescription()returns "The length in a vehicle, whereby the complete width and height over that length is needed for the goods." for this valueNumber of axles
The functiongetCode()returns "ACW" for this value
The functiongetName()returns "Number of axles" for this value
The functiongetDescription()returns "Number of axles of movable equipment or means of transport on wheels." for this valuePayload
The functiongetCode()returns "ACX" for this value
The functiongetName()returns "Payload" for this value
The functiongetDescription()returns "The revenue-producing load carried by a means of transport." for this valueStart position in the length
The functiongetCode()returns "ADR" for this value
The functiongetName()returns "Start position in the length" for this value
The functiongetDescription()returns "The starting position from the beginning of an item located in the length direction." for this valueEnd position in the length
The functiongetCode()returns "ADS" for this value
The functiongetName()returns "End position in the length" for this value
The functiongetDescription()returns "The end position from the beginning of an item located in the length direction." for this valueStart position in the width
The functiongetCode()returns "ADT" for this value
The functiongetName()returns "Start position in the width" for this value
The functiongetDescription()returns "The start position from the beginning of an item located in the width direction." for this valueEnd position in the width
The functiongetCode()returns "ADU" for this value
The functiongetName()returns "End position in the width" for this value
The functiongetDescription()returns "The end position from the beginning of an item located in the width direction." for this valueStart position in the thickness
The functiongetCode()returns "ADV" for this value
The functiongetName()returns "Start position in the thickness" for this value
The functiongetDescription()returns "The start position from the beginning of an item located in the thickness direction." for this valueEnd position in the thickness
The functiongetCode()returns "ADW" for this value
The functiongetName()returns "End position in the thickness" for this value
The functiongetDescription()returns "The end position from the beginning of an item located in the thickness direction." for this valueTransport container actual filling weight
The functiongetCode()returns "ADX" for this value
The functiongetName()returns "Transport container actual filling weight" for this value
The functiongetDescription()returns "Actual filling weight of a transport container." for this valueTransport container maximum capacity
The functiongetCode()returns "ADY" for this value
The functiongetName()returns "Transport container maximum capacity" for this value
The functiongetDescription()returns "Maximum capacity of a transport container." for this valueDeclared net weight
The functiongetCode()returns "ADZ" for this value
The functiongetName()returns "Declared net weight" for this value
The functiongetDescription()returns "The declared net weight of a product or products used for invoicing, customs or transport purposes." for this valueLoading height
The functiongetCode()returns "AEA" for this value
The functiongetName()returns "Loading height" for this value
The functiongetDescription()returns "Maximum height of products or packages loaded onto a given transportation device or equipment such as a pallet." for this valueStacking height
The functiongetCode()returns "AEB" for this value
The functiongetName()returns "Stacking height" for this value
The functiongetDescription()returns "Maximum height up to which the same product or package may be placed one upon the other for storage purposes." for this valueCalculated weight
The functiongetCode()returns "AEC" for this value
The functiongetName()returns "Calculated weight" for this value
The functiongetDescription()returns "The calculated weight of the item based on the ordered dimensions." for this valueFerrite
The functiongetCode()returns "AED" for this value
The functiongetName()returns "Ferrite" for this value
The functiongetDescription()returns "The chemical composition ferrite." for this valueImpurity
The functiongetCode()returns "AEE" for this value
The functiongetName()returns "Impurity" for this value
The functiongetDescription()returns "The impurity of the product i.e.Grain size
The functiongetCode()returns "AEF" for this value
The functiongetName()returns "Grain size" for this value
The functiongetDescription()returns "The grain size." for this valueLanthanides
The functiongetCode()returns "AEG" for this value
The functiongetName()returns "Lanthanides" for this value
The functiongetDescription()returns "The chemical element Lanthanides." for this valueElasticity
The functiongetCode()returns "AEH" for this value
The functiongetName()returns "Elasticity" for this value
The functiongetDescription()returns "The value of the elasticity." for this valueDrained weight
The functiongetCode()returns "AEI" for this value
The functiongetName()returns "Drained weight" for this value
The functiongetDescription()returns "The weight of a product when all liquids used in the packaging of the product have been removed." for this valueGallium
The functiongetCode()returns "AEJ" for this value
The functiongetName()returns "Gallium" for this value
The functiongetDescription()returns "Measurement of the gallium component." for this valueStrontium
The functiongetCode()returns "AEK" for this value
The functiongetName()returns "Strontium" for this value
The functiongetDescription()returns "Measurement of the strontium component." for this valueArea
The functiongetCode()returns "AEL" for this value
The functiongetName()returns "Area" for this value
The functiongetDescription()returns "Extent or measure of a surface." for this valueEquipment storage limitation
The functiongetCode()returns "AEM" for this value
The functiongetName()returns "Equipment storage limitation" for this value
The functiongetDescription()returns "Maximum storage limit of the equipment." for this valueRadioactive index of transport
The functiongetCode()returns "AEN" for this value
The functiongetName()returns "Radioactive index of transport" for this value
The functiongetDescription()returns "The index of transport determines the maximum radiation level at a distance of 1m from the external surface." for this valueRadioactivity
The functiongetCode()returns "AEO" for this value
The functiongetName()returns "Radioactivity" for this value
The functiongetDescription()returns "Activity of radioactive material." for this valueAverage gross weight
The functiongetCode()returns "AEP" for this value
The functiongetName()returns "Average gross weight" for this value
The functiongetDescription()returns "Weight which is the outcome of the division of the total gross weight by the number of units." for this valueForward draft
The functiongetCode()returns "AEQ" for this value
The functiongetName()returns "Forward draft" for this value
The functiongetDescription()returns "Depth of water from the surface of water to the bottom of the vessel measured at the draft mark of the bow." for this valueAfter draft
The functiongetCode()returns "AER" for this value
The functiongetName()returns "After draft" for this value
The functiongetDescription()returns "Depth of water from the surface of water to the bottom of the vessel measured at the draft mark of the stern." for this valueAcidity
The functiongetCode()returns "AES" for this value
The functiongetName()returns "Acidity" for this value
The functiongetDescription()returns "The quality, state, or degree of being acid." for this valueTransport equipment gross weight
The functiongetCode()returns "AET" for this value
The functiongetName()returns "Transport equipment gross weight" for this value
The functiongetDescription()returns "Weight of a transport equipment including the cargo and carrier's equipment." for this valueTotal transport equipment gross weight
The functiongetCode()returns "AEU" for this value
The functiongetName()returns "Total transport equipment gross weight" for this value
The functiongetDescription()returns "Total weight of all transport equipment including the cargo and carrier's equipment." for this valueAcidity of juice
The functiongetCode()returns "AEV" for this value
The functiongetName()returns "Acidity of juice" for this value
The functiongetDescription()returns "Acid measurement of juice." for this valuePenetrometry
The functiongetCode()returns "AEW" for this value
The functiongetName()returns "Penetrometry" for this value
The functiongetDescription()returns "Measurement of force required to drive a standard penetrating stamp." for this valueDurofel
The functiongetCode()returns "AEX" for this value
The functiongetName()returns "Durofel" for this value
The functiongetDescription()returns "Measurement of the elastic force using a standard penetrating stamp." for this valueJuice weight per 100 grams
The functiongetCode()returns "AEY" for this value
The functiongetName()returns "Juice weight per 100 grams" for this value
The functiongetDescription()returns "Measurement of weight of juice, based on 100 grams of the entire weight." for this valueFruit skin colour
The functiongetCode()returns "AEZ" for this value
The functiongetName()returns "Fruit skin colour" for this value
The functiongetDescription()returns "Measurement of the colouring of the epidermis of a fruit." for this valueAngle of bend
The functiongetCode()returns "AF" for this value
The functiongetName()returns "Angle of bend" for this value
The functiongetDescription()returns "The measured angle of bend." for this valueFixed incremental measurement
The functiongetCode()returns "AFA" for this value
The functiongetName()returns "Fixed incremental measurement" for this value
The functiongetDescription()returns "The measurement of the fixed increment." for this valueDurofel D10
The functiongetCode()returns "AFB" for this value
The functiongetName()returns "Durofel D10" for this value
The functiongetDescription()returns "Measure of the elastic force of the pulp of a fruit.Durofel D25
The functiongetCode()returns "AFC" for this value
The functiongetName()returns "Durofel D25" for this value
The functiongetDescription()returns "Measure of the elastic force of the pulp of a fruit.Durofel D50
The functiongetCode()returns "AFD" for this value
The functiongetName()returns "Durofel D50" for this value
The functiongetDescription()returns "Measure of the elastic force of the pulp of a fruit.Maximum stacking weight
The functiongetCode()returns "AFE" for this value
The functiongetName()returns "Maximum stacking weight" for this value
The functiongetDescription()returns "The maximum weight which may be stacked upon a product or package without the product or packaging being crushed." for this valueGross measure cube
The functiongetCode()returns "AFF" for this value
The functiongetName()returns "Gross measure cube" for this value
The functiongetDescription()returns "The total cubic space occupied by an item, taking into account any protruding components, arrived at by multiplying the maximum length, width and height." for this valuePercentage fat content in dry matter
The functiongetCode()returns "AFG" for this value
The functiongetName()returns "Percentage fat content in dry matter" for this value
The functiongetDescription()returns "The percentage of fat content in dry matter." for this valueSaccharometric content
The functiongetCode()returns "AFH" for this value
The functiongetName()returns "Saccharometric content" for this value
The functiongetDescription()returns "Measurement of the sugar content of a solution." for this valueHydrate content of an alcoholic product after bottling
The functiongetCode()returns "AFI" for this value
The functiongetName()returns "Hydrate content of an alcoholic product after bottling" for this value
The functiongetDescription()returns "The hydrate content which occurs in an alcoholic product after bottling." for this valueAnhydrous content
The functiongetCode()returns "AFJ" for this value
The functiongetName()returns "Anhydrous content" for this value
The functiongetDescription()returns "The non-water content." for this valueCertified weight
The functiongetCode()returns "AFK" for this value
The functiongetName()returns "Certified weight" for this value
The functiongetDescription()returns "Weight which has been certified." for this valueFreeboard
The functiongetCode()returns "AFL" for this value
The functiongetName()returns "Freeboard" for this value
The functiongetDescription()returns "The vertical distance between the waterline and the upper edge of the deck line." for this valueMaximum vessel draught
The functiongetCode()returns "AFM" for this value
The functiongetName()returns "Maximum vessel draught" for this value
The functiongetDescription()returns "The depth of water needed to float the ship (Maximum vessel draught according to Load Line Certificate IMO, MSC/Circ.Net explosive weight
The functiongetCode()returns "AFN" for this value
The functiongetName()returns "Net explosive weight" for this value
The functiongetDescription()returns "Mass of the explosive part or substance of goods without any packing." for this valueRadioactive criticality safety index
The functiongetCode()returns "AFO" for this value
The functiongetName()returns "Radioactive criticality safety index" for this value
The functiongetDescription()returns "A number, assigned to fissile material i.e.Waste currently on board
The functiongetCode()returns "AFP" for this value
The functiongetName()returns "Waste currently on board" for this value
The functiongetDescription()returns "Amount of waste on board at the moment of the notification." for this valueWaste to be delivered at waste reception facility
The functiongetCode()returns "AFQ" for this value
The functiongetName()returns "Waste to be delivered at waste reception facility" for this value
The functiongetDescription()returns "Amount of waste to be delivered to a waste reception facility, e.g.Waste to be generated until next port of call, estimated
The functiongetCode()returns "AFR" for this value
The functiongetName()returns "Waste to be generated until next port of call, estimated" for this value
The functiongetDescription()returns "Estimated amount of waste to be generated between creation of the current notification and arrival in the next port of call, irrespective of use of incinerator or compactor or disposal at sea." for this valueWaste remaining on board at departure
The functiongetCode()returns "AFS" for this value
The functiongetName()returns "Waste remaining on board at departure" for this value
The functiongetDescription()returns "Amount of waste remaining on board when leaving the port of call." for this valueColour depth
The functiongetCode()returns "AFT" for this value
The functiongetName()returns "Colour depth" for this value
The functiongetDescription()returns "The number of distinct colours represented, e.g.Colour depth, maximum
The functiongetCode()returns "AFU" for this value
The functiongetName()returns "Colour depth, maximum" for this value
The functiongetDescription()returns "The maximum number of distinct colours that can be represented, e.g.Image resolution
The functiongetCode()returns "AFV" for this value
The functiongetName()returns "Image resolution" for this value
The functiongetDescription()returns "The level of detail of an image." for this valueDevice resolution, maximum
The functiongetCode()returns "AFW" for this value
The functiongetName()returns "Device resolution, maximum" for this value
The functiongetDescription()returns "The maximum level of detail produced by a device." for this valueAcoustic absorption coefficient
The functiongetCode()returns "AFX" for this value
The functiongetName()returns "Acoustic absorption coefficient" for this value
The functiongetDescription()returns "The portion of sound energy a surface absorbs, measured at different frequencies." for this valueBilled weight
The functiongetCode()returns "B" for this value
The functiongetName()returns "Billed weight" for this value
The functiongetDescription()returns "The measured billed weight." for this valueBest before date
The functiongetCode()returns "BEST_BEFORE_DATE" for this value
The functiongetName()returns "Best before date" for this value
The functiongetDescription()returns "" for this valueBreaking load
The functiongetCode()returns "BL" for this value
The functiongetName()returns "Breaking load" for this value
The functiongetDescription()returns "The measured breaking load." for this valuePlatinum
The functiongetCode()returns "BMY" for this value
The functiongetName()returns "Platinum" for this value
The functiongetDescription()returns "The measurement of the platinum component." for this valueSilver
The functiongetCode()returns "BMZ" for this value
The functiongetName()returns "Silver" for this value
The functiongetDescription()returns "The measurement of the silver component." for this valueList
The functiongetCode()returns "BNA" for this value
The functiongetName()returns "List" for this value
The functiongetDescription()returns "The leaning or inclination of a vessel expressed in degrees port or starboard." for this valueTrim
The functiongetCode()returns "BNB" for this value
The functiongetName()returns "Trim" for this value
The functiongetDescription()returns "The condition of a vessel with reference to its longitudinal axis." for this valueFree water
The functiongetCode()returns "BNC" for this value
The functiongetName()returns "Free water" for this value
The functiongetDescription()returns "The volume of water present in a container that is not in suspension in the contained liquid." for this valueBands
The functiongetCode()returns "BND" for this value
The functiongetName()returns "Bands" for this value
The functiongetDescription()returns "The measured bands." for this valueAPI (American Petroleum Institute) gravity
The functiongetCode()returns "BNE" for this value
The functiongetName()returns "API (American Petroleum Institute) gravity" for this value
The functiongetDescription()returns "The relative density of petroleum liquids as specified by a standard developed by the API." for this valuePetroleum gross observed volume
The functiongetCode()returns "BNF" for this value
The functiongetName()returns "Petroleum gross observed volume" for this value
The functiongetDescription()returns "The total volume of all petroleum liquids and sediment and water, excluding free water, at observed temperature and pressure." for this valuePetroleum gross standard volume
The functiongetCode()returns "BNG" for this value
The functiongetName()returns "Petroleum gross standard volume" for this value
The functiongetDescription()returns "The total volume of all petroleum liquids, sediment, and water excluding free water, corrected by the appropriate volume correction factor for the observed temperature and American Petroleum Institute relative density, or density to a standard temperature." for this valueVolume variance
The functiongetCode()returns "BNH" for this value
The functiongetName()returns "Volume variance" for this value
The functiongetDescription()returns "The change in the volume measurement." for this valuePetroleum net standard volume
The functiongetCode()returns "BNI" for this value
The functiongetName()returns "Petroleum net standard volume" for this value
The functiongetDescription()returns "The total volume of all petroleum liquids, excluding sediment and water and free water, corrected by the appropriate volume correction factor for the observed temperature and American Petroleum Institute gravity relative to density or to a standard temperature." for this valueMaterial on-board quantity, after discharge
The functiongetCode()returns "BNJ" for this value
The functiongetName()returns "Material on-board quantity, after discharge" for this value
The functiongetDescription()returns "The material in vessel tanks, void spaces, and pipelines after discharge." for this valuePetroleum total calculated volume
The functiongetCode()returns "BNK" for this value
The functiongetName()returns "Petroleum total calculated volume" for this value
The functiongetDescription()returns "The total volume of all petroleum liquids, sediment and water corrected by the appropriate volume correction factor for the observed temperature and American Petroleum Institute (API) gravity, relative density, or density to a standard temperature." for this valuePetroleum total observed volume
The functiongetCode()returns "BNL" for this value
The functiongetName()returns "Petroleum total observed volume" for this value
The functiongetDescription()returns "The total volume of all petroleum liquids, sediment and water and free water at observed temperature and pressure." for this valueInnage gauge distance
The functiongetCode()returns "BNM" for this value
The functiongetName()returns "Innage gauge distance" for this value
The functiongetDescription()returns "The measured distance from the surface of the liquid to a fixed datum plate or to the tank bottom." for this valuePetroleum net standard weight
The functiongetCode()returns "BNN" for this value
The functiongetName()returns "Petroleum net standard weight" for this value
The functiongetDescription()returns "The total weight of all petroleum liquids excluding sediments, water and free water." for this valueSediment and water in petroleum
The functiongetCode()returns "BNO" for this value
The functiongetName()returns "Sediment and water in petroleum" for this value
The functiongetDescription()returns "The measurement of non-hydrocarbon solid material and water in suspension in petroleum liquid." for this valueObserved reference height, tank
The functiongetCode()returns "BNP" for this value
The functiongetName()returns "Observed reference height, tank" for this value
The functiongetDescription()returns "The observed distance from the tank bottom or datum plate to the established reference point." for this valueReference height, tank
The functiongetCode()returns "BNQ" for this value
The functiongetName()returns "Reference height, tank" for this value
The functiongetDescription()returns "The measured distance from the tank bottom or datum plate to the established reference point." for this valueUllage gauge distance
The functiongetCode()returns "BNR" for this value
The functiongetName()returns "Ullage gauge distance" for this value
The functiongetDescription()returns "The measured distance from the cargo liquid surface to the reference point." for this valueTrim correction
The functiongetCode()returns "BNS" for this value
The functiongetName()returns "Trim correction" for this value
The functiongetDescription()returns "The correction applied to the observed gauge or observed volume when a vessel is not on an even keel." for this valueBow to bridge distance
The functiongetCode()returns "BNT" for this value
The functiongetName()returns "Bow to bridge distance" for this value
The functiongetDescription()returns "The distance between the bow and the bridge of a vessel." for this valuePeg hole number
The functiongetCode()returns "BNU" for this value
The functiongetName()returns "Peg hole number" for this value
The functiongetDescription()returns "Used to identify the peg hole if more than one hole is present in the product or packaging." for this valueNumber of inner packs
The functiongetCode()returns "BNV" for this value
The functiongetName()returns "Number of inner packs" for this value
The functiongetDescription()returns "Indicates the number of non coded physical groupings (inner packs) of next lower level trade items within the current trade item level." for this valueNumber of next level trade items within inner pack
The functiongetCode()returns "BNW" for this value
The functiongetName()returns "Number of next level trade items within inner pack" for this value
The functiongetDescription()returns "The number of next lower level trade items contained within the physical non-coded grouping (inner pack)." for this valueNumber of trade items per pallet layer
The functiongetCode()returns "BNX" for this value
The functiongetName()returns "Number of trade items per pallet layer" for this value
The functiongetDescription()returns "The number of trade items contained on a single layer of a pallet." for this valuePacked items layer height
The functiongetCode()returns "BNY" for this value
The functiongetName()returns "Packed items layer height" for this value
The functiongetDescription()returns "The height of a single layer of packed items." for this valuePacking material weight, skin tight covering
The functiongetCode()returns "BNZ" for this value
The functiongetName()returns "Packing material weight, skin tight covering" for this value
The functiongetDescription()returns "The weight measurement of the packing material used for skin tight covering (e.g.Brightness
The functiongetCode()returns "BR" for this value
The functiongetName()returns "Brightness" for this value
The functiongetDescription()returns "The measured brightness." for this valueBrakes
The functiongetCode()returns "BRA" for this value
The functiongetName()returns "Brakes" for this value
The functiongetDescription()returns "The measured brakes." for this valueComponents labelled for recycling percentage
The functiongetCode()returns "BRB" for this value
The functiongetName()returns "Components labelled for recycling percentage" for this value
The functiongetDescription()returns "Percentage of trade item components that clearly label how to facilitate product disassembly and recycling." for this valueRenewable plastic components percentage, by net weight
The functiongetCode()returns "BRC" for this value
The functiongetName()returns "Renewable plastic components percentage, by net weight" for this value
The functiongetDescription()returns "The percentage of the plastic components only made from rapidly renewable plant-based material by net weight of product." for this valueClamp pressure, required
The functiongetCode()returns "BRD" for this value
The functiongetName()returns "Clamp pressure, required" for this value
The functiongetDescription()returns "The pressure that should be applied by a clamp." for this valueBreak
The functiongetCode()returns "BRE" for this value
The functiongetName()returns "Break" for this value
The functiongetDescription()returns "The measured break." for this valueAscertained volume
The functiongetCode()returns "BRF" for this value
The functiongetName()returns "Ascertained volume" for this value
The functiongetDescription()returns "Endorsement of the true volume as ascertained or verified." for this valueUnit weight
The functiongetCode()returns "BRG" for this value
The functiongetName()returns "Unit weight" for this value
The functiongetDescription()returns "The weight of a unit." for this valueTotal volume
The functiongetCode()returns "BRH" for this value
The functiongetName()returns "Total volume" for this value
The functiongetDescription()returns "Total volume of goods and/or parcels." for this valueUnit volume
The functiongetCode()returns "BRI" for this value
The functiongetName()returns "Unit volume" for this value
The functiongetDescription()returns "The volume of a unit." for this valueVertical center of gravity
The functiongetCode()returns "BRJ" for this value
The functiongetName()returns "Vertical center of gravity" for this value
The functiongetDescription()returns "Distance of vertical center of gravity relative to item's base." for this valueMaximum allowable transport stacking weight
The functiongetCode()returns "BRK" for this value
The functiongetName()returns "Maximum allowable transport stacking weight" for this value
The functiongetDescription()returns "Maximum weight allowed to be stowed on top of an item during transport." for this valueCarbon Dioxide
The functiongetCode()returns "BRL" for this value
The functiongetName()returns "Carbon Dioxide" for this value
The functiongetDescription()returns "Measurement of the carbon dioxide (C02) component." for this valueNumber of base units per pallet
The functiongetCode()returns "BRM" for this value
The functiongetName()returns "Number of base units per pallet" for this value
The functiongetDescription()returns "The number of base units contained on a pallet." for this valueColony forming unit
The functiongetCode()returns "BRN" for this value
The functiongetName()returns "Colony forming unit" for this value
The functiongetDescription()returns "Micro-organism colonies that are to be counted under determined conditions." for this valueDiluted liquid volume
The functiongetCode()returns "BRO" for this value
The functiongetName()returns "Diluted liquid volume" for this value
The functiongetDescription()returns "The volume of liquid which results after a dilution agent has been added, e.g.Energy efficiency
The functiongetCode()returns "BRP" for this value
The functiongetName()returns "Energy efficiency" for this value
The functiongetDescription()returns "A measurement of the energy efficiency of an article." for this valueNumber of layers
The functiongetCode()returns "BRQ" for this value
The functiongetName()returns "Number of layers" for this value
The functiongetDescription()returns "Number of layers of a product or products within a package, container, etc." for this valueMaximum demand
The functiongetCode()returns "BRR" for this value
The functiongetName()returns "Maximum demand" for this value
The functiongetDescription()returns "The highest demand recorded during the period of recording of usage of the supply." for this valueNumber of pallet places
The functiongetCode()returns "BRS" for this value
The functiongetName()returns "Number of pallet places" for this value
The functiongetDescription()returns "The number of pallet places needed to store or to transport pallets (can be stacked)." for this valuePackage net measurement, cubed
The functiongetCode()returns "BRT" for this value
The functiongetName()returns "Package net measurement, cubed" for this value
The functiongetDescription()returns "An indication of the net cubed measurement of a package." for this valuePower factor
The functiongetCode()returns "BRU" for this value
The functiongetName()returns "Power factor" for this value
The functiongetDescription()returns "The ratio of the power dissipated (active power in kW) to the total power (which is the product of the input volts times amps given in kVa).Stacking factor excluding bottom item
The functiongetCode()returns "BRV" for this value
The functiongetName()returns "Stacking factor excluding bottom item" for this value
The functiongetDescription()returns "Maximum number of identical items stackable on top of item." for this valueBreaking strength
The functiongetCode()returns "BS" for this value
The functiongetName()returns "Breaking strength" for this value
The functiongetDescription()returns "The measured breaking strength." for this valueBreaking strength wet
The functiongetCode()returns "BSW" for this value
The functiongetName()returns "Breaking strength wet" for this value
The functiongetDescription()returns "The measured breaking strength when wet." for this valueStep size
The functiongetCode()returns "BSX" for this value
The functiongetName()returns "Step size" for this value
The functiongetDescription()returns "An indication of measurements in which options contained within a Customer Specific Article are available, e.g.Number of units per package
The functiongetCode()returns "BSY" for this value
The functiongetName()returns "Number of units per package" for this value
The functiongetDescription()returns "The number of identified units per package." for this valueNumber of units per layer
The functiongetCode()returns "BSZ" for this value
The functiongetName()returns "Number of units per layer" for this value
The functiongetDescription()returns "Number of units of a product or package within one layer of a package, container, etc." for this valueWeight per running metre
The functiongetCode()returns "BTA" for this value
The functiongetName()returns "Weight per running metre" for this value
The functiongetDescription()returns "A code used to indicate the weight per running metre of floor coverings over floor area." for this valueWeight per square metre
The functiongetCode()returns "BTB" for this value
The functiongetName()returns "Weight per square metre" for this value
The functiongetDescription()returns "A code used to indicate the weight per square metre of floor coverings over floor area." for this valueAcidity of meat
The functiongetCode()returns "BTC" for this value
The functiongetName()returns "Acidity of meat" for this value
The functiongetDescription()returns "The meat's acid quality or condition." for this valueSlaughtering weight
The functiongetCode()returns "BTD" for this value
The functiongetName()returns "Slaughtering weight" for this value
The functiongetDescription()returns "Weight immediately after slaughter." for this valueStacking factor including bottom item
The functiongetCode()returns "BTE" for this value
The functiongetName()returns "Stacking factor including bottom item" for this value
The functiongetDescription()returns "Maximum number of items stackable upon each other, including the bottom item." for this valueNumber of units in the width of a layer
The functiongetCode()returns "BTF" for this value
The functiongetName()returns "Number of units in the width of a layer" for this value
The functiongetDescription()returns "Number of units of a product or package which make up the width of a layer in a package, container, pallet, etc." for this valueNumber of units in the depth of a layer
The functiongetCode()returns "BTG" for this value
The functiongetName()returns "Number of units in the depth of a layer" for this value
The functiongetDescription()returns "Number of units of a product or package which make up the depth of a layer in a package, container, pallet, etc." for this valueNestable percentage
The functiongetCode()returns "BTH" for this value
The functiongetName()returns "Nestable percentage" for this value
The functiongetDescription()returns "Extent expressed as a percentage to which an item can be nested within an identical item, e.g.Gross weight including carrier's equipment
The functiongetCode()returns "BTI" for this value
The functiongetName()returns "Gross weight including carrier's equipment" for this value
The functiongetDescription()returns "Weight (mass) of goods including packaging and the carrier's equipment.Sugar content
The functiongetCode()returns "BTJ" for this value
The functiongetName()returns "Sugar content" for this value
The functiongetDescription()returns "The rate of sugar." for this valueSelf-accelerating polymerization temperature (SAPT)
The functiongetCode()returns "BTK" for this value
The functiongetName()returns "Self-accelerating polymerization temperature (SAPT)" for this value
The functiongetDescription()returns "The lowest temperature at which polymerization may occur for a substance as packed for transport." for this valueSelf-accelerating decomposition temperature (SADT)
The functiongetCode()returns "BTL" for this value
The functiongetName()returns "Self-accelerating decomposition temperature (SADT)" for this value
The functiongetDescription()returns "The lowest temperature at which self-accelerating decomposition may occur for a substance as packed for transport." for this valueControl temperature
The functiongetCode()returns "BTM" for this value
The functiongetName()returns "Control temperature" for this value
The functiongetDescription()returns "The controlled transport temperature to avoid decomposition of self-reactive substances and organic peroxides." for this valueBasis weight
The functiongetCode()returns "BW" for this value
The functiongetName()returns "Basis weight" for this value
The functiongetDescription()returns "The measured basis weight." for this valueChange
The functiongetCode()returns "CHN" for this value
The functiongetName()returns "Change" for this value
The functiongetDescription()returns "The measured change." for this valueEmergency temperature
The functiongetCode()returns "CHO" for this value
The functiongetName()returns "Emergency temperature" for this value
The functiongetDescription()returns "The temperature at which emergency response is required for self-reactive substances and organic peroxides." for this valueColour
The functiongetCode()returns "CM" for this value
The functiongetName()returns "Colour" for this value
The functiongetDescription()returns "The measured colour." for this valueColour as text
The functiongetCode()returns "COLOR_TEXT" for this value
The functiongetName()returns "Colour as text" for this value
The functiongetDescription()returns "" for this valueCommission indicator
The functiongetCode()returns "COMMISSION" for this value
The functiongetName()returns "Commission indicator" for this value
The functiongetDescription()returns "true / false" for this valueContents of package
The functiongetCode()returns "CT" for this value
The functiongetName()returns "Contents of package" for this value
The functiongetDescription()returns "In combination with the other data elements of the actual segment this code indicates the measured content of a package." for this valueCustom entry whose member "code" gets updated to "value" on calls tofromString(String value)Custom entry whose member "code" gets updated to "value" on calls tofromString(String value)Custom entry whose member "code" gets updated to "value" on calls tofromString(String value)Custom entry whose member "code" gets updated to "value" on calls tofromString(String value)Custom entry whose member "code" gets updated to "value" on calls tofromString(String value)Custom entry whose member "code" gets updated to "value" on calls tofromString(String value)Custom entry whose member "code" gets updated to "value" on calls tofromString(String value)Custom entry whose member "code" gets updated to "value" on calls tofromString(String value)Custom entry whose member "code" gets updated to "value" on calls tofromString(String value)Custom entry whose member "code" gets updated to "value" on calls tofromString(String value)Commercial weight
The functiongetCode()returns "CV" for this value
The functiongetName()returns "Commercial weight" for this value
The functiongetDescription()returns "Item weight considering its maximum possible humidity." for this valueCore length
The functiongetCode()returns "CZ" for this value
The functiongetName()returns "Core length" for this value
The functiongetDescription()returns "To specify length of core on which product is to be placed." for this valueDestination weight agreement
The functiongetCode()returns "D" for this value
The functiongetName()returns "Destination weight agreement" for this value
The functiongetDescription()returns "The agreed weight of despatched goods whose weight may change during transport." for this valueDeposit system
The functiongetCode()returns "DEPOSIT_SYSTEM" for this value
The functiongetName()returns "Deposit system" for this value
The functiongetDescription()returns "Permitted values: DISPOSABLE RETURNABLE" for this valueDeposit type
The functiongetCode()returns "DEPOSIT_TYPE" for this value
The functiongetName()returns "Deposit type" for this value
The functiongetDescription()returns "Permitted values: PRODUCT_PACKAGING TRANSPORT_EQUIPMENT" for this valueDiameter
The functiongetCode()returns "DI" for this value
The functiongetName()returns "Diameter" for this value
The functiongetDescription()returns "Diameter of an article." for this valueDelta value L
The functiongetCode()returns "DL" for this value
The functiongetName()returns "Delta value L" for this value
The functiongetDescription()returns "The measured delta value L." for this valueDensity
The functiongetCode()returns "DN" for this value
The functiongetName()returns "Density" for this value
The functiongetDescription()returns "The measured density." for this valueDepth
The functiongetCode()returns "DP" for this value
The functiongetName()returns "Depth" for this value
The functiongetDescription()returns "The measured depth." for this valueDenier
The functiongetCode()returns "DR" for this value
The functiongetName()returns "Denier" for this value
The functiongetDescription()returns "The measured fineness of a material." for this valueDistance between points
The functiongetCode()returns "DS" for this value
The functiongetName()returns "Distance between points" for this value
The functiongetDescription()returns "The measured distance between points." for this valueWidth, boxcar door
The functiongetCode()returns "DW" for this value
The functiongetName()returns "Width, boxcar door" for this value
The functiongetDescription()returns "The measured width of a boxcar door." for this valueEstimated new weight
The functiongetCode()returns "E" for this value
The functiongetName()returns "Estimated new weight" for this value
The functiongetDescription()returns "The measured estimated new weight." for this valueElongation
The functiongetCode()returns "EA" for this value
The functiongetName()returns "Elongation" for this value
The functiongetDescription()returns "The measured elongation." for this valueEnergy efficiency class
The functiongetCode()returns "ENERGY_CLASS" for this value
The functiongetName()returns "Energy efficiency class" for this value
The functiongetDescription()returns "" for this valueExpiration date
The functiongetCode()returns "EXPIRATION_DATE" for this value
The functiongetName()returns "Expiration date" for this value
The functiongetDescription()returns "" for this valueDeficit weight
The functiongetCode()returns "F" for this value
The functiongetName()returns "Deficit weight" for this value
The functiongetDescription()returns "The measured deficit weight." for this valueFee indicator
The functiongetCode()returns "FEE" for this value
The functiongetName()returns "Fee indicator" for this value
The functiongetDescription()returns "true = item is a fee" for this valueFilament count
The functiongetCode()returns "FI" for this value
The functiongetName()returns "Filament count" for this value
The functiongetDescription()returns "Used e.g.Longitudinal flatness
The functiongetCode()returns "FL" for this value
The functiongetName()returns "Longitudinal flatness" for this value
The functiongetDescription()returns "The measured longitudinal flatness." for this valueFlatness
The functiongetCode()returns "FN" for this value
The functiongetName()returns "Flatness" for this value
The functiongetDescription()returns "The measured flatness." for this valueTransverse flatness
The functiongetCode()returns "FV" for this value
The functiongetName()returns "Transverse flatness" for this value
The functiongetDescription()returns "The measured transverse flatness." for this valueGauge
The functiongetCode()returns "GG" for this value
The functiongetName()returns "Gauge" for this value
The functiongetDescription()returns "The measured gauge." for this valueGross weight, maximum
The functiongetCode()returns "GW" for this value
The functiongetName()returns "Gross weight, maximum" for this value
The functiongetDescription()returns "The measured maximum gross weight." for this valueHardness
The functiongetCode()returns "HF" for this value
The functiongetName()returns "Hardness" for this value
The functiongetDescription()returns "The measured hardness." for this valueHeight, maximum
The functiongetCode()returns "HM" for this value
The functiongetName()returns "Height, maximum" for this value
The functiongetDescription()returns "The measured maximum height." for this valueHeight dimension
The functiongetCode()returns "HT" for this value
The functiongetName()returns "Height dimension" for this value
The functiongetDescription()returns "Numeric value of height." for this valueImpact energy
The functiongetCode()returns "IB" for this value
The functiongetName()returns "Impact energy" for this value
The functiongetDescription()returns "The measured impact energy." for this valueInside diameter
The functiongetCode()returns "ID" for this value
The functiongetName()returns "Inside diameter" for this value
The functiongetDescription()returns "The measured inside diameter." for this valueType of article
The functiongetCode()returns "KIND_OF_ARTICLE" for this value
The functiongetName()returns "Type of article" for this value
The functiongetDescription()returns "Allowed values: GOODS OTHER_SERVICES" for this valueLegal weight
The functiongetCode()returns "L" for this value
The functiongetName()returns "Legal weight" for this value
The functiongetDescription()returns "The measured legal weight." for this valueLength, maximum
The functiongetCode()returns "LM" for this value
The functiongetName()returns "Length, maximum" for this value
The functiongetDescription()returns "The measured maximum length." for this valueLength
The functiongetCode()returns "LN" for this value
The functiongetName()returns "Length" for this value
The functiongetDescription()returns "To specify the value of a length dimension." for this valueLost end
The functiongetCode()returns "LND" for this value
The functiongetName()returns "Lost end" for this value
The functiongetDescription()returns "The measured lost end." for this valueMinimum weight
The functiongetCode()returns "M" for this value
The functiongetName()returns "Minimum weight" for this value
The functiongetDescription()returns "The measured minimum weight." for this valueMaterial of the product
The functiongetCode()returns "MATERIAL" for this value
The functiongetName()returns "Material of the product" for this value
The functiongetDescription()returns "" for this valueMetering point designation, e.g.Meter number, e.g.Moisture
The functiongetCode()returns "MO" for this value
The functiongetName()returns "Moisture" for this value
The functiongetDescription()returns "Measurement application is the moisture content of the item." for this valueMaximum weight
The functiongetCode()returns "MW" for this value
The functiongetName()returns "Maximum weight" for this value
The functiongetDescription()returns "The measured maximum weight." for this valueActual net weight
The functiongetCode()returns "N" for this value
The functiongetName()returns "Actual net weight" for this value
The functiongetDescription()returns "The actual weight of the goods excluding packaging." for this valueOutside diameter
The functiongetCode()returns "OD" for this value
The functiongetName()returns "Outside diameter" for this value
The functiongetDescription()returns "The measured outside diameter." for this valueOrganic control body number
The functiongetCode()returns "ORGANIC_CONTROL_BODY" for this value
The functiongetName()returns "Organic control body number" for this value
The functiongetDescription()returns "" for this valuePackaging material
The functiongetCode()returns "PACKAGING_MATERIAL" for this value
The functiongetName()returns "Packaging material" for this value
The functiongetDescription()returns "" for this valueType of packaging (code)
The functiongetCode()returns "PACKAGING_TYPE" for this value
The functiongetName()returns "Type of packaging (code)" for this value
The functiongetDescription()returns "Type of packaging in coded form.Number of the action variant
The functiongetCode()returns "PROMOTIONAL_VARIANT" for this value
The functiongetName()returns "Number of the action variant" for this value
The functiongetDescription()returns "" for this valuePre stretch
The functiongetCode()returns "PRS" for this value
The functiongetName()returns "Pre stretch" for this value
The functiongetDescription()returns "Measurement identifying the amount an item has been stretched prior to use." for this valuePer tonne
The functiongetCode()returns "PTN" for this value
The functiongetName()returns "Per tonne" for this value
The functiongetDescription()returns "A measurement per tonne." for this valueRelative humidity
The functiongetCode()returns "RA" for this value
The functiongetName()returns "Relative humidity" for this value
The functiongetDescription()returns "The measured relative humidity." for this valueResistivity
The functiongetCode()returns "RF" for this value
The functiongetName()returns "Resistivity" for this value
The functiongetDescription()returns "The measured resistivity." for this valueRockwell C
The functiongetCode()returns "RJ" for this value
The functiongetName()returns "Rockwell C" for this value
The functiongetDescription()returns "Hardness in the Rockwell C scale." for this valueReam weight
The functiongetCode()returns "RMW" for this value
The functiongetName()returns "Ream weight" for this value
The functiongetDescription()returns "Measurement indication for paper." for this valueReduction of area
The functiongetCode()returns "RP" for this value
The functiongetName()returns "Reduction of area" for this value
The functiongetDescription()returns "The measured reduction of area." for this valueRun (process)
The functiongetCode()returns "RUN" for this value
The functiongetName()returns "Run (process)" for this value
The functiongetDescription()returns "The measured run (process)." for this valueRatio
The functiongetCode()returns "RY" for this value
The functiongetName()returns "Ratio" for this value
The functiongetDescription()returns "The measured ratio." for this valueSeal number
The functiongetCode()returns "SEAL_NUMBER" for this value
The functiongetName()returns "Seal number" for this value
The functiongetDescription()returns "" for this valueSize code
The functiongetCode()returns "SIZE_CODE" for this value
The functiongetName()returns "Size code" for this value
The functiongetDescription()returns "Size information in coded form" for this valueSize designation
The functiongetCode()returns "SIZE_TEXT" for this value
The functiongetName()returns "Size designation" for this value
The functiongetDescription()returns "Size specifications in text form" for this valueShipped quantity
The functiongetCode()returns "SQ" for this value
The functiongetName()returns "Shipped quantity" for this value
The functiongetDescription()returns "The measured shipped quantity." for this valueTare weight
The functiongetCode()returns "T" for this value
The functiongetName()returns "Tare weight" for this value
The functiongetDescription()returns "Weight excluding goods and loose accessories." for this valueTemperature
The functiongetCode()returns "TC" for this value
The functiongetName()returns "Temperature" for this value
The functiongetDescription()returns "A measurement in relation to temperature." for this valueThickness
The functiongetCode()returns "TH" for this value
The functiongetName()returns "Thickness" for this value
The functiongetDescription()returns "The measured thickness." for this valueTime period
The functiongetCode()returns "TN" for this value
The functiongetName()returns "Time period" for this value
The functiongetDescription()returns "Measurement of a specific length of time." for this valueType of trading unit
The functiongetCode()returns "TRADING_UNIT" for this value
The functiongetName()returns "Type of trading unit" for this value
The functiongetDescription()returns "Permitted values: MIXED_ASSORTMENT = Assortment UNMIXED_UNIT = Container" for this valueTime
The functiongetCode()returns "TT" for this value
The functiongetName()returns "Time" for this value
The functiongetDescription()returns "The measured time." for this valueTransport equipment verified gross mass (weight)
The functiongetCode()returns "VGM" for this value
The functiongetName()returns "Transport equipment verified gross mass (weight)" for this value
The functiongetDescription()returns "The gross mass (weight) of the transport equipment verified according to SOLAS Chapter VI, Regulation 2, paragraphs 4-6." for this valueHeight, van door
The functiongetCode()returns "VH" for this value
The functiongetName()returns "Height, van door" for this value
The functiongetDescription()returns "The height of the door of a van or container." for this valueWidth, van door
The functiongetCode()returns "VW" for this value
The functiongetName()returns "Width, van door" for this value
The functiongetDescription()returns "The width of the door of a van or container." for this valueWeight per unit of area
The functiongetCode()returns "WA" for this value
The functiongetName()returns "Weight per unit of area" for this value
The functiongetDescription()returns "The weight per unit of an area." for this valueWaste code (EWC)
The functiongetCode()returns "WASTE_CODE" for this value
The functiongetName()returns "Waste code (EWC)" for this value
The functiongetDescription()returns "Waste code according to the European Waste Catalogue (EWC)" for this valueWaste fraction
The functiongetCode()returns "WASTE_FRACTION" for this value
The functiongetName()returns "Waste fraction" for this value
The functiongetDescription()returns "" for this valueWidth dimension
The functiongetCode()returns "WD" for this value
The functiongetName()returns "Width dimension" for this value
The functiongetDescription()returns "Numeric value of width." for this valueWEEE registration number
The functiongetCode()returns "WEEE_NUMBER" for this value
The functiongetName()returns "WEEE registration number" for this value
The functiongetDescription()returns "WEEE registration number of the manufacturer of the product" for this valueWidth, maximum
The functiongetCode()returns "WM" for this value
The functiongetName()returns "Width, maximum" for this value
The functiongetDescription()returns "The maximum distance from side to side." for this valueWeight per unit of length
The functiongetCode()returns "WU" for this value
The functiongetName()returns "Weight per unit of length" for this value
The functiongetDescription()returns "The weight per unit of length." for this valueSide height, flat bed with removable sides
The functiongetCode()returns "XH" for this value
The functiongetName()returns "Side height, flat bed with removable sides" for this value
The functiongetDescription()returns "The height of the removable sides of a flat bed truck." for this valueSquareness
The functiongetCode()returns "XQ" for this value
The functiongetName()returns "Squareness" for this value
The functiongetDescription()returns "The measured squareness." for this valueSpool size
The functiongetCode()returns "XZ" for this value
The functiongetName()returns "Spool size" for this value
The functiongetDescription()returns "The measured spool size." for this valueYield stress
The functiongetCode()returns "YS" for this value
The functiongetName()returns "Yield stress" for this value
The functiongetDescription()returns "The measured yield stress." for this valueAluminium
The functiongetCode()returns "ZAL" for this value
The functiongetName()returns "Aluminium" for this value
The functiongetDescription()returns "The measured chemical element aluminium." for this valueArsenic
The functiongetCode()returns "ZAS" for this value
The functiongetName()returns "Arsenic" for this value
The functiongetDescription()returns "The measured chemical element arsenic." for this valueBoron
The functiongetCode()returns "ZB" for this value
The functiongetName()returns "Boron" for this value
The functiongetDescription()returns "The measured chemical element boron." for this valueBismuth
The functiongetCode()returns "ZBI" for this value
The functiongetName()returns "Bismuth" for this value
The functiongetDescription()returns "The measured chemical element bismuth." for this valueCarbon
The functiongetCode()returns "ZC" for this value
The functiongetName()returns "Carbon" for this value
The functiongetDescription()returns "The measured chemical element carbon." for this valueCalcium
The functiongetCode()returns "ZCA" for this value
The functiongetName()returns "Calcium" for this value
The functiongetDescription()returns "The measured chemical element calcium." for this valueColumbium
The functiongetCode()returns "ZCB" for this value
The functiongetName()returns "Columbium" for this value
The functiongetDescription()returns "The measured chemical element columbium." for this valueCerium
The functiongetCode()returns "ZCE" for this value
The functiongetName()returns "Cerium" for this value
The functiongetDescription()returns "The measured chemical element cerium." for this valueChlorine
The functiongetCode()returns "ZCL" for this value
The functiongetName()returns "Chlorine" for this value
The functiongetDescription()returns "The measured chemical element chlorine." for this valueCobalt
The functiongetCode()returns "ZCO" for this value
The functiongetName()returns "Cobalt" for this value
The functiongetDescription()returns "The measured chemical element cobalt." for this valueChromium
The functiongetCode()returns "ZCR" for this value
The functiongetName()returns "Chromium" for this value
The functiongetDescription()returns "The measured chemical element chromium." for this valueCopper
The functiongetCode()returns "ZCU" for this value
The functiongetName()returns "Copper" for this value
The functiongetDescription()returns "The measured chemical element copper." for this valueIron
The functiongetCode()returns "ZFE" for this value
The functiongetName()returns "Iron" for this value
The functiongetDescription()returns "The measured chemical element iron." for this valueIron plus silicon
The functiongetCode()returns "ZFS" for this value
The functiongetName()returns "Iron plus silicon" for this value
The functiongetDescription()returns "The measured substance iron plus silicon." for this valueGermanium
The functiongetCode()returns "ZGE" for this value
The functiongetName()returns "Germanium" for this value
The functiongetDescription()returns "The measured chemical element germanium." for this valueHydrogen
The functiongetCode()returns "ZH" for this value
The functiongetName()returns "Hydrogen" for this value
The functiongetDescription()returns "The measured chemical element hydrogen." for this valuePotassium
The functiongetCode()returns "ZK" for this value
The functiongetName()returns "Potassium" for this value
The functiongetDescription()returns "The measured chemical element potassium." for this valueMagnesium
The functiongetCode()returns "ZMG" for this value
The functiongetName()returns "Magnesium" for this value
The functiongetDescription()returns "The measured chemical element magnesium." for this valueManganese
The functiongetCode()returns "ZMN" for this value
The functiongetName()returns "Manganese" for this value
The functiongetDescription()returns "The measured chemical element manganese." for this valueMolybdenum
The functiongetCode()returns "ZMO" for this value
The functiongetName()returns "Molybdenum" for this value
The functiongetDescription()returns "The measured chemical element molybdenum." for this valueNitrogen
The functiongetCode()returns "ZN" for this value
The functiongetName()returns "Nitrogen" for this value
The functiongetDescription()returns "The measured chemical element nitrogen." for this valueSodium
The functiongetCode()returns "ZNA" for this value
The functiongetName()returns "Sodium" for this value
The functiongetDescription()returns "The measured chemical element sodium." for this valueNiobium
The functiongetCode()returns "ZNB" for this value
The functiongetName()returns "Niobium" for this value
The functiongetDescription()returns "The chemical element niobium." for this valueNickel
The functiongetCode()returns "ZNI" for this value
The functiongetName()returns "Nickel" for this value
The functiongetDescription()returns "The measured chemical element nickel." for this valueOxygen
The functiongetCode()returns "ZO" for this value
The functiongetName()returns "Oxygen" for this value
The functiongetDescription()returns "The measured chemical element oxygen." for this valuePhosphorus
The functiongetCode()returns "ZP" for this value
The functiongetName()returns "Phosphorus" for this value
The functiongetDescription()returns "The measured chemical element phosphorus." for this valueLead
The functiongetCode()returns "ZPB" for this value
The functiongetName()returns "Lead" for this value
The functiongetDescription()returns "The measured chemical element lead." for this valueSulphur
The functiongetCode()returns "ZS" for this value
The functiongetName()returns "Sulphur" for this value
The functiongetDescription()returns "The measured chemical element sulphur." for this valueAntimony
The functiongetCode()returns "ZSB" for this value
The functiongetName()returns "Antimony" for this value
The functiongetDescription()returns "The measured chemical element antimony." for this valueSelenium
The functiongetCode()returns "ZSE" for this value
The functiongetName()returns "Selenium" for this value
The functiongetDescription()returns "The measured chemical element selenium." for this valueSilicon
The functiongetCode()returns "ZSI" for this value
The functiongetName()returns "Silicon" for this value
The functiongetDescription()returns "The measured chemical element silicon." for this valueSilicium oxyd
The functiongetCode()returns "ZSL" for this value
The functiongetName()returns "Silicium oxyd" for this value
The functiongetDescription()returns "The measured substance silicium oxyd." for this valueTin
The functiongetCode()returns "ZSN" for this value
The functiongetName()returns "Tin" for this value
The functiongetDescription()returns "The measured chemical element tin." for this valueTantalium
The functiongetCode()returns "ZTA" for this value
The functiongetName()returns "Tantalium" for this value
The functiongetDescription()returns "The measured chemical element tantalium." for this valueTellurium
The functiongetCode()returns "ZTE" for this value
The functiongetName()returns "Tellurium" for this value
The functiongetDescription()returns "The measured chemical element tellurium." for this valueTitanium
The functiongetCode()returns "ZTI" for this value
The functiongetName()returns "Titanium" for this value
The functiongetDescription()returns "The measured chemical element titanium." for this valueVanadium
The functiongetCode()returns "ZV" for this value
The functiongetName()returns "Vanadium" for this value
The functiongetDescription()returns "The measured chemical element vanadium." for this valueTungsten
The functiongetCode()returns "ZW" for this value
The functiongetName()returns "Tungsten" for this value
The functiongetDescription()returns "The measured chemical element tungsten." for this valueWaste content
The functiongetCode()returns "ZWA" for this value
The functiongetName()returns "Waste content" for this value
The functiongetDescription()returns "The measured waste content." for this valueZinc
The functiongetCode()returns "ZZN" for this value
The functiongetName()returns "Zinc" for this value
The functiongetDescription()returns "The measured chemical element zinc." for this valueZirconium
The functiongetCode()returns "ZZR" for this value
The functiongetName()returns "Zirconium" for this value
The functiongetDescription()returns "The measured chemical element zirconium." for this valueMutually defined
The functiongetCode()returns "ZZZ" for this value
The functiongetName()returns "Mutually defined" for this value
The functiongetDescription()returns "A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list." for this value -
Method Summary
Modifier and TypeMethodDescriptionstatic Codes.CharacteristicfromString(String value) Convert a String to a Characteristic.getCode()Get the "Code" property valueGet the "Description" property valuegetName()Get the "Name" property valuestatic booleanisNativeValue(String value) Tests ifvalueOf(value)would return a non custom enum valuetoString()Returns a string representation of the Characteristic.static Codes.CharacteristicReturns the enum constant of this class with the specified name.static Codes.Characteristic[]values()Returns an array containing the constants of this enum class, in the order they are declared.Methods inherited from class Enum
compareTo, describeConstable, equals, getDeclaringClass, hashCode, name, ordinal, valueOf
-
Enum Constant Details
-
A
Consolidated weight
The functiongetCode()returns "A" for this value
The functiongetName()returns "Consolidated weight" for this value
The functiongetDescription()returns "The measured consolidated weight." for this value -
AAA
Net weight
The functiongetCode()returns "AAA" for this value
The functiongetName()returns "Net weight" for this value
The functiongetDescription()returns "Weight of goods including any packaging that normally going with the goods." for this value -
AAB
Goods item gross weight
The functiongetCode()returns "AAB" for this value
The functiongetName()returns "Goods item gross weight" for this value
The functiongetDescription()returns "Weight (mass) of goods including packing but excluding the carrier's equipment." for this value -
AAC
Total net weight
The functiongetCode()returns "AAC" for this value
The functiongetName()returns "Total net weight" for this value
The functiongetDescription()returns "Total weight of goods excluding packaging." for this value -
AAD
Consignment gross weight
The functiongetCode()returns "AAD" for this value
The functiongetName()returns "Consignment gross weight" for this value
The functiongetDescription()returns "Total gross weight (mass) of all goods items referred to as one consignment including packaging but excluding any transport equipment." for this value -
AAF
Net net weight
The functiongetCode()returns "AAF" for this value
The functiongetName()returns "Net net weight" for this value
The functiongetDescription()returns "Weight (mass) if goods without any packaging." for this value -
AAG
Stern thrust
The functiongetCode()returns "AAG" for this value
The functiongetName()returns "Stern thrust" for this value
The functiongetDescription()returns "Force exerted by a thruster installed at the stern of a vessel." for this value -
AAH
Bow thrust
The functiongetCode()returns "AAH" for this value
The functiongetName()returns "Bow thrust" for this value
The functiongetDescription()returns "Force exerted by a thruster installed at the bow of a vessel." for this value -
AAI
Hydrate content of an alcoholic product at bottling
The functiongetCode()returns "AAI" for this value
The functiongetName()returns "Hydrate content of an alcoholic product at bottling" for this value
The functiongetDescription()returns "The hydrate content of an alcoholic product at the moment of bottling." for this value -
AAJ
Number of units per pallet
The functiongetCode()returns "AAJ" for this value
The functiongetName()returns "Number of units per pallet" for this value
The functiongetDescription()returns "The number of units contained on a pallet." for this value -
AAK
Fat content
The functiongetCode()returns "AAK" for this value
The functiongetName()returns "Fat content" for this value
The functiongetDescription()returns "An indication of the fat content of a product." for this value -
AAM
Transport means gross weight
The functiongetCode()returns "AAM" for this value
The functiongetName()returns "Transport means gross weight" for this value
The functiongetDescription()returns "The measure of the overall size of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships." for this value -
AAN
Net tonnage of the vessel
The functiongetCode()returns "AAN" for this value
The functiongetName()returns "Net tonnage of the vessel" for this value
The functiongetDescription()returns "The measure of the useful capacity of a ship determined in accordance with the provisions of the International Convention on Tonnage Measurement of Ships." for this value -
AAO
Humidity
The functiongetCode()returns "AAO" for this value
The functiongetName()returns "Humidity" for this value
The functiongetDescription()returns "Degree of moisture." for this value -
AAP
Voltage
The functiongetCode()returns "AAP" for this value
The functiongetName()returns "Voltage" for this value
The functiongetDescription()returns "Electromotive force, or difference of electronic potential between two points." for this value -
AAQ
Power consumption
The functiongetCode()returns "AAQ" for this value
The functiongetName()returns "Power consumption" for this value
The functiongetDescription()returns "Value of energy consumption." for this value -
AAR
Heat dissipation
The functiongetCode()returns "AAR" for this value
The functiongetName()returns "Heat dissipation" for this value
The functiongetDescription()returns "Measurement of the rate of dispersal of heat." for this value -
AAS
Air flow
The functiongetCode()returns "AAS" for this value
The functiongetName()returns "Air flow" for this value
The functiongetDescription()returns "Measurement of the flow of air." for this value -
AAT
Shock impact
The functiongetCode()returns "AAT" for this value
The functiongetName()returns "Shock impact" for this value
The functiongetDescription()returns "Measurement of the impact of a shock." for this value -
AAU
Operative temperature
The functiongetCode()returns "AAU" for this value
The functiongetName()returns "Operative temperature" for this value
The functiongetDescription()returns "Temperature identified system or process works according to specifications." for this value -
AAV
Non operative temperature
The functiongetCode()returns "AAV" for this value
The functiongetName()returns "Non operative temperature" for this value
The functiongetDescription()returns "Temperature identified system or process does not work according to specifications." for this value -
AAW
Gross volume
The functiongetCode()returns "AAW" for this value
The functiongetName()returns "Gross volume" for this value
The functiongetDescription()returns "The volume unadjusted for factors such as temperature or gravity." for this value -
AAX
Net volume
The functiongetCode()returns "AAX" for this value
The functiongetName()returns "Net volume" for this value
The functiongetDescription()returns "The volume after adjustment for factors such as temperature or gravity." for this value -
AAY
Water content
The functiongetCode()returns "AAY" for this value
The functiongetName()returns "Water content" for this value
The functiongetDescription()returns "Water content in product." for this value -
AAZ
Tensile stress
The functiongetCode()returns "AAZ" for this value
The functiongetName()returns "Tensile stress" for this value
The functiongetDescription()returns "The measured tensile stress." for this value -
ABA
Fibrosity
The functiongetCode()returns "ABA" for this value
The functiongetName()returns "Fibrosity" for this value
The functiongetDescription()returns "The measured fibrosity." for this value -
ABB
Gauge length
The functiongetCode()returns "ABB" for this value
The functiongetName()returns "Gauge length" for this value
The functiongetDescription()returns "The measured gauge length." for this value -
ABC
Radius
The functiongetCode()returns "ABC" for this value
The functiongetName()returns "Radius" for this value
The functiongetDescription()returns "The measured radius." for this value -
ABD
Straightness
The functiongetCode()returns "ABD" for this value
The functiongetName()returns "Straightness" for this value
The functiongetDescription()returns "Straightness of the item." for this value -
ABE
Strain
The functiongetCode()returns "ABE" for this value
The functiongetName()returns "Strain" for this value
The functiongetDescription()returns "The measured strain." for this value -
ABF
Item width when unrolled
The functiongetCode()returns "ABF" for this value
The functiongetName()returns "Item width when unrolled" for this value
The functiongetDescription()returns "The width of an item when unrolled." for this value -
ABG
Item length when unrolled
The functiongetCode()returns "ABG" for this value
The functiongetName()returns "Item length when unrolled" for this value
The functiongetDescription()returns "The length of an item when unrolled." for this value -
ABH
Item area when unrolled
The functiongetCode()returns "ABH" for this value
The functiongetName()returns "Item area when unrolled" for this value
The functiongetDescription()returns "The area occupied by an item when unrolled." for this value -
ABI
Original wort
The functiongetCode()returns "ABI" for this value
The functiongetName()returns "Original wort" for this value
The functiongetDescription()returns "Measure of the malt and hops content of beer, before fermentation has taken place." for this value -
ABJ
Volume
The functiongetCode()returns "ABJ" for this value
The functiongetName()returns "Volume" for this value
The functiongetDescription()returns "The amount of air space taken up by the entity identified in the 6311 qualifier." for this value -
ABK
Angle
The functiongetCode()returns "ABK" for this value
The functiongetName()returns "Angle" for this value
The functiongetDescription()returns "The angle of an object." for this value -
ABL
Peg hole horizontal distance from package leftmost edge
The functiongetCode()returns "ABL" for this value
The functiongetName()returns "Peg hole horizontal distance from package leftmost edge" for this value
The functiongetDescription()returns "Horizontal distance from the left most edge of the package to the center of the hole into which the peg is inserted." for this value -
ABM
Peg hole vertical distance from package top
The functiongetCode()returns "ABM" for this value
The functiongetName()returns "Peg hole vertical distance from package top" for this value
The functiongetDescription()returns "Vertical distance from the top of the package to the top of the hole into which the peg is inserted." for this value -
ABN
Number of layers per pallet
The functiongetCode()returns "ABN" for this value
The functiongetName()returns "Number of layers per pallet" for this value
The functiongetDescription()returns "The number of layers per pallet." for this value -
ABO
Product strengh, chemical
The functiongetCode()returns "ABO" for this value
The functiongetName()returns "Product strengh, chemical" for this value
The functiongetDescription()returns "The amount of the single active chemical ingredient within a product." for this value -
ABP
Product strength basis, chemical
The functiongetCode()returns "ABP" for this value
The functiongetName()returns "Product strength basis, chemical" for this value
The functiongetDescription()returns "Amount of product used as the basis for the specification of the chemical product strenght." for this value -
ABS
Item weight
The functiongetCode()returns "ABS" for this value
The functiongetName()returns "Item weight" for this value
The functiongetDescription()returns "Weight at line item level." for this value -
ABT
Payload weight, maximum
The functiongetCode()returns "ABT" for this value
The functiongetName()returns "Payload weight, maximum" for this value
The functiongetDescription()returns "The maximum weight of a payload." for this value -
ABX
Weight of conveyance
The functiongetCode()returns "ABX" for this value
The functiongetName()returns "Weight of conveyance" for this value
The functiongetDescription()returns "Tonnage of conveyance." for this value -
ABY
Conveyance summer dead weight
The functiongetCode()returns "ABY" for this value
The functiongetName()returns "Conveyance summer dead weight" for this value
The functiongetDescription()returns "Registered summer dead weight total tonnage of the vessel." for this value -
ABZ
Containerized cargo on vessel's weight
The functiongetCode()returns "ABZ" for this value
The functiongetName()returns "Containerized cargo on vessel's weight" for this value
The functiongetDescription()returns "Total weight of containerized cargo on vessel." for this value -
ACA
Non-containerized cargo on vessel's weight
The functiongetCode()returns "ACA" for this value
The functiongetName()returns "Non-containerized cargo on vessel's weight" for this value
The functiongetDescription()returns "Total weight of non-containerized cargo on vessel." for this value -
ACE
Ascertained weight
The functiongetCode()returns "ACE" for this value
The functiongetName()returns "Ascertained weight" for this value
The functiongetDescription()returns "Endorsement of the true weight (mass) as ascertained or verified." for this value -
ACG
Chargeable weight
The functiongetCode()returns "ACG" for this value
The functiongetName()returns "Chargeable weight" for this value
The functiongetDescription()returns "The weight on which charges are based." for this value -
ACN
Estimated gross weight
The functiongetCode()returns "ACN" for this value
The functiongetName()returns "Estimated gross weight" for this value
The functiongetDescription()returns "Estimated weight (mass) of goods, including packing and excluding carrier's." for this value -
ACP
Estimated volume
The functiongetCode()returns "ACP" for this value
The functiongetName()returns "Estimated volume" for this value
The functiongetDescription()returns "Estimated size or measure of anything in three dimensions." for this value -
ACS
Vessel overall length
The functiongetCode()returns "ACS" for this value
The functiongetName()returns "Vessel overall length" for this value
The functiongetDescription()returns "Total overall length of the vessel." for this value -
ACV
Loading meters
The functiongetCode()returns "ACV" for this value
The functiongetName()returns "Loading meters" for this value
The functiongetDescription()returns "The length in a vehicle, whereby the complete width and height over that length is needed for the goods." for this value -
ACW
Number of axles
The functiongetCode()returns "ACW" for this value
The functiongetName()returns "Number of axles" for this value
The functiongetDescription()returns "Number of axles of movable equipment or means of transport on wheels." for this value -
ACX
Payload
The functiongetCode()returns "ACX" for this value
The functiongetName()returns "Payload" for this value
The functiongetDescription()returns "The revenue-producing load carried by a means of transport." for this value -
ADR
Start position in the length
The functiongetCode()returns "ADR" for this value
The functiongetName()returns "Start position in the length" for this value
The functiongetDescription()returns "The starting position from the beginning of an item located in the length direction." for this value -
ADS
End position in the length
The functiongetCode()returns "ADS" for this value
The functiongetName()returns "End position in the length" for this value
The functiongetDescription()returns "The end position from the beginning of an item located in the length direction." for this value -
ADT
Start position in the width
The functiongetCode()returns "ADT" for this value
The functiongetName()returns "Start position in the width" for this value
The functiongetDescription()returns "The start position from the beginning of an item located in the width direction." for this value -
ADU
End position in the width
The functiongetCode()returns "ADU" for this value
The functiongetName()returns "End position in the width" for this value
The functiongetDescription()returns "The end position from the beginning of an item located in the width direction." for this value -
ADV
Start position in the thickness
The functiongetCode()returns "ADV" for this value
The functiongetName()returns "Start position in the thickness" for this value
The functiongetDescription()returns "The start position from the beginning of an item located in the thickness direction." for this value -
ADW
End position in the thickness
The functiongetCode()returns "ADW" for this value
The functiongetName()returns "End position in the thickness" for this value
The functiongetDescription()returns "The end position from the beginning of an item located in the thickness direction." for this value -
ADX
Transport container actual filling weight
The functiongetCode()returns "ADX" for this value
The functiongetName()returns "Transport container actual filling weight" for this value
The functiongetDescription()returns "Actual filling weight of a transport container." for this value -
ADY
Transport container maximum capacity
The functiongetCode()returns "ADY" for this value
The functiongetName()returns "Transport container maximum capacity" for this value
The functiongetDescription()returns "Maximum capacity of a transport container." for this value -
ADZ
Declared net weight
The functiongetCode()returns "ADZ" for this value
The functiongetName()returns "Declared net weight" for this value
The functiongetDescription()returns "The declared net weight of a product or products used for invoicing, customs or transport purposes." for this value -
AEA
Loading height
The functiongetCode()returns "AEA" for this value
The functiongetName()returns "Loading height" for this value
The functiongetDescription()returns "Maximum height of products or packages loaded onto a given transportation device or equipment such as a pallet." for this value -
AEB
Stacking height
The functiongetCode()returns "AEB" for this value
The functiongetName()returns "Stacking height" for this value
The functiongetDescription()returns "Maximum height up to which the same product or package may be placed one upon the other for storage purposes." for this value -
AEC
Calculated weight
The functiongetCode()returns "AEC" for this value
The functiongetName()returns "Calculated weight" for this value
The functiongetDescription()returns "The calculated weight of the item based on the ordered dimensions." for this value -
AED
Ferrite
The functiongetCode()returns "AED" for this value
The functiongetName()returns "Ferrite" for this value
The functiongetDescription()returns "The chemical composition ferrite." for this value -
AEE
Impurity
The functiongetCode()returns "AEE" for this value
The functiongetName()returns "Impurity" for this value
The functiongetDescription()returns "The impurity of the product i.e. the measurement of other chemical elements not normally appearing in a product." for this value -
AEF
Grain size
The functiongetCode()returns "AEF" for this value
The functiongetName()returns "Grain size" for this value
The functiongetDescription()returns "The grain size." for this value -
AEG
Lanthanides
The functiongetCode()returns "AEG" for this value
The functiongetName()returns "Lanthanides" for this value
The functiongetDescription()returns "The chemical element Lanthanides." for this value -
AEH
Elasticity
The functiongetCode()returns "AEH" for this value
The functiongetName()returns "Elasticity" for this value
The functiongetDescription()returns "The value of the elasticity." for this value -
AEI
Drained weight
The functiongetCode()returns "AEI" for this value
The functiongetName()returns "Drained weight" for this value
The functiongetDescription()returns "The weight of a product when all liquids used in the packaging of the product have been removed." for this value -
AEJ
Gallium
The functiongetCode()returns "AEJ" for this value
The functiongetName()returns "Gallium" for this value
The functiongetDescription()returns "Measurement of the gallium component." for this value -
AEK
Strontium
The functiongetCode()returns "AEK" for this value
The functiongetName()returns "Strontium" for this value
The functiongetDescription()returns "Measurement of the strontium component." for this value -
AEL
Area
The functiongetCode()returns "AEL" for this value
The functiongetName()returns "Area" for this value
The functiongetDescription()returns "Extent or measure of a surface." for this value -
AEM
Equipment storage limitation
The functiongetCode()returns "AEM" for this value
The functiongetName()returns "Equipment storage limitation" for this value
The functiongetDescription()returns "Maximum storage limit of the equipment." for this value -
AEN
Radioactive index of transport
The functiongetCode()returns "AEN" for this value
The functiongetName()returns "Radioactive index of transport" for this value
The functiongetDescription()returns "The index of transport determines the maximum radiation level at a distance of 1m from the external surface." for this value -
AEO
Radioactivity
The functiongetCode()returns "AEO" for this value
The functiongetName()returns "Radioactivity" for this value
The functiongetDescription()returns "Activity of radioactive material." for this value -
AEP
Average gross weight
The functiongetCode()returns "AEP" for this value
The functiongetName()returns "Average gross weight" for this value
The functiongetDescription()returns "Weight which is the outcome of the division of the total gross weight by the number of units." for this value -
AEQ
Forward draft
The functiongetCode()returns "AEQ" for this value
The functiongetName()returns "Forward draft" for this value
The functiongetDescription()returns "Depth of water from the surface of water to the bottom of the vessel measured at the draft mark of the bow." for this value -
AER
After draft
The functiongetCode()returns "AER" for this value
The functiongetName()returns "After draft" for this value
The functiongetDescription()returns "Depth of water from the surface of water to the bottom of the vessel measured at the draft mark of the stern." for this value -
AES
Acidity
The functiongetCode()returns "AES" for this value
The functiongetName()returns "Acidity" for this value
The functiongetDescription()returns "The quality, state, or degree of being acid." for this value -
AET
Transport equipment gross weight
The functiongetCode()returns "AET" for this value
The functiongetName()returns "Transport equipment gross weight" for this value
The functiongetDescription()returns "Weight of a transport equipment including the cargo and carrier's equipment." for this value -
AEU
Total transport equipment gross weight
The functiongetCode()returns "AEU" for this value
The functiongetName()returns "Total transport equipment gross weight" for this value
The functiongetDescription()returns "Total weight of all transport equipment including the cargo and carrier's equipment." for this value -
AEV
Acidity of juice
The functiongetCode()returns "AEV" for this value
The functiongetName()returns "Acidity of juice" for this value
The functiongetDescription()returns "Acid measurement of juice." for this value -
AEW
Penetrometry
The functiongetCode()returns "AEW" for this value
The functiongetName()returns "Penetrometry" for this value
The functiongetDescription()returns "Measurement of force required to drive a standard penetrating stamp." for this value -
AEX
Durofel
The functiongetCode()returns "AEX" for this value
The functiongetName()returns "Durofel" for this value
The functiongetDescription()returns "Measurement of the elastic force using a standard penetrating stamp." for this value -
AEY
Juice weight per 100 grams
The functiongetCode()returns "AEY" for this value
The functiongetName()returns "Juice weight per 100 grams" for this value
The functiongetDescription()returns "Measurement of weight of juice, based on 100 grams of the entire weight." for this value -
AEZ
Fruit skin colour
The functiongetCode()returns "AEZ" for this value
The functiongetName()returns "Fruit skin colour" for this value
The functiongetDescription()returns "Measurement of the colouring of the epidermis of a fruit." for this value -
AF
Angle of bend
The functiongetCode()returns "AF" for this value
The functiongetName()returns "Angle of bend" for this value
The functiongetDescription()returns "The measured angle of bend." for this value -
AFA
Fixed incremental measurement
The functiongetCode()returns "AFA" for this value
The functiongetName()returns "Fixed incremental measurement" for this value
The functiongetDescription()returns "The measurement of the fixed increment." for this value -
AFB
Durofel D10
The functiongetCode()returns "AFB" for this value
The functiongetName()returns "Durofel D10" for this value
The functiongetDescription()returns "Measure of the elastic force of the pulp of a fruit. It is measured with a penetrating stamp with diameter 10." for this value -
AFC
Durofel D25
The functiongetCode()returns "AFC" for this value
The functiongetName()returns "Durofel D25" for this value
The functiongetDescription()returns "Measure of the elastic force of the pulp of a fruit. It is measured with a penetrating stamp with diameter 25." for this value -
AFD
Durofel D50
The functiongetCode()returns "AFD" for this value
The functiongetName()returns "Durofel D50" for this value
The functiongetDescription()returns "Measure of the elastic force of the pulp of a fruit. It is measured with a penetrating stamp with diameter 50." for this value -
AFE
Maximum stacking weight
The functiongetCode()returns "AFE" for this value
The functiongetName()returns "Maximum stacking weight" for this value
The functiongetDescription()returns "The maximum weight which may be stacked upon a product or package without the product or packaging being crushed." for this value -
AFF
Gross measure cube
The functiongetCode()returns "AFF" for this value
The functiongetName()returns "Gross measure cube" for this value
The functiongetDescription()returns "The total cubic space occupied by an item, taking into account any protruding components, arrived at by multiplying the maximum length, width and height." for this value -
AFG
Percentage fat content in dry matter
The functiongetCode()returns "AFG" for this value
The functiongetName()returns "Percentage fat content in dry matter" for this value
The functiongetDescription()returns "The percentage of fat content in dry matter." for this value -
AFH
Saccharometric content
The functiongetCode()returns "AFH" for this value
The functiongetName()returns "Saccharometric content" for this value
The functiongetDescription()returns "Measurement of the sugar content of a solution." for this value -
AFI
Hydrate content of an alcoholic product after bottling
The functiongetCode()returns "AFI" for this value
The functiongetName()returns "Hydrate content of an alcoholic product after bottling" for this value
The functiongetDescription()returns "The hydrate content which occurs in an alcoholic product after bottling." for this value -
AFJ
Anhydrous content
The functiongetCode()returns "AFJ" for this value
The functiongetName()returns "Anhydrous content" for this value
The functiongetDescription()returns "The non-water content." for this value -
AFK
Certified weight
The functiongetCode()returns "AFK" for this value
The functiongetName()returns "Certified weight" for this value
The functiongetDescription()returns "Weight which has been certified." for this value -
AFL
Freeboard
The functiongetCode()returns "AFL" for this value
The functiongetName()returns "Freeboard" for this value
The functiongetDescription()returns "The vertical distance between the waterline and the upper edge of the deck line." for this value -
AFM
Maximum vessel draught
The functiongetCode()returns "AFM" for this value
The functiongetName()returns "Maximum vessel draught" for this value
The functiongetDescription()returns "The depth of water needed to float the ship (Maximum vessel draught according to Load Line Certificate IMO, MSC/Circ. 920 15 June 1999)." for this value -
AFN
Net explosive weight
The functiongetCode()returns "AFN" for this value
The functiongetName()returns "Net explosive weight" for this value
The functiongetDescription()returns "Mass of the explosive part or substance of goods without any packing." for this value -
AFO
Radioactive criticality safety index
The functiongetCode()returns "AFO" for this value
The functiongetName()returns "Radioactive criticality safety index" for this value
The functiongetDescription()returns "A number, assigned to fissile material i.e. material capable of sustaining a nuclear chain reaction, which is used to provide control over the accumulation of packages containing such material." for this value -
AFP
Waste currently on board
The functiongetCode()returns "AFP" for this value
The functiongetName()returns "Waste currently on board" for this value
The functiongetDescription()returns "Amount of waste on board at the moment of the notification." for this value -
AFQ
Waste to be delivered at waste reception facility
The functiongetCode()returns "AFQ" for this value
The functiongetName()returns "Waste to be delivered at waste reception facility" for this value
The functiongetDescription()returns "Amount of waste to be delivered to a waste reception facility, e.g. in the port of call." for this value -
AFR
Waste to be generated until next port of call, estimated
The functiongetCode()returns "AFR" for this value
The functiongetName()returns "Waste to be generated until next port of call, estimated" for this value
The functiongetDescription()returns "Estimated amount of waste to be generated between creation of the current notification and arrival in the next port of call, irrespective of use of incinerator or compactor or disposal at sea." for this value -
AFS
Waste remaining on board at departure
The functiongetCode()returns "AFS" for this value
The functiongetName()returns "Waste remaining on board at departure" for this value
The functiongetDescription()returns "Amount of waste remaining on board when leaving the port of call." for this value -
AFT
Colour depth
The functiongetCode()returns "AFT" for this value
The functiongetName()returns "Colour depth" for this value
The functiongetDescription()returns "The number of distinct colours represented, e.g. in an image or in a display." for this value -
AFU
Colour depth, maximum
The functiongetCode()returns "AFU" for this value
The functiongetName()returns "Colour depth, maximum" for this value
The functiongetDescription()returns "The maximum number of distinct colours that can be represented, e.g. in an image or in a display." for this value -
AFV
Image resolution
The functiongetCode()returns "AFV" for this value
The functiongetName()returns "Image resolution" for this value
The functiongetDescription()returns "The level of detail of an image." for this value -
AFW
Device resolution, maximum
The functiongetCode()returns "AFW" for this value
The functiongetName()returns "Device resolution, maximum" for this value
The functiongetDescription()returns "The maximum level of detail produced by a device." for this value -
AFX
Acoustic absorption coefficient
The functiongetCode()returns "AFX" for this value
The functiongetName()returns "Acoustic absorption coefficient" for this value
The functiongetDescription()returns "The portion of sound energy a surface absorbs, measured at different frequencies." for this value -
B
Billed weight
The functiongetCode()returns "B" for this value
The functiongetName()returns "Billed weight" for this value
The functiongetDescription()returns "The measured billed weight." for this value -
BL
Breaking load
The functiongetCode()returns "BL" for this value
The functiongetName()returns "Breaking load" for this value
The functiongetDescription()returns "The measured breaking load." for this value -
BMY
Platinum
The functiongetCode()returns "BMY" for this value
The functiongetName()returns "Platinum" for this value
The functiongetDescription()returns "The measurement of the platinum component." for this value -
BMZ
Silver
The functiongetCode()returns "BMZ" for this value
The functiongetName()returns "Silver" for this value
The functiongetDescription()returns "The measurement of the silver component." for this value -
BNA
List
The functiongetCode()returns "BNA" for this value
The functiongetName()returns "List" for this value
The functiongetDescription()returns "The leaning or inclination of a vessel expressed in degrees port or starboard." for this value -
BNB
Trim
The functiongetCode()returns "BNB" for this value
The functiongetName()returns "Trim" for this value
The functiongetDescription()returns "The condition of a vessel with reference to its longitudinal axis." for this value -
BNC
Free water
The functiongetCode()returns "BNC" for this value
The functiongetName()returns "Free water" for this value
The functiongetDescription()returns "The volume of water present in a container that is not in suspension in the contained liquid." for this value -
BND
Bands
The functiongetCode()returns "BND" for this value
The functiongetName()returns "Bands" for this value
The functiongetDescription()returns "The measured bands." for this value -
BNE
API (American Petroleum Institute) gravity
The functiongetCode()returns "BNE" for this value
The functiongetName()returns "API (American Petroleum Institute) gravity" for this value
The functiongetDescription()returns "The relative density of petroleum liquids as specified by a standard developed by the API." for this value -
BNF
Petroleum gross observed volume
The functiongetCode()returns "BNF" for this value
The functiongetName()returns "Petroleum gross observed volume" for this value
The functiongetDescription()returns "The total volume of all petroleum liquids and sediment and water, excluding free water, at observed temperature and pressure." for this value -
BNG
Petroleum gross standard volume
The functiongetCode()returns "BNG" for this value
The functiongetName()returns "Petroleum gross standard volume" for this value
The functiongetDescription()returns "The total volume of all petroleum liquids, sediment, and water excluding free water, corrected by the appropriate volume correction factor for the observed temperature and American Petroleum Institute relative density, or density to a standard temperature." for this value -
BNH
Volume variance
The functiongetCode()returns "BNH" for this value
The functiongetName()returns "Volume variance" for this value
The functiongetDescription()returns "The change in the volume measurement." for this value -
BNI
Petroleum net standard volume
The functiongetCode()returns "BNI" for this value
The functiongetName()returns "Petroleum net standard volume" for this value
The functiongetDescription()returns "The total volume of all petroleum liquids, excluding sediment and water and free water, corrected by the appropriate volume correction factor for the observed temperature and American Petroleum Institute gravity relative to density or to a standard temperature." for this value -
BNJ
Material on-board quantity, after discharge
The functiongetCode()returns "BNJ" for this value
The functiongetName()returns "Material on-board quantity, after discharge" for this value
The functiongetDescription()returns "The material in vessel tanks, void spaces, and pipelines after discharge." for this value -
BNK
Petroleum total calculated volume
The functiongetCode()returns "BNK" for this value
The functiongetName()returns "Petroleum total calculated volume" for this value
The functiongetDescription()returns "The total volume of all petroleum liquids, sediment and water corrected by the appropriate volume correction factor for the observed temperature and American Petroleum Institute (API) gravity, relative density, or density to a standard temperature." for this value -
BNL
Petroleum total observed volume
The functiongetCode()returns "BNL" for this value
The functiongetName()returns "Petroleum total observed volume" for this value
The functiongetDescription()returns "The total volume of all petroleum liquids, sediment and water and free water at observed temperature and pressure." for this value -
BNM
Innage gauge distance
The functiongetCode()returns "BNM" for this value
The functiongetName()returns "Innage gauge distance" for this value
The functiongetDescription()returns "The measured distance from the surface of the liquid to a fixed datum plate or to the tank bottom." for this value -
BNN
Petroleum net standard weight
The functiongetCode()returns "BNN" for this value
The functiongetName()returns "Petroleum net standard weight" for this value
The functiongetDescription()returns "The total weight of all petroleum liquids excluding sediments, water and free water." for this value -
BNO
Sediment and water in petroleum
The functiongetCode()returns "BNO" for this value
The functiongetName()returns "Sediment and water in petroleum" for this value
The functiongetDescription()returns "The measurement of non-hydrocarbon solid material and water in suspension in petroleum liquid." for this value -
BNP
Observed reference height, tank
The functiongetCode()returns "BNP" for this value
The functiongetName()returns "Observed reference height, tank" for this value
The functiongetDescription()returns "The observed distance from the tank bottom or datum plate to the established reference point." for this value -
BNQ
Reference height, tank
The functiongetCode()returns "BNQ" for this value
The functiongetName()returns "Reference height, tank" for this value
The functiongetDescription()returns "The measured distance from the tank bottom or datum plate to the established reference point." for this value -
BNR
Ullage gauge distance
The functiongetCode()returns "BNR" for this value
The functiongetName()returns "Ullage gauge distance" for this value
The functiongetDescription()returns "The measured distance from the cargo liquid surface to the reference point." for this value -
BNS
Trim correction
The functiongetCode()returns "BNS" for this value
The functiongetName()returns "Trim correction" for this value
The functiongetDescription()returns "The correction applied to the observed gauge or observed volume when a vessel is not on an even keel." for this value -
BNT
Bow to bridge distance
The functiongetCode()returns "BNT" for this value
The functiongetName()returns "Bow to bridge distance" for this value
The functiongetDescription()returns "The distance between the bow and the bridge of a vessel." for this value -
BNU
Peg hole number
The functiongetCode()returns "BNU" for this value
The functiongetName()returns "Peg hole number" for this value
The functiongetDescription()returns "Used to identify the peg hole if more than one hole is present in the product or packaging." for this value -
BNV
Number of inner packs
The functiongetCode()returns "BNV" for this value
The functiongetName()returns "Number of inner packs" for this value
The functiongetDescription()returns "Indicates the number of non coded physical groupings (inner packs) of next lower level trade items within the current trade item level." for this value -
BNW
Number of next level trade items within inner pack
The functiongetCode()returns "BNW" for this value
The functiongetName()returns "Number of next level trade items within inner pack" for this value
The functiongetDescription()returns "The number of next lower level trade items contained within the physical non-coded grouping (inner pack)." for this value -
BNX
Number of trade items per pallet layer
The functiongetCode()returns "BNX" for this value
The functiongetName()returns "Number of trade items per pallet layer" for this value
The functiongetDescription()returns "The number of trade items contained on a single layer of a pallet." for this value -
BNY
Packed items layer height
The functiongetCode()returns "BNY" for this value
The functiongetName()returns "Packed items layer height" for this value
The functiongetDescription()returns "The height of a single layer of packed items." for this value -
BNZ
Packing material weight, skin tight covering
The functiongetCode()returns "BNZ" for this value
The functiongetName()returns "Packing material weight, skin tight covering" for this value
The functiongetDescription()returns "The weight measurement of the packing material used for skin tight covering (e.g. when packaging prepared meats, poultry, cheese, and other food products)." for this value -
BR
Brightness
The functiongetCode()returns "BR" for this value
The functiongetName()returns "Brightness" for this value
The functiongetDescription()returns "The measured brightness." for this value -
BRA
Brakes
The functiongetCode()returns "BRA" for this value
The functiongetName()returns "Brakes" for this value
The functiongetDescription()returns "The measured brakes." for this value -
BRB
Components labelled for recycling percentage
The functiongetCode()returns "BRB" for this value
The functiongetName()returns "Components labelled for recycling percentage" for this value
The functiongetDescription()returns "Percentage of trade item components that clearly label how to facilitate product disassembly and recycling." for this value -
BRC
Renewable plastic components percentage, by net weight
The functiongetCode()returns "BRC" for this value
The functiongetName()returns "Renewable plastic components percentage, by net weight" for this value
The functiongetDescription()returns "The percentage of the plastic components only made from rapidly renewable plant-based material by net weight of product." for this value -
BRD
Clamp pressure, required
The functiongetCode()returns "BRD" for this value
The functiongetName()returns "Clamp pressure, required" for this value
The functiongetDescription()returns "The pressure that should be applied by a clamp." for this value -
BRE
Break
The functiongetCode()returns "BRE" for this value
The functiongetName()returns "Break" for this value
The functiongetDescription()returns "The measured break." for this value -
BRF
Ascertained volume
The functiongetCode()returns "BRF" for this value
The functiongetName()returns "Ascertained volume" for this value
The functiongetDescription()returns "Endorsement of the true volume as ascertained or verified." for this value -
BRG
Unit weight
The functiongetCode()returns "BRG" for this value
The functiongetName()returns "Unit weight" for this value
The functiongetDescription()returns "The weight of a unit." for this value -
BRH
Total volume
The functiongetCode()returns "BRH" for this value
The functiongetName()returns "Total volume" for this value
The functiongetDescription()returns "Total volume of goods and/or parcels." for this value -
BRI
Unit volume
The functiongetCode()returns "BRI" for this value
The functiongetName()returns "Unit volume" for this value
The functiongetDescription()returns "The volume of a unit." for this value -
BRJ
Vertical center of gravity
The functiongetCode()returns "BRJ" for this value
The functiongetName()returns "Vertical center of gravity" for this value
The functiongetDescription()returns "Distance of vertical center of gravity relative to item's base." for this value -
BRK
Maximum allowable transport stacking weight
The functiongetCode()returns "BRK" for this value
The functiongetName()returns "Maximum allowable transport stacking weight" for this value
The functiongetDescription()returns "Maximum weight allowed to be stowed on top of an item during transport." for this value -
BRL
Carbon Dioxide
The functiongetCode()returns "BRL" for this value
The functiongetName()returns "Carbon Dioxide" for this value
The functiongetDescription()returns "Measurement of the carbon dioxide (C02) component." for this value -
BRM
Number of base units per pallet
The functiongetCode()returns "BRM" for this value
The functiongetName()returns "Number of base units per pallet" for this value
The functiongetDescription()returns "The number of base units contained on a pallet." for this value -
BRN
Colony forming unit
The functiongetCode()returns "BRN" for this value
The functiongetName()returns "Colony forming unit" for this value
The functiongetDescription()returns "Micro-organism colonies that are to be counted under determined conditions." for this value -
BRO
Diluted liquid volume
The functiongetCode()returns "BRO" for this value
The functiongetName()returns "Diluted liquid volume" for this value
The functiongetDescription()returns "The volume of liquid which results after a dilution agent has been added, e.g. undiluted orange juice of 200ml, after dilution with water the volume of diluted liquid equals 1 litre." for this value -
BRP
Energy efficiency
The functiongetCode()returns "BRP" for this value
The functiongetName()returns "Energy efficiency" for this value
The functiongetDescription()returns "A measurement of the energy efficiency of an article." for this value -
BRQ
Number of layers
The functiongetCode()returns "BRQ" for this value
The functiongetName()returns "Number of layers" for this value
The functiongetDescription()returns "Number of layers of a product or products within a package, container, etc." for this value -
BRR
Maximum demand
The functiongetCode()returns "BRR" for this value
The functiongetName()returns "Maximum demand" for this value
The functiongetDescription()returns "The highest demand recorded during the period of recording of usage of the supply." for this value -
BRS
Number of pallet places
The functiongetCode()returns "BRS" for this value
The functiongetName()returns "Number of pallet places" for this value
The functiongetDescription()returns "The number of pallet places needed to store or to transport pallets (can be stacked)." for this value -
BRT
Package net measurement, cubed
The functiongetCode()returns "BRT" for this value
The functiongetName()returns "Package net measurement, cubed" for this value
The functiongetDescription()returns "An indication of the net cubed measurement of a package." for this value -
BRU
Power factor
The functiongetCode()returns "BRU" for this value
The functiongetName()returns "Power factor" for this value
The functiongetDescription()returns "The ratio of the power dissipated (active power in kW) to the total power (which is the product of the input volts times amps given in kVa). When equipment which uses reactive power is being operated the power factor will be less than one." for this value -
BRV
Stacking factor excluding bottom item
The functiongetCode()returns "BRV" for this value
The functiongetName()returns "Stacking factor excluding bottom item" for this value
The functiongetDescription()returns "Maximum number of identical items stackable on top of item." for this value -
BS
Breaking strength
The functiongetCode()returns "BS" for this value
The functiongetName()returns "Breaking strength" for this value
The functiongetDescription()returns "The measured breaking strength." for this value -
BSW
Breaking strength wet
The functiongetCode()returns "BSW" for this value
The functiongetName()returns "Breaking strength wet" for this value
The functiongetDescription()returns "The measured breaking strength when wet." for this value -
BSX
Step size
The functiongetCode()returns "BSX" for this value
The functiongetName()returns "Step size" for this value
The functiongetDescription()returns "An indication of measurements in which options contained within a Customer Specific Article are available, e.g. 10 metre planks of wood may be sold in step sizes of 2 metres." for this value -
BSY
Number of units per package
The functiongetCode()returns "BSY" for this value
The functiongetName()returns "Number of units per package" for this value
The functiongetDescription()returns "The number of identified units per package." for this value -
BSZ
Number of units per layer
The functiongetCode()returns "BSZ" for this value
The functiongetName()returns "Number of units per layer" for this value
The functiongetDescription()returns "Number of units of a product or package within one layer of a package, container, etc." for this value -
BTA
Weight per running metre
The functiongetCode()returns "BTA" for this value
The functiongetName()returns "Weight per running metre" for this value
The functiongetDescription()returns "A code used to indicate the weight per running metre of floor coverings over floor area." for this value -
BTB
Weight per square metre
The functiongetCode()returns "BTB" for this value
The functiongetName()returns "Weight per square metre" for this value
The functiongetDescription()returns "A code used to indicate the weight per square metre of floor coverings over floor area." for this value -
BTC
Acidity of meat
The functiongetCode()returns "BTC" for this value
The functiongetName()returns "Acidity of meat" for this value
The functiongetDescription()returns "The meat's acid quality or condition." for this value -
BTD
Slaughtering weight
The functiongetCode()returns "BTD" for this value
The functiongetName()returns "Slaughtering weight" for this value
The functiongetDescription()returns "Weight immediately after slaughter." for this value -
BTE
Stacking factor including bottom item
The functiongetCode()returns "BTE" for this value
The functiongetName()returns "Stacking factor including bottom item" for this value
The functiongetDescription()returns "Maximum number of items stackable upon each other, including the bottom item." for this value -
BTF
Number of units in the width of a layer
The functiongetCode()returns "BTF" for this value
The functiongetName()returns "Number of units in the width of a layer" for this value
The functiongetDescription()returns "Number of units of a product or package which make up the width of a layer in a package, container, pallet, etc." for this value -
BTG
Number of units in the depth of a layer
The functiongetCode()returns "BTG" for this value
The functiongetName()returns "Number of units in the depth of a layer" for this value
The functiongetDescription()returns "Number of units of a product or package which make up the depth of a layer in a package, container, pallet, etc." for this value -
BTH
Nestable percentage
The functiongetCode()returns "BTH" for this value
The functiongetName()returns "Nestable percentage" for this value
The functiongetDescription()returns "Extent expressed as a percentage to which an item can be nested within an identical item, e.g. paper cups." for this value -
BTI
Gross weight including carrier's equipment
The functiongetCode()returns "BTI" for this value
The functiongetName()returns "Gross weight including carrier's equipment" for this value
The functiongetDescription()returns "Weight (mass) of goods including packaging and the carrier's equipment. In this context 'carrier's equipment' means any material resources necessary to facilitate the transport and handling of the goods without having the ability to move by its own propulsion, e.g. pallet, container, etc." for this value -
BTJ
Sugar content
The functiongetCode()returns "BTJ" for this value
The functiongetName()returns "Sugar content" for this value
The functiongetDescription()returns "The rate of sugar." for this value -
BTK
Self-accelerating polymerization temperature (SAPT)
The functiongetCode()returns "BTK" for this value
The functiongetName()returns "Self-accelerating polymerization temperature (SAPT)" for this value
The functiongetDescription()returns "The lowest temperature at which polymerization may occur for a substance as packed for transport." for this value -
BTL
Self-accelerating decomposition temperature (SADT)
The functiongetCode()returns "BTL" for this value
The functiongetName()returns "Self-accelerating decomposition temperature (SADT)" for this value
The functiongetDescription()returns "The lowest temperature at which self-accelerating decomposition may occur for a substance as packed for transport." for this value -
BTM
Control temperature
The functiongetCode()returns "BTM" for this value
The functiongetName()returns "Control temperature" for this value
The functiongetDescription()returns "The controlled transport temperature to avoid decomposition of self-reactive substances and organic peroxides." for this value -
BW
Basis weight
The functiongetCode()returns "BW" for this value
The functiongetName()returns "Basis weight" for this value
The functiongetDescription()returns "The measured basis weight." for this value -
CHN
Change
The functiongetCode()returns "CHN" for this value
The functiongetName()returns "Change" for this value
The functiongetDescription()returns "The measured change." for this value -
CHO
Emergency temperature
The functiongetCode()returns "CHO" for this value
The functiongetName()returns "Emergency temperature" for this value
The functiongetDescription()returns "The temperature at which emergency response is required for self-reactive substances and organic peroxides." for this value -
CM
Colour
The functiongetCode()returns "CM" for this value
The functiongetName()returns "Colour" for this value
The functiongetDescription()returns "The measured colour." for this value -
CT
Contents of package
The functiongetCode()returns "CT" for this value
The functiongetName()returns "Contents of package" for this value
The functiongetDescription()returns "In combination with the other data elements of the actual segment this code indicates the measured content of a package." for this value -
CV
Commercial weight
The functiongetCode()returns "CV" for this value
The functiongetName()returns "Commercial weight" for this value
The functiongetDescription()returns "Item weight considering its maximum possible humidity." for this value -
CZ
Core length
The functiongetCode()returns "CZ" for this value
The functiongetName()returns "Core length" for this value
The functiongetDescription()returns "To specify length of core on which product is to be placed." for this value -
D
Destination weight agreement
The functiongetCode()returns "D" for this value
The functiongetName()returns "Destination weight agreement" for this value
The functiongetDescription()returns "The agreed weight of despatched goods whose weight may change during transport." for this value -
DI
Diameter
The functiongetCode()returns "DI" for this value
The functiongetName()returns "Diameter" for this value
The functiongetDescription()returns "Diameter of an article." for this value -
DL
Delta value L
The functiongetCode()returns "DL" for this value
The functiongetName()returns "Delta value L" for this value
The functiongetDescription()returns "The measured delta value L." for this value -
DN
Density
The functiongetCode()returns "DN" for this value
The functiongetName()returns "Density" for this value
The functiongetDescription()returns "The measured density." for this value -
DP
Depth
The functiongetCode()returns "DP" for this value
The functiongetName()returns "Depth" for this value
The functiongetDescription()returns "The measured depth." for this value -
DR
Denier
The functiongetCode()returns "DR" for this value
The functiongetName()returns "Denier" for this value
The functiongetDescription()returns "The measured fineness of a material." for this value -
DS
Distance between points
The functiongetCode()returns "DS" for this value
The functiongetName()returns "Distance between points" for this value
The functiongetDescription()returns "The measured distance between points." for this value -
DW
Width, boxcar door
The functiongetCode()returns "DW" for this value
The functiongetName()returns "Width, boxcar door" for this value
The functiongetDescription()returns "The measured width of a boxcar door." for this value -
E
Estimated new weight
The functiongetCode()returns "E" for this value
The functiongetName()returns "Estimated new weight" for this value
The functiongetDescription()returns "The measured estimated new weight." for this value -
EA
Elongation
The functiongetCode()returns "EA" for this value
The functiongetName()returns "Elongation" for this value
The functiongetDescription()returns "The measured elongation." for this value -
F
Deficit weight
The functiongetCode()returns "F" for this value
The functiongetName()returns "Deficit weight" for this value
The functiongetDescription()returns "The measured deficit weight." for this value -
FI
Filament count
The functiongetCode()returns "FI" for this value
The functiongetName()returns "Filament count" for this value
The functiongetDescription()returns "Used e.g. in textile, print industries." for this value -
FL
Longitudinal flatness
The functiongetCode()returns "FL" for this value
The functiongetName()returns "Longitudinal flatness" for this value
The functiongetDescription()returns "The measured longitudinal flatness." for this value -
FN
Flatness
The functiongetCode()returns "FN" for this value
The functiongetName()returns "Flatness" for this value
The functiongetDescription()returns "The measured flatness." for this value -
FV
Transverse flatness
The functiongetCode()returns "FV" for this value
The functiongetName()returns "Transverse flatness" for this value
The functiongetDescription()returns "The measured transverse flatness." for this value -
GG
Gauge
The functiongetCode()returns "GG" for this value
The functiongetName()returns "Gauge" for this value
The functiongetDescription()returns "The measured gauge." for this value -
GW
Gross weight, maximum
The functiongetCode()returns "GW" for this value
The functiongetName()returns "Gross weight, maximum" for this value
The functiongetDescription()returns "The measured maximum gross weight." for this value -
HF
Hardness
The functiongetCode()returns "HF" for this value
The functiongetName()returns "Hardness" for this value
The functiongetDescription()returns "The measured hardness." for this value -
HM
Height, maximum
The functiongetCode()returns "HM" for this value
The functiongetName()returns "Height, maximum" for this value
The functiongetDescription()returns "The measured maximum height." for this value -
HT
Height dimension
The functiongetCode()returns "HT" for this value
The functiongetName()returns "Height dimension" for this value
The functiongetDescription()returns "Numeric value of height." for this value -
IB
Impact energy
The functiongetCode()returns "IB" for this value
The functiongetName()returns "Impact energy" for this value
The functiongetDescription()returns "The measured impact energy." for this value -
ID
Inside diameter
The functiongetCode()returns "ID" for this value
The functiongetName()returns "Inside diameter" for this value
The functiongetDescription()returns "The measured inside diameter." for this value -
L
Legal weight
The functiongetCode()returns "L" for this value
The functiongetName()returns "Legal weight" for this value
The functiongetDescription()returns "The measured legal weight." for this value -
LM
Length, maximum
The functiongetCode()returns "LM" for this value
The functiongetName()returns "Length, maximum" for this value
The functiongetDescription()returns "The measured maximum length." for this value -
LN
Length
The functiongetCode()returns "LN" for this value
The functiongetName()returns "Length" for this value
The functiongetDescription()returns "To specify the value of a length dimension." for this value -
LND
Lost end
The functiongetCode()returns "LND" for this value
The functiongetName()returns "Lost end" for this value
The functiongetDescription()returns "The measured lost end." for this value -
M
Minimum weight
The functiongetCode()returns "M" for this value
The functiongetName()returns "Minimum weight" for this value
The functiongetDescription()returns "The measured minimum weight." for this value -
MO
Moisture
The functiongetCode()returns "MO" for this value
The functiongetName()returns "Moisture" for this value
The functiongetDescription()returns "Measurement application is the moisture content of the item." for this value -
MW
Maximum weight
The functiongetCode()returns "MW" for this value
The functiongetName()returns "Maximum weight" for this value
The functiongetDescription()returns "The measured maximum weight." for this value -
N
Actual net weight
The functiongetCode()returns "N" for this value
The functiongetName()returns "Actual net weight" for this value
The functiongetDescription()returns "The actual weight of the goods excluding packaging." for this value -
OD
Outside diameter
The functiongetCode()returns "OD" for this value
The functiongetName()returns "Outside diameter" for this value
The functiongetDescription()returns "The measured outside diameter." for this value -
PRS
Pre stretch
The functiongetCode()returns "PRS" for this value
The functiongetName()returns "Pre stretch" for this value
The functiongetDescription()returns "Measurement identifying the amount an item has been stretched prior to use." for this value -
PTN
Per tonne
The functiongetCode()returns "PTN" for this value
The functiongetName()returns "Per tonne" for this value
The functiongetDescription()returns "A measurement per tonne." for this value -
RA
Relative humidity
The functiongetCode()returns "RA" for this value
The functiongetName()returns "Relative humidity" for this value
The functiongetDescription()returns "The measured relative humidity." for this value -
RF
Resistivity
The functiongetCode()returns "RF" for this value
The functiongetName()returns "Resistivity" for this value
The functiongetDescription()returns "The measured resistivity." for this value -
RJ
Rockwell C
The functiongetCode()returns "RJ" for this value
The functiongetName()returns "Rockwell C" for this value
The functiongetDescription()returns "Hardness in the Rockwell C scale." for this value -
RMW
Ream weight
The functiongetCode()returns "RMW" for this value
The functiongetName()returns "Ream weight" for this value
The functiongetDescription()returns "Measurement indication for paper." for this value -
RP
Reduction of area
The functiongetCode()returns "RP" for this value
The functiongetName()returns "Reduction of area" for this value
The functiongetDescription()returns "The measured reduction of area." for this value -
RUN
Run (process)
The functiongetCode()returns "RUN" for this value
The functiongetName()returns "Run (process)" for this value
The functiongetDescription()returns "The measured run (process)." for this value -
RY
Ratio
The functiongetCode()returns "RY" for this value
The functiongetName()returns "Ratio" for this value
The functiongetDescription()returns "The measured ratio." for this value -
SQ
Shipped quantity
The functiongetCode()returns "SQ" for this value
The functiongetName()returns "Shipped quantity" for this value
The functiongetDescription()returns "The measured shipped quantity." for this value -
T
Tare weight
The functiongetCode()returns "T" for this value
The functiongetName()returns "Tare weight" for this value
The functiongetDescription()returns "Weight excluding goods and loose accessories." for this value -
TC
Temperature
The functiongetCode()returns "TC" for this value
The functiongetName()returns "Temperature" for this value
The functiongetDescription()returns "A measurement in relation to temperature." for this value -
TH
Thickness
The functiongetCode()returns "TH" for this value
The functiongetName()returns "Thickness" for this value
The functiongetDescription()returns "The measured thickness." for this value -
TN
Time period
The functiongetCode()returns "TN" for this value
The functiongetName()returns "Time period" for this value
The functiongetDescription()returns "Measurement of a specific length of time." for this value -
TT
Time
The functiongetCode()returns "TT" for this value
The functiongetName()returns "Time" for this value
The functiongetDescription()returns "The measured time." for this value -
VGM
Transport equipment verified gross mass (weight)
The functiongetCode()returns "VGM" for this value
The functiongetName()returns "Transport equipment verified gross mass (weight)" for this value
The functiongetDescription()returns "The gross mass (weight) of the transport equipment verified according to SOLAS Chapter VI, Regulation 2, paragraphs 4-6." for this value -
VH
Height, van door
The functiongetCode()returns "VH" for this value
The functiongetName()returns "Height, van door" for this value
The functiongetDescription()returns "The height of the door of a van or container." for this value -
VW
Width, van door
The functiongetCode()returns "VW" for this value
The functiongetName()returns "Width, van door" for this value
The functiongetDescription()returns "The width of the door of a van or container." for this value -
WA
Weight per unit of area
The functiongetCode()returns "WA" for this value
The functiongetName()returns "Weight per unit of area" for this value
The functiongetDescription()returns "The weight per unit of an area." for this value -
WD
Width dimension
The functiongetCode()returns "WD" for this value
The functiongetName()returns "Width dimension" for this value
The functiongetDescription()returns "Numeric value of width." for this value -
WM
Width, maximum
The functiongetCode()returns "WM" for this value
The functiongetName()returns "Width, maximum" for this value
The functiongetDescription()returns "The maximum distance from side to side." for this value -
WU
Weight per unit of length
The functiongetCode()returns "WU" for this value
The functiongetName()returns "Weight per unit of length" for this value
The functiongetDescription()returns "The weight per unit of length." for this value -
XH
Side height, flat bed with removable sides
The functiongetCode()returns "XH" for this value
The functiongetName()returns "Side height, flat bed with removable sides" for this value
The functiongetDescription()returns "The height of the removable sides of a flat bed truck." for this value -
XQ
Squareness
The functiongetCode()returns "XQ" for this value
The functiongetName()returns "Squareness" for this value
The functiongetDescription()returns "The measured squareness." for this value -
XZ
Spool size
The functiongetCode()returns "XZ" for this value
The functiongetName()returns "Spool size" for this value
The functiongetDescription()returns "The measured spool size." for this value -
YS
Yield stress
The functiongetCode()returns "YS" for this value
The functiongetName()returns "Yield stress" for this value
The functiongetDescription()returns "The measured yield stress." for this value -
ZAL
Aluminium
The functiongetCode()returns "ZAL" for this value
The functiongetName()returns "Aluminium" for this value
The functiongetDescription()returns "The measured chemical element aluminium." for this value -
ZAS
Arsenic
The functiongetCode()returns "ZAS" for this value
The functiongetName()returns "Arsenic" for this value
The functiongetDescription()returns "The measured chemical element arsenic." for this value -
ZB
Boron
The functiongetCode()returns "ZB" for this value
The functiongetName()returns "Boron" for this value
The functiongetDescription()returns "The measured chemical element boron." for this value -
ZBI
Bismuth
The functiongetCode()returns "ZBI" for this value
The functiongetName()returns "Bismuth" for this value
The functiongetDescription()returns "The measured chemical element bismuth." for this value -
ZC
Carbon
The functiongetCode()returns "ZC" for this value
The functiongetName()returns "Carbon" for this value
The functiongetDescription()returns "The measured chemical element carbon." for this value -
ZCA
Calcium
The functiongetCode()returns "ZCA" for this value
The functiongetName()returns "Calcium" for this value
The functiongetDescription()returns "The measured chemical element calcium." for this value -
ZCB
Columbium
The functiongetCode()returns "ZCB" for this value
The functiongetName()returns "Columbium" for this value
The functiongetDescription()returns "The measured chemical element columbium." for this value -
ZCE
Cerium
The functiongetCode()returns "ZCE" for this value
The functiongetName()returns "Cerium" for this value
The functiongetDescription()returns "The measured chemical element cerium." for this value -
ZCL
Chlorine
The functiongetCode()returns "ZCL" for this value
The functiongetName()returns "Chlorine" for this value
The functiongetDescription()returns "The measured chemical element chlorine." for this value -
ZCO
Cobalt
The functiongetCode()returns "ZCO" for this value
The functiongetName()returns "Cobalt" for this value
The functiongetDescription()returns "The measured chemical element cobalt." for this value -
ZCR
Chromium
The functiongetCode()returns "ZCR" for this value
The functiongetName()returns "Chromium" for this value
The functiongetDescription()returns "The measured chemical element chromium." for this value -
ZCU
Copper
The functiongetCode()returns "ZCU" for this value
The functiongetName()returns "Copper" for this value
The functiongetDescription()returns "The measured chemical element copper." for this value -
ZFE
Iron
The functiongetCode()returns "ZFE" for this value
The functiongetName()returns "Iron" for this value
The functiongetDescription()returns "The measured chemical element iron." for this value -
ZFS
Iron plus silicon
The functiongetCode()returns "ZFS" for this value
The functiongetName()returns "Iron plus silicon" for this value
The functiongetDescription()returns "The measured substance iron plus silicon." for this value -
ZGE
Germanium
The functiongetCode()returns "ZGE" for this value
The functiongetName()returns "Germanium" for this value
The functiongetDescription()returns "The measured chemical element germanium." for this value -
ZH
Hydrogen
The functiongetCode()returns "ZH" for this value
The functiongetName()returns "Hydrogen" for this value
The functiongetDescription()returns "The measured chemical element hydrogen." for this value -
ZK
Potassium
The functiongetCode()returns "ZK" for this value
The functiongetName()returns "Potassium" for this value
The functiongetDescription()returns "The measured chemical element potassium." for this value -
ZMG
Magnesium
The functiongetCode()returns "ZMG" for this value
The functiongetName()returns "Magnesium" for this value
The functiongetDescription()returns "The measured chemical element magnesium." for this value -
ZMN
Manganese
The functiongetCode()returns "ZMN" for this value
The functiongetName()returns "Manganese" for this value
The functiongetDescription()returns "The measured chemical element manganese." for this value -
ZMO
Molybdenum
The functiongetCode()returns "ZMO" for this value
The functiongetName()returns "Molybdenum" for this value
The functiongetDescription()returns "The measured chemical element molybdenum." for this value -
ZN
Nitrogen
The functiongetCode()returns "ZN" for this value
The functiongetName()returns "Nitrogen" for this value
The functiongetDescription()returns "The measured chemical element nitrogen." for this value -
ZNA
Sodium
The functiongetCode()returns "ZNA" for this value
The functiongetName()returns "Sodium" for this value
The functiongetDescription()returns "The measured chemical element sodium." for this value -
ZNB
Niobium
The functiongetCode()returns "ZNB" for this value
The functiongetName()returns "Niobium" for this value
The functiongetDescription()returns "The chemical element niobium." for this value -
ZNI
Nickel
The functiongetCode()returns "ZNI" for this value
The functiongetName()returns "Nickel" for this value
The functiongetDescription()returns "The measured chemical element nickel." for this value -
ZO
Oxygen
The functiongetCode()returns "ZO" for this value
The functiongetName()returns "Oxygen" for this value
The functiongetDescription()returns "The measured chemical element oxygen." for this value -
ZP
Phosphorus
The functiongetCode()returns "ZP" for this value
The functiongetName()returns "Phosphorus" for this value
The functiongetDescription()returns "The measured chemical element phosphorus." for this value -
ZPB
Lead
The functiongetCode()returns "ZPB" for this value
The functiongetName()returns "Lead" for this value
The functiongetDescription()returns "The measured chemical element lead." for this value -
ZS
Sulphur
The functiongetCode()returns "ZS" for this value
The functiongetName()returns "Sulphur" for this value
The functiongetDescription()returns "The measured chemical element sulphur." for this value -
ZSB
Antimony
The functiongetCode()returns "ZSB" for this value
The functiongetName()returns "Antimony" for this value
The functiongetDescription()returns "The measured chemical element antimony." for this value -
ZSE
Selenium
The functiongetCode()returns "ZSE" for this value
The functiongetName()returns "Selenium" for this value
The functiongetDescription()returns "The measured chemical element selenium." for this value -
ZSI
Silicon
The functiongetCode()returns "ZSI" for this value
The functiongetName()returns "Silicon" for this value
The functiongetDescription()returns "The measured chemical element silicon." for this value -
ZSL
Silicium oxyd
The functiongetCode()returns "ZSL" for this value
The functiongetName()returns "Silicium oxyd" for this value
The functiongetDescription()returns "The measured substance silicium oxyd." for this value -
ZSN
Tin
The functiongetCode()returns "ZSN" for this value
The functiongetName()returns "Tin" for this value
The functiongetDescription()returns "The measured chemical element tin." for this value -
ZTA
Tantalium
The functiongetCode()returns "ZTA" for this value
The functiongetName()returns "Tantalium" for this value
The functiongetDescription()returns "The measured chemical element tantalium." for this value -
ZTE
Tellurium
The functiongetCode()returns "ZTE" for this value
The functiongetName()returns "Tellurium" for this value
The functiongetDescription()returns "The measured chemical element tellurium." for this value -
ZTI
Titanium
The functiongetCode()returns "ZTI" for this value
The functiongetName()returns "Titanium" for this value
The functiongetDescription()returns "The measured chemical element titanium." for this value -
ZV
Vanadium
The functiongetCode()returns "ZV" for this value
The functiongetName()returns "Vanadium" for this value
The functiongetDescription()returns "The measured chemical element vanadium." for this value -
ZW
Tungsten
The functiongetCode()returns "ZW" for this value
The functiongetName()returns "Tungsten" for this value
The functiongetDescription()returns "The measured chemical element tungsten." for this value -
ZWA
Waste content
The functiongetCode()returns "ZWA" for this value
The functiongetName()returns "Waste content" for this value
The functiongetDescription()returns "The measured waste content." for this value -
ZZN
Zinc
The functiongetCode()returns "ZZN" for this value
The functiongetName()returns "Zinc" for this value
The functiongetDescription()returns "The measured chemical element zinc." for this value -
ZZR
Zirconium
The functiongetCode()returns "ZZR" for this value
The functiongetName()returns "Zirconium" for this value
The functiongetDescription()returns "The measured chemical element zirconium." for this value -
ZZZ
Mutually defined
The functiongetCode()returns "ZZZ" for this value
The functiongetName()returns "Mutually defined" for this value
The functiongetDescription()returns "A code assigned within a code list to be used on an interim basis and as defined among trading partners until a precise code can be assigned to the code list." for this value -
BEST_BEFORE_DATE
Best before date
The functiongetCode()returns "BEST_BEFORE_DATE" for this value
The functiongetName()returns "Best before date" for this value
The functiongetDescription()returns "" for this value -
COLOR_TEXT
Colour as text
The functiongetCode()returns "COLOR_TEXT" for this value
The functiongetName()returns "Colour as text" for this value
The functiongetDescription()returns "" for this value -
COMMISSION
Commission indicator
The functiongetCode()returns "COMMISSION" for this value
The functiongetName()returns "Commission indicator" for this value
The functiongetDescription()returns "true / false" for this value -
DEPOSIT_SYSTEM
Deposit system
The functiongetCode()returns "DEPOSIT_SYSTEM" for this value
The functiongetName()returns "Deposit system" for this value
The functiongetDescription()returns "Permitted values: DISPOSABLE RETURNABLE" for this value -
DEPOSIT_TYPE
Deposit type
The functiongetCode()returns "DEPOSIT_TYPE" for this value
The functiongetName()returns "Deposit type" for this value
The functiongetDescription()returns "Permitted values: PRODUCT_PACKAGING TRANSPORT_EQUIPMENT" for this value -
ENERGY_CLASS
Energy efficiency class
The functiongetCode()returns "ENERGY_CLASS" for this value
The functiongetName()returns "Energy efficiency class" for this value
The functiongetDescription()returns "" for this value -
EXPIRATION_DATE
Expiration date
The functiongetCode()returns "EXPIRATION_DATE" for this value
The functiongetName()returns "Expiration date" for this value
The functiongetDescription()returns "" for this value -
FEE
Fee indicator
The functiongetCode()returns "FEE" for this value
The functiongetName()returns "Fee indicator" for this value
The functiongetDescription()returns "true = item is a fee" for this value -
KIND_OF_ARTICLE
Type of article
The functiongetCode()returns "KIND_OF_ARTICLE" for this value
The functiongetName()returns "Type of article" for this value
The functiongetDescription()returns "Allowed values: GOODS OTHER_SERVICES" for this value -
MATERIAL
Material of the product
The functiongetCode()returns "MATERIAL" for this value
The functiongetName()returns "Material of the product" for this value
The functiongetDescription()returns "" for this value -
METER_LOCATION
Metering point designation, e.g. for electricity or gas
The functiongetCode()returns "METER_LOCATION" for this value
The functiongetName()returns "Metering point designation, e.g. for electricity or gas" for this value
The functiongetDescription()returns "" for this value -
METER_NUMBER
Meter number, e.g. for electricity or gas
The functiongetCode()returns "METER_NUMBER" for this value
The functiongetName()returns "Meter number, e.g. for electricity or gas" for this value
The functiongetDescription()returns "" for this value -
ORGANIC_CONTROL_BODY
Organic control body number
The functiongetCode()returns "ORGANIC_CONTROL_BODY" for this value
The functiongetName()returns "Organic control body number" for this value
The functiongetDescription()returns "" for this value -
PACKAGING_MATERIAL
Packaging material
The functiongetCode()returns "PACKAGING_MATERIAL" for this value
The functiongetName()returns "Packaging material" for this value
The functiongetDescription()returns "" for this value -
PACKAGING_TYPE
Type of packaging (code)
The functiongetCode()returns "PACKAGING_TYPE" for this value
The functiongetName()returns "Type of packaging (code)" for this value
The functiongetDescription()returns "Type of packaging in coded form. The packaging units from Rec 20 / Rec 21 are used as the code list. Example XBO=bottle" for this value -
PROMOTIONAL_VARIANT
Number of the action variant
The functiongetCode()returns "PROMOTIONAL_VARIANT" for this value
The functiongetName()returns "Number of the action variant" for this value
The functiongetDescription()returns "" for this value -
SEAL_NUMBER
Seal number
The functiongetCode()returns "SEAL_NUMBER" for this value
The functiongetName()returns "Seal number" for this value
The functiongetDescription()returns "" for this value -
SIZE_CODE
Size code
The functiongetCode()returns "SIZE_CODE" for this value
The functiongetName()returns "Size code" for this value
The functiongetDescription()returns "Size information in coded form" for this value -
SIZE_TEXT
Size designation
The functiongetCode()returns "SIZE_TEXT" for this value
The functiongetName()returns "Size designation" for this value
The functiongetDescription()returns "Size specifications in text form" for this value -
TRADING_UNIT
Type of trading unit
The functiongetCode()returns "TRADING_UNIT" for this value
The functiongetName()returns "Type of trading unit" for this value
The functiongetDescription()returns "Permitted values: MIXED_ASSORTMENT = Assortment UNMIXED_UNIT = Container" for this value -
WASTE_CODE
Waste code (EWC)
The functiongetCode()returns "WASTE_CODE" for this value
The functiongetName()returns "Waste code (EWC)" for this value
The functiongetDescription()returns "Waste code according to the European Waste Catalogue (EWC)" for this value -
WASTE_FRACTION
Waste fraction
The functiongetCode()returns "WASTE_FRACTION" for this value
The functiongetName()returns "Waste fraction" for this value
The functiongetDescription()returns "" for this value -
WEEE_NUMBER
WEEE registration number
The functiongetCode()returns "WEEE_NUMBER" for this value
The functiongetName()returns "WEEE registration number" for this value
The functiongetDescription()returns "WEEE registration number of the manufacturer of the product" for this value -
CustomEntry1
Custom entry whose member "code" gets updated to "value" on calls tofromString(String value) -
CustomEntry2
Custom entry whose member "code" gets updated to "value" on calls tofromString(String value) -
CustomEntry3
Custom entry whose member "code" gets updated to "value" on calls tofromString(String value) -
CustomEntry4
Custom entry whose member "code" gets updated to "value" on calls tofromString(String value) -
CustomEntry5
Custom entry whose member "code" gets updated to "value" on calls tofromString(String value) -
CustomEntry6
Custom entry whose member "code" gets updated to "value" on calls tofromString(String value) -
CustomEntry7
Custom entry whose member "code" gets updated to "value" on calls tofromString(String value) -
CustomEntry8
Custom entry whose member "code" gets updated to "value" on calls tofromString(String value) -
CustomEntry9
Custom entry whose member "code" gets updated to "value" on calls tofromString(String value) -
CustomEntry10
Custom entry whose member "code" gets updated to "value" on calls tofromString(String value)
-
-
Method Details
-
values
Returns an array containing the constants of this enum class, in the order they are declared.- Returns:
- an array containing the constants of this enum class, in the order they are declared
-
valueOf
Returns the enum constant of this class with the specified name. The string must match exactly an identifier used to declare an enum constant in this class. (Extraneous whitespace characters are not permitted.)- Parameters:
name- the name of the enum constant to be returned.- Returns:
- the enum constant with the specified name
- Throws:
IllegalArgumentException- if this enum class has no constant with the specified nameNullPointerException- if the argument is null
-
getCode
-
getName
-
getDescription
-
toString
Returns a string representation of the Characteristic.- Overrides:
toStringin classEnum<Codes.Characteristic>- Returns:
- a string representation of the Characteristic.
-
fromString
Convert a String to a Characteristic.
Throws aIllegalArgumentExceptionif the value doesn't exist unless the system property "facturx.laxenums" is set to true. In the latter case, a custom value is returned if available.- Returns:
- a Characteristic that represents the String.
-
isNativeValue
Tests ifvalueOf(value)would return a non custom enum value- Returns:
- true if if
valueOf(value)would return a non custom enum value
-