com.WebServiceEngine.Flush

Forces the Web Service engine to immediately flush the response of the web service operation.

Syntax

com.WebServiceEngine.Flush()
  RETURNS INTEGER

Usage

The com.WebServiceEngine.flush() class method allows for the return of the response inside a high-level web service operation, before the end of the web service function.

When this method is used, any other web operation output parameter changes are ignored.

The status returned by the method provides information about the execution of the last web operation. A return status of zero means OK. For a complete list of error codes, see Error codes of com.WebServicesEngine
Note:

The return status of the com.WebServiceEngine.flush() method has the same meaning as a status returned by com.WebServiceEngine.ProcessServices(), with the additional status code -32, meaning that the flush method was called outside of a web operation execution context.

Note:

com.WebServiceEngine.ProcessServices() and com.WebServiceEngine.HandleRequest() can return the status code of -31, meaning that the flush function has been called in the last executed web operation.

Example

In this code example, the flush() method is used to force the response of the web service operation.
DEFINE echoBoolean_in, echoBoolean_out RECORD
    a_boolean  BOOLEAN ATTRIBUTES(XMLName="Boolean")
  END RECORD

MAIN
  DEFINE ret INTEGER
  ...
  WHILE true
    LET ret = com.WebServiceEngine.ProcessServices(-1)
    CASE ret
      WHEN 0
        DISPLAY "Request automatically processed."
      WHEN -31
        DISPLAY "Operation has been flushed."
      ...
  END WHILE
  ...
END MAIN

FUNCTION echoBoolean()
  DEFINE ret INTEGER
  -- Assign output parameter with input parameter
  LET echoBoolean_out.a_boolean = echoBoolean_in.a_boolean
  -- Immediate flush of web operation
  LET ret = com.WebServiceEngine.flush()
  IF ret != 0 THEN
     DISPLAY "ERROR Code : ",ret
     EXIT PROGRAM (1)
  END IF
  -- Changing the output parameters after flush() would have no effect.
END FUNCTION