Print a report without a driver using PJL

Use the Printer Job Language (PJL) to print documents without the need to install drivers.

Printer Job Language (PJL) is a method for switching printer languages and for reading printer status. PJL allows you to configure your printer for server-side silent printing on network Postscript printers.

Advantages of PJL printing

  • Does not require driver installation.
  • Full streaming available.
  • Better support for configuration properties.
  • Full support for printer-specific properties.
  • The software and the printer communicate directly with each other, which makes debugging easier.

Potential issues with PJL printing

PJL printing bypasses the system spooler and occurs synchronously with the printer. Therefore, long print jobs can block the production process on printers with limited memory. You can avoid this in interactive applications by executing the printing job in a separate process or thread.

In case of printer failure, such as a paper jam, the application must manage reprinting. You can cause the printer byte stream to be written to a different destination, and the file in the specified destination is completed even in case of error. This file contains all the PJL commands so that the job can be restarted by opening a client socket connection at port 9100 to the printer and then sent the contents of this file.

Printer support

The printer must be reachable over the network at TCP port 9100, and support both the PJL and the Postscript language. The printer capabilities must be listed using the PrinterInfo utility, which can also be used to query a specific printer for a list of its PJL environment variables and permissible values.

PJL printer name syntax

PJL printers are identified by their network addresses. A PJL printer is identified by a printer name having the following syntax:

pjl:[password]:host

Examples without password: 

pjl:FrontDesk
pjl:10.0.1.052

Example with password: 

pjl:1234:FrontDesk

You can also use the PrinterInfo tool to specify the PJL printer network addresses and other printer names. On the command line, enter printerinfo pjl:printername or printerinfo pjl:printerIP. For example: 

printerinfo pjl:FrontDesk