Genero Report Engine error messages

A list of Genero Report Engine (GRE) error messages. For messages that are not self-explanatory, additional information is provided.

Table 1. Error messages for the Package layoutnode
Number Description
GS-31200 Internal error: Invalid bar code type

Contact support.

GS-31201 Bar code type "%1": invalid codeValue "%2". Value is not an integer

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31202 Bar code type "%1": invalid codeValue "%2". The value needs to be %3 digits long

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31203 Bar code type "%1": invalid checksum %2 in %3. Value should be %4

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31204 DocumentStructureException: failed to add text node (cause=%1).
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31205 DocumentStructureException: failed to finalize text node (cause=%1).
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31206 Bar code type "%1": invalid codeValue "%2". Value is not an integer
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31207 Bar code type "%1": invalid codeValue "%2". The value needs to be %3 digits long
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31208 Bar code type "%1": invalid codeValue "%2". First digit must be either '0' or '1'
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31209 Internal error: Wrong initializer for digit "%1"
GS-31210 Bar code type "Code128": invalid codeValue "%1". Value cannot be parsed as comma separated character list
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31211 Bar code type "Code128": invalid start codeValue "%1". Sequence must start with STARTA, STARTB or STARTC
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31212 Bar code type "%1": invalid checksum "%2" in %3. Value should be "%4"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31213 Bar code type "Code128": invalid character "%1" in codeValue "%2". Code is not available in the character set %3.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31214 Bar code type "%1": invalid codeValue "%2". Value is not an integer
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31215 Bar code type "%1": invalid codeValue "%2". The value needs to be %3 digits long
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31216 Bar code type "%1": invalid checksum %2 in %3. Value should be %4
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31217 Bar code type "%1": invalid number of digits %2. Value must be a multiple of 2.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31218 Bar code type "%1": invalid value for noCheckDigits %2. Value must be either 1 or 2.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31219 Bar code type "%1": invalid codeValue "%2". Value may contain only the digits 0-9 and the '-' character.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31220 Bar code type "%1": invalid codeValue "%2". The value needs to be %3 digits long

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31221 Bar code type "%1": invalid K checksum %2 in %3. Value should be '%4'
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31222 Bar code type "%1": invalid C checksum %2 in %3. Value should be '%4'
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31224 Bar code type "%1": invalid character '%2' in codeValue "%3".
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31225 Bar code type "%1": invalid codeValue "%2". The value needs to be %3 digits long
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31226 Bar code type "%1": invalid checksum %2 in %3. Value should be %4
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31227 Bar code type "Code 39 Extended": invalid character "%1" in codeValue "%2".
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31228 Bar code type "Code 39 Extended": invalid codeValue "%1". Value cannot be parsed as comma separated character list
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31229 Bar code type "Code 39 Extended": invalid character "%1" in codeValue "%2".
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31230 Bar code type "%1": invalid codeValue "%2". Value is not an integer
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31231 Bar code type "%1": invalid codeValue "%2". The value needs to be 9 digits long
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31232 Bar code type "%1": invalid checksum %2 in %3. Value should be %4
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31233 Internal error: Wrong initializer for digit "%1"
GS-31234 Bar code type "%1": invalid value for controlCharacters %2. Value must be a four character string.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31235 Bar code type "%1": invalid value for noCheckDigits %2. Value must be either 1 or 2.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31236 Bar code type "%1": invalid character '%2' in codeValue "%3".
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31237 Bar code type "%1": invalid codeValue "%2". The value needs to be %3 digits long
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31238 Bar code type "%1": invalid K checksum %2 in %3. Value should be '%4'
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31239 Bar code type "%1": invalid C checksum %2 in %3. Value should be '%4'
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31241 Bar code type "Code 93 Extended": invalid codeValue "%1". Value cannot be parsed as comma separated character list
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31242 Bar code type "Code 93 Extended": invalid character "%1" in codeValue "%2".
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31243 Bar code type "%1": invalid character '%2' in codeValue "%3".
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31244 Bar code type "%1": invalid codeValue "%2". The value needs to be %3 digits long
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31245 Bar code type "%1": invalid codeValue "%2". The first character of the value needs to be either 'a', 'b', 'c' or 'd'
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31246 Bar code type "%1": invalid codeValue "%2". The last character of the value needs to be either 't', 'n', '*' or 'e'
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31247 Bar code type "%1": invalid codeValue "%2". The character '%3' may not be used within the value
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31248 Bar code type "%1": invalid checksum %2 in %3. Value should be '%4'
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31249 Internal error: Codabar 18: invalid check type
GS-31250 Bar code type "%1": invalid codeValue "%2". The last character of the value needs to be either 'a', 'b', 'c' or 'd'
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31251 Internal error: Codabar 2: invalid check type
GS-31252 Bar code type "%1": expected text to follow '\' at end of "codeValue" attribute
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31253 Bar code type "%1": expected three octal digits to follow '\' in "codeValue" attribute at position %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31254 Bar code type "%1": expected octal digit in "codeValue" attribute at position %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31257 Bar code type "%1": code data too long (val=%2), max=928
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31258 Bar code type "%1": invalid errorCorrectionDegree "%2". Value must between 0 and 8.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31259 Bar code type "%1": invalid value for lines "%2". Value must be a value between 1 and 90.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31260 Bar code type "%1": invalid value for lines "%2". Value causes illegal value for dataSymbolsPerLine of %3 which must be a value between 1 and 30.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31261 Bar code type "%1": invalid dataSymbolsPerLine "%2". Value must between 1 and 30.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31262 Bar code type "%1": invalid value for dataSymbolsPerLine "%2". Value causes illegal value for lines of %3 which must be a value between 1 and 90.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31264 Bar code type "%1": value for lines "%2" and dataSymbolsPerLine "%3" is to small to hold data of %4. The product must be at least %5
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31265 Bar code type "%1": value for additionalPaddingLines "%2" causes the data lines to exceed the maximum value of 90 lines
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31266 Bar code type "%1": encoding error: data needs to end with a latch to ASCII encodation
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31267 Bar code type "data-matrix": invalid rawCodeValue "%1". Value cannot be parsed as comma separated character list

For more information, see data-matrix bar code type.

GS-31268 Character '%1' cannot be encoded since it is not available in the code page ISO-8859-1.

Error message and resolution should be self-explanatory.

GS-31269 Datamatrix "Shifted ASCII" encoding: Character '%1' not allowed.

For more information, see data-matrix bar code type.

GS-31270 Datamatrix "Basic ASCII" encoding: Character '%1' not allowed.

For more information, see data-matrix bar code type.

GS-31271 Datamatrix "Shifted ASCII" encoding: Unknown encoding symbol "%1".

For more information, see data-matrix bar code type.

GS-31272 Datamatrix "Basic ASCII" encoding: Unknown encoding symbol "%1".

For more information, see data-matrix bar code type.

GS-31273 Datamatrix "C40 (basic set)" encoding: Character '%1' not allowed.

For more information, see data-matrix bar code type.

GS-31274 Datamatrix "C40 (basic set)" encoding: Illegal position of "STARTASCII" symbol.

For more information, see data-matrix bar code type.

GS-31275 Datamatrix "C40 (basic set)" encoding: Unknown encoding symbol "%1".

For more information, see data-matrix bar code type.

GS-31276 Datamatrix "C40 (set 1)" encoding: Unknown encoding symbol "%1".

For more information, see data-matrix bar code type.

GS-31277 Datamatrix "C40 (set 2)" encoding: Character '%1' not allowed.

For more information, see data-matrix bar code type.

GS-31278 Datamatrix "C40 (set 2)" encoding: Unknown encoding symbol "%1".

For more information, see data-matrix bar code type.

GS-31279 Datamatrix "C40 (set 3)" encoding: Character '%1' not allowed.

For more information, see data-matrix bar code type.

GS-31280 Datamatrix "C40 (set 3)" encoding: Unknown encoding symbol "%1".

For more information, see data-matrix bar code type.

GS-31281 Datamatrix "C40" encoding: Encountered non data character as last character at the end of symbol space.

For more information, see data-matrix bar code type.

GS-31282 Datamatrix "C40" encoding: Encoded data exceeds maximum of 1558 bytes

For more information, see data-matrix bar code type.

GS-31284 Datamatrix "C40" encoding: Encountered non data character as last character at the end of symbol space.

For more information, see data-matrix bar code type.

GS-31285 Datamatrix "BASE 256" encoding: failed to parse "%1" as byte value.

For more information, see data-matrix bar code type.

GS-31286 Datamatrix "BASE 256" encoding: failed to parse "%1" as byte value (value is outside of the range 0-255).

For more information, see data-matrix bar code type.

GS-31287 Datamatrix "ANSI X11" encoding: Character '%1' not allowed.

For more information, see data-matrix bar code type.

GS-31288 Datamatrix "ANSI X11" encoding: Illegal position of "STARTASCII" symbol.

For more information, see data-matrix bar code type.

GS-31289 Datamatrix "ANSI X12" encoding: Unknown encoding symbol "%1".

For more information, see data-matrix bar code type.

GS-31290 Datamatrix "ANSI X12" encoding: Invalid number of encoded codewords (%1). The number must be a multiple of 3

For more information, see data-matrix bar code type.

GS-31291 Datamatrix "EDIFIACT" encoding: Character '%1' not allowed.

For more information, see data-matrix bar code type.

GS-31292 Datamatrix "EDIFACT" encoding: Illegal position of "STARTASCII" symbol.

For more information, see data-matrix bar code type.

GS-31293 Datamatrix "EDIFACT" encoding: Unknown encoding symbol "%1".

For more information, see data-matrix bar code type.

GS-31294 Datamatrix "EDIFACT" encoding: Invalid number of encoded codewords (%1). The number must either be a multiple of 4 or terminated by a STARTASCII latch.

For more information, see data-matrix bar code type.

GS-31295 Code value too long

Error message and resolution should be self-explanatory.

GS-31296 Invalid number of arguments in gradient paint specification (Required are x1, y1, color1, x2, y2, color2, cyclic)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31297 Failed to parse PXML x expression value %1 from the gradientPaint initializer %2. Parse Error:%3
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31298 Failed to parse PXML y expression value %1 from the gradientPaint initializer %2. Parse Error:%3
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31299 Failed to parse PXML color value %1 from the gradientPaint initializer %2. Parse Error:%3
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31300 Failed to parse boolean value "cyclic" from the gradientPaint initializer %1. Parse Error:%2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31301 Invalid command "%1" in path "%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31302 Unknown command "%1" in path "%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31303 Number of items in xyList not a multiple of 2 (value=%1 count=%2

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31304 Must have same number of values as row titles multiplied by column titles . Have %1 values and %2 values

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31305 Internal error: Invalid chart type
GS-31306 Syntax error int PXML font size expression (%1)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31307 Failed to parse PXML fontsize expression "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31308 Decimal format is not available for this input locale
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31309 Decimal format is not available for this output locale
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31310 Failed to create HTML view (cause=%1:%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31311 Failed to load image from data (cause=%1)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31312 Unsupported image format in data URL "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31313 Unsupported image format loading image from URL "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31314 Failed to load SVG document from file "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31315 Failed to load image from file "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31316 Unsupported image format loading image from file "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31317 Failed to load image (cause="%1")
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31318 Can't find resource "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31319 Failed to load SVG document from resource URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31320 Failed to load image from resource URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31321 Failed to load "Base-64" encoded SVG document from data URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31322 Failed to load SVG document from data URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31323 Syntax error in data URL "%1" (Failed to locate delimiter ',')
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31324 Unsupported encoding in data URL "%1" (Failed to find ";base64")
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31325 Incomplete data URL "%1" (Data is missing)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31326 Failed to load image from data URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31327 Failed to load image from URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31328 Internal error: GrabPrintable::getFontRenderContext() returned null
GS-31329 Invalid "anchorX" PXML expression value %1 computed from expression "%1" (must yield a value between 0 and 1))
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31330 Invalid "anchorY" PXML expression value %1 computed from expression "%1" (must yield a value between 0 and 1))
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31331 Invalid font style value "%1" in list "%2" (must be one of: "plain", "italic" or "bold"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31332 Failed to parse font size percent expression %1 (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31333 The empty string is not allowed as PXML color expression

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31334 Failed to parse PXML color expression "%1" (must be a '#' followed by an integer in hex notation) (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31335 Invalid port "%1" value
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31336 invalid value for lowWaterMark (must be integer >= 0) val=%1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31337 invalid value for highWaterMark (must be negative or greater than lowWaterMark) lowWaterMark=%1 highWaterMark=%2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31338 SAXException: failed to initialize (cause=%1).
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31339 Timeout: Page was not consumed within %1 milliseconds

Error message and resolution should be self-explanatory.

GS-31340 SAXException: failed to create page (cause=%1).
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31341 SAXException: failed to finish document (cause=%1).
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31342 Internal error: Page not in map
GS-31343 IOException: failed to transform memory queue into disk queue (cause=%1).
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31344 IOException: failed to write page to disk queue (cause=%1).
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31345 IOException: failed to flush queue to disk (cause=%1).
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31346 Internal error: %1::eventInitializedChild() called for a cloned LayoutNode
GS-31347 Nodes attached to named ports may not be self placing
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31348 Node order violation: Node has "section" property set to %1 but it is preceded by a node not having the property set. Repair by moving this node "before" any nodes that do not have the property defined.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31349 Internal error: cannot propagate, parent==null||parent not instanceof LayoutNode
GS-31350 Internal error: have unitializedChild when cloning
GS-31351 Internal error: %1::attachPortedChild() invalid port. Port=%2
GS-31352 The "roundingMode" attribute is not supported on this platform (requires Java version 1.6 or higher).
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31353 Failed to parse value "%1" using the specified input format (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31354 Failed to format field value "%1" using format "%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31355 Invalid page number format "%1" (must be one of : "arabic","lowerroman","roman" or "upperroman"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31356 Illegal argument value "%1" as second parameter in call to the PXML function format(). Valid values are ARABIC, LOWERROMAN and UPPERROMAN

For further information, see Defining PXML expressions.

GS-31357 Internal error: getStringReturnValue called on function format. The function returns a string value
GS-31358 Internal error: getParameterType called on function %1. The function takes no parameters
GS-31359 Internal error: pushString called on function %1. The function takes no parameters
GS-31360 Internal error: pushNumeric called on function %1. The function takes no parameters
GS-31361 Internal error: getStringReturnValue called on function %1. The function returns a numeric value
GS-31362 Internal error: pushString called on function %1. The function takes only one string parameter
GS-31363 Internal error: getStringReturnValue called on function %1. The function returns a numeric value
GS-31364 Number of sizes and titles differ (Have %1 sizes and %2 titles)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31365 Internal error: Invalid pie graph type
GS-31366 Internal error: %1::eventNewChild() called for a cloned LayoutNode
GS-31367 Internal error: %1::eventInitializedChild() called for a cloned LayoutNode
GS-31368 Internal error: cannot propagate, parent==null||parent not instanceof LayoutNode
GS-31369 Internal error: have unitializedChild when cloning
GS-31370 Loading SVG document from url %1 failed (cause=%2)

Error message and resolution should be self-explanatory.

GS-31371 Loading SVG document from reader failed (cause=%1)

Error message and resolution should be self-explanatory.

GS-31372 Loading SVG document from input stream failed (cause=%1)

Error message and resolution should be self-explanatory.

GS-31373 Invalid command in transformInstructions attribute ("%1")
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31374 not enough arguments to %1 command in transform attribute. Required are %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31375 Wrong number of matrix values in %1 attribute (%2) required are 6
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31376 Internal error: %1 expression=%2
GS-31377 Indentation value exceeds width by %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31378 Internal error: No parent
GS-31379 Internal error: Parent not of type LayoutNode (type=%1)
GS-31382 The number of items in all series must be the same for the "StackedArea" type.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31383 The x values of different series need to be the same for the "StackedArea" type.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31384 The number of xValues and yValues differ (Have %1 xValues and %2 yValues)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31385 When seriesTitles are specified, they must have same number as xValues and yValues. Have %1 xValues and %2 seriesTitles
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31386 Internal error: Invalid code type for XYGraph
GS-31388 Internal error: UnsupportedEncodingException "%1" for value "%2" using encoding "%3"
GS-31389 QR-Code: encoding exception "%1" on encoding value "%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31391 QR-Code: Unsupported encoding "%1" (Run "CharsetInfo" for a list of supported encodings)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31392 QR-Code: Invalid the error correction degree value %1 (must be a value between 0 and 3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31393 Invalid font size value %1 (value needs to be to be greater than 0)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31394 Error parsing hex digit {0} at position %2 in string "(2)")
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31395 Parse error: Failed to parse tracking code and routing code from code value "%1" (Found more than one comma)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31396 Parse error: Failed to parse tracking code and routing code from code value "%1" (Encountered non digit character {1})
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31397 Parse error: routing code "%1" exceeds 11 digits
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31398 Parse error: Tracking code "%1" is too short (needs to have at least 2 digits)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31399 Parse error: The second digit of the tracking code {0} is outside the allowed range 0 - 4 in tracking code "%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31400 Nodes attached to the last page footer port must be specified last (After all other nodes including nodes for the primary port)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31401 Failed to load PDF document from file "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31402 Failed to load PDF document from resource URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31403 Failed to load "Base-64" encoded PDF document from data URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31404 Loading PDF document from url %1 failed (cause=%2)

Error message and resolution should be self-explanatory.

GS-31405 Loading PDF document failed (cause=%1)

Error message and resolution should be self-explanatory.

GS-31406 Failed to load "Base-64" encoded PDF document from data URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-31407 Requested page index %1 is out of the range 0..%2.

Error message and resolution should be self-explanatory.

GS-31408 Footer, port:error:(GS-31408) Nodes attached to the anyPageFooter port must be specified prior to specifying any nodes for the primary port

All headers and footers (except the Last Page Footer) must be the elder siblings of all nodes without the Section property specified. In the Structure view, move the Any Page Footer node to a position before the first node without the Section property specified. For further details, see Add headers and footers to a report.

Table 2. Error messages for the Package main
Number Description
GS-32100 Instantiating the Viewer failed with a TargetInvokationException (cause=%1:%2)

For further information, see Packaging for a mobile device.

Table 3. Error messages for the Package shared
Number Description
GS-32700 attribute %1 must be specified

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32701 Invalid value "%1" (must be integer)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32702 Invalid value "%1" (must be a floating point value)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32703 Invalid value "%1" (must be boolean)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32704 Invalid enumeration value "%1" (must be one of: %2)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32705 Invalid option value "%1" (must be one of: %2)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32706 Required option value (must be one of: %1)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32707 Invalid mandatory option value "%1" (must be one of: %2)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32708 Invalid boolean option value "%1" (must be one of: %2)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32709 Required boolean option value (must be one of: %1)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32710 Invalid mandatory boolean option value "%1" (must be one of: %2)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32711 Invalid value "%1" (must be a colon separated list of float point values)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32712 Invalid value "%1" (must be a colon separated list of POSITIVE float point values)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32713 Invalid value "%1" (must be a colon separated list of integer values)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32714 Invalid object option value "%1" (must be one of: %2)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32715 Required object option value (must be one of: %1)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32716 Invalid mandatory object option value "%1" (must be one of: %2)

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32717 Invalid value "%1" (must be a colon separated list of strings): unexpected character "%2" at position %3. Expected a " " or "," character

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32718 Invalid value "%1" (must be a colon separated list of strings): encountered unclosed string starting a position %2.

Error message and resolution should be self-explanatory.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-32719 Missing lower bound in range specification "%1" in expression "%2"

Error message and resolution should be self-explanatory.

GS-32720 Failed to parse "%1" as number in expression in expression "%2"

Error message and resolution should be self-explanatory.

GS-32721 Failed to parse "%1" as upper bound number in expression in expression "%2"

Error message and resolution should be self-explanatory.

Table 4. Error messages for the Package stylesheet
Number Description
GS-33000 %1: not prepared to handle nested style declarations

Error message and resolution should be self-explanatory.

GS-33001 Failed to parse style attribute "%1". Parse error=%2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33002 Error parsing CSS stylesheet: %1

Error message and resolution should be self-explanatory.

GS-33003 Internal error: Node %1 (%2) getIdValue() failed

Error message and resolution should be self-explanatory.

GS-33004 Internal error: Invalid operator %1

Error message and resolution should be self-explanatory.

GS-33005 Internal error: Invalid Id %1

Error message and resolution should be self-explanatory.

GS-33006 Internal error: Invalid Id %1

Error message and resolution should be self-explanatory.

GS-33007 Internal error: failed to find simple selector index

Error message and resolution should be self-explanatory.

GS-33008 Internal error: garbled selector

Error message and resolution should be self-explanatory.

GS-33009 error during printing: Exception: %1

For further information, see Configure printers.

GS-33010 Executing process "%1" returned non zero exit code: %2, Process output:%3
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33011 Got an exception of type "%1" when attempting to start process "%2" (cause=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33012 IOException writing to file "%1" (cause="%2")
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33013 Internal error: closing tag="%1"
GS-33014 Internal error: Expected closing '%1' tag. Got "%2" tag instead
GS-33015 Please contact your sales office regarding licensing.

If you are using a Genero Enterprise license, this error can occur when the Genero Report Engine detects an expired maintenance key. When an expired maintenance key is encountered, each report prints this message on an additional page at the start of the report.

If you have purchased maintenance support, ensure you have updated the maintenance key on your system. Otherwise, call your local support center.

GS-33016 Missing COLDEF section in TABLE

For further information, see Table.

GS-33017 Found illegal tag "%1" within COLDEFS section

For further information, see Table.

GS-33018 COLDEF element requires "fWidth" or "pWidth" attribute

For further information, see Table.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33019 COL references undeclared column in COLDEFS section

For further information, see Table.

GS-33020 Illegal align value "%1" (must be one of "left", "right", "center" or "baseline")
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33021 invalid value %1 for align attribute (must be one of "left", "right" or "center")
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33022 LI element is not nested within a OL or UL element

Error message and resolution should be self-explanatory.

GS-33023 Encountered DIMENSIONS element at unexpected location within a PIVOTTABLE. DIMENSIONS need to be declared before any VALUES.

For further information, see Working with pivot tables.

GS-33024 Encountered a DATACOLUMN element for an undeclared column.

Error message and resolution should be self-explanatory.

GS-33025 %1 element encountered at unexpected position.%2

Error message and resolution should be self-explanatory.

GS-33026 Failed to parse value "%1" as floating point value
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33027 Not enough dimensions in pivot table to draw as a map chart (Table needs to have at least one dimension column)

For further information, see Working with pivot tables.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33028 Not enough values in pivot table to draw as a map chart (Table needs to have at least one value column)

For further information, see Working with pivot tables.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33029 Not enough dimensions in pivot table to draw as a map chart (Table needs to have at least two dimension columns)

For further information, see Working with pivot tables.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33030 Not enough values in pivot table to draw as a map chart (Table needs to have at least one value column)

For further information, see Working with pivot tables.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33031 Not enough values in pivot table to draw as a xy chart (Table needs to have at least two value columns)

For further information, see Working with pivot tables.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33032 First value is not numeric (The first two values need to be numeric in order to draw a XY chart)

For further information, see XY charts.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33033 Second value is not numeric (The first two values need to be numeric in order to draw a XY chart)

For further information, see XY charts.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33034 Internal error: closing tag="%1"
GS-33035 Internal error: Expected closing "%1" tag. Got "%2" tag instead
GS-33036 Internal error: Reference to unregistered color "%1"
GS-33037 Internal error: Reference to unregistered font "%1"
GS-33038 Incomplete document

Error message and resolution should be self-explanatory.

GS-33039 IllegalAccessException: Cannot load class "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33040 InstantiationException: Cannot load class "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33041 NoSuchMethodException: Cannot load class "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33042 InvocationTargetException: Cannot load class "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33043 Internal error: IOException (cause="%1"
GS-33044 Internal error: parse called
GS-33045 Syntax error in PXML font size expression (%1) (Missing comma)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33046 Syntax error in PXML font size expression (%1) (can't parse "line" and "column" values as integers)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33047 Failed to parse font size percent expression %1 (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33048 Internal error: Could not find element %1 with source id %2 (name=%3), path=%4
GS-33049 Internal error: Could not find element %1 with source id %2 (name=%3), path=%4
GS-33050 Internal error: Failed to retrieve parent font size: (cause=%1)
GS-33051 Invalid port %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33052 Invalid page number format "%1"

For further information, see pageNoFormat property.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33053 Internal error: Got exception of type "%1" during creation of an hex encoded bitmap (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33054 COLDEF element requires "fWidth" or "pWidth" attribute

For further information, see Table.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33055 Internal error: failed to find child %1 for parent %2
GS-33056 Internal error: node is of unexpected type %1
GS-33057 COL references undeclared column in COLDEFS section in row %1

For further information, see Table.

GS-33058 Exception of type "%1" encountered when trying to load image from URL "%2" (cause=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33059 Value may not contain the file name separator character '%1'
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33060 Value "%1" is not supported on this platform (Run "java ImageIOInfo" to obtain a list of available formats)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33061 Got an exception of type "%1" when attempting to start the PPM image processor "%2" (cause=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33062 Got an exception of type "%1" when attempting to write to the PPM image processor "%2" (cause=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33063 Executing PPM processor "%1" returned non zero exit code: %2 (Process output=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33064 Executing PPM processor "%1" returned non zero exit code: %2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33065 Failed to save image to file "%1" (cause=%2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33066 Encountered exception of type "%1" while attempting to save a page image to a stream (cause=%2}
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33067 Failed to save PPM image to file "%1" (cause=%2}
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33068 Invalid value %1 (Allowed values are between 0 and 1)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33069 Failed to save PDF document to file "%1" (cause=%2}
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33070 Encountered exception of type "%1" when attempting to write PDF document to host "%2" at port %3 (cause=%4)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33071 Ecountered '{' in list (no nested lists allowed) at character position %1 in data "%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33072 Unexpected character '%1' at character position %2 in data "%3"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33076 Ecountered unexpected '{' character at character position %1 in data "%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33078 Missing '{' to close list at character position %1 in data "%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33079 Encountered unfinished attribute declaration at character position %1 in data "%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33080 Missing '=' character after attribute name at character position %1 in data "%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33081 Missing attribute value after '=' character at character position %1 in data "%2".
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33082 %1: failed to write to host "%2" at port %3, reason: %4

Error message and resolution should be self-explanatory.

GS-33083 Unknown encoding %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33084 Invalid value '%1' for attribute %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33085 Internal error: got exception of type "%1" when creating a "date time" attribute from value "%2" (cause=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33086 Internal error: got exception of type "%1" when creating an integer attribute from value "%2" (cause=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33087 Internal error: got exception of type "%1" when creating a text attribute from value "%2" (cause=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33088 Attribute "mediaTrayNumbers" is only available on the Linux platform
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33090 No print service found
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33094 Cannot write to file %1 msg=%2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33095 Internal error: Failed parse pattern value "%1". Msg=%2
GS-33096 Got an exception of type "%1" when attempting to launch the spooler command "%2" (cause=%3
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33097 Got an exception of type "%1" when attempting to write to the spooler "%2" (cause=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33098 cannot find stream printer for mime type "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33100 Internal error: reject called
GS-33101 Internal error: got non 2D Graphics
GS-33102 Internal error: pageIndex %1 out of range (%2,%3
GS-33103 Unexpected element "%1". Expected document root element to be a "PXML" element.

Error message and resolution should be self-explanatory.

GS-33104 %1 root element has wrong namespace "%2". Expected namespace is "%3". Try adding xmlns="%4" to the root element.

Error message and resolution should be self-explanatory.

GS-33105 Class %1 not found
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33106 Cannot load class %1 (%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33108 Cannot load class %1. constructor not found (%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33110 Internal error: %1::endElementEx() current==null
GS-33117 IOException on writing RTF document to file "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33118 %1 element is not nested within a %2 element

Error message and resolution should be self-explanatory.

GS-33120 setting up print service failed (%1)

Error message and resolution should be self-explanatory.

GS-33121 IO error during printing (%1), cause=%2

Error message and resolution should be self-explanatory.

GS-33122 aborted printing (%1)

Error message and resolution should be self-explanatory.

GS-33123 error during printing (%1:%2)

Check your printer.

GS-33124 error during printing, printing aborted.

Check your printer.

GS-33125 error during printing (%1)

Check your printer.

GS-33126 internal error: got invalid value %1 for property orientationRequested. Setting to %2.

For further information, see fgl_report_setPrinterOrientationRequested.

GS-33127 InvocationTargetException: failed to instantiate style sheet "%1" (cause=%2).
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33128 Exception: failed to instantiate style sheet "%1" (cause=%2).
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33129 IOException reading compressed source (cause=%1)

Error message and resolution should be self-explanatory.

GS-33131 Invalid command in transform attribute ("%1")
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33132 Not enough arguments to %1 command in transform attribute. Required are %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33133 Cannot parse argument "%1" as number for the %2 command in transform attribute
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33134 Wrong number of matrix values in %1 attribute (%2) required are %3
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33135 Uneven number of values in %1 attribute (%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33136 Cannot resolve reference in use tag href=%1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33137 Internal error: Invalid end cap value %1
GS-33138 Internal error: Invalid line join %1
GS-33139 Attribute value error: %1 must be a value between %2 and %3 (val=%4)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33140 Wrt error: failed to read from source

Error message and resolution should be self-explanatory.

GS-33141 Wrt error: Got non zero status value:%1, msg=%2

Error message and resolution should be self-explanatory.

GS-33142 Wrt error: Exception=%1, msg="%2"

Error message and resolution should be self-explanatory.

GS-33143 IOException writing to file "%1". msg="%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33144 IOException flushing to temp file. msg="%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33145 The TransformerFactory does not support SAX input and SAX output
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33146 Encountered "TransformerConfiguationException" trying to initialize for loading XSLT style from URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33147 Encountered "SAXException" trying to initialize for loading XSLT style from URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33148 Encountered "IOException" trying to load XSLT style from URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33150 Encountered "TransformerConfigurationException" trying to load XSLT style from URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33151 Encountered "SAXNotRecognizedException" trying to load XSLT style from URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33152 Encountered "SAXNotSupportedException" trying to load XSLT style from URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33153 Encountered "SAXException" on issuing "startDocument" using XSLT style from URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33154 Missing column value for column %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33155 Illegal character set name %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33156 Unsupported character set name %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33157 Failed to write page number template (cause=%1}
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33158 Path %1 is not a directory
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33159 Failed to create directory %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33160 Unexpected element "%1". Expected document root element to be a "SVG" element.

Error message and resolution should be self-explanatory.

GS-33161 Encountered unreferenceable "g" element in "defs" element ("id" attribute missing).

Error message and resolution should be self-explanatory.

GS-33162 Encountered unreferenceable "font" element in "defs" element ("id" attribute missing).

Error message and resolution should be self-explanatory.

GS-33163 Encountered unreferenceable "image" element in "defs" element ("id" attribute missing).

Error message and resolution should be self-explanatory.

GS-33164 Encountered faulty "image" element in "defs" element ("href" attribute missing).

Error message and resolution should be self-explanatory.

GS-33165 Failed to create image file in directory %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33166 Failed to create file "index.txt" in directory %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33167 font id "%1" does not end with a style digit.

Error message and resolution should be self-explanatory.

GS-33168 Failed to create WOFF font file "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33169 Failed to create TTF font file "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33170 Failed to create EOT font file "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33171 Failed to rename file %1.part
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33172 Failed to create generic report design document from template %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33173 Failed to create temporary generic report design document file
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33174 Printer %1 not found
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33175 Failed to rename WOFF font file to "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33176 Failed to rename TTF font file to "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33177 Failed to close image file "%1" (cause=%2}
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33178 IOException closing file "%1". msg="%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33179 Failed to rename EOR font file to "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33180 Failed to create file "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33182 Failed to parse %1 as URL
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33184 RTL attribute "name" not specified at "%1"

For further information, see Using the expression language.

GS-33185 RTL attribute "type" not specified at "%1"

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33186 Expression error: %1 evaluating RTL expression "%2" at attribute "%3"

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33187 Computed columns are supported only for absolute paths
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33188 Attribute "type" not specified at "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33189 Invalid computed column type "%1" (must be one of: %2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33190 Attribute "name" not specified at "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33191 Attribute "expression" not specified at "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33192 The value %1 for the attribute "initializationLocation" exeeds the value %2 of the path depth specified by the "pathToContainingClass" attribute at "%3"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33193 The value %1 for the attribute "initializationLocation" exeeds the value %2 of the path depth specified by the "pathToContainingClass" attribute at "%3"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33194 The value %1 for the attribute "placementLocation" exeeds the value %2 of the path depth specified by the "pathToContainingClass" attribute at "%3"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33195 The value %1 for the attribute "placementLocation" is not smaller or equal to the value %2 of the "placementLocation" at "%3"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33196 Path must be absolute
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33197 No SortItems specified at "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33198 Got an exception of type "%1" when attempting to connect to the PJL printer "%2" (cause=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33199 Got an exception of type "%1" when attempting to initialize PJL job (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33200 Got an exception of type "%1" when attempting to initialize PJL from IPP attributes (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33201 Got an exception of type "%1" when attempting to instantiate Postscript optimizer (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33202 Got an exception of type "%1" when attempting to create destination file "%2" for writing (cause=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33203 Destination URI %1 doesnt denote a local file
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33204 lpr printer options are not available on this platform
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33205 Unknown transformation processor name %1 at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33206 Unknown "%1" element in Aggregations element at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33207 Unknown "%1" element in Grouping element at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33208 Missing "path" attribute in Collection element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33209 Missing "collectionItemName" attribute in Collection element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33210 Unknown "%1" element in GroupBy element at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33211 Missing "expression" attribute in GroupBy element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33212 Missing "name" attribute in GroupBy element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33213 Unknown "%1" element in GroupBy element at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33214 Missing "name" attribute in input-variable element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33215 Missing "type" attribute in input-variable element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33216 Missing "path" attribute in Aggregation element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33217 Missing "name" attribute in Aggregation element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33218 Missing "rule" attribute in Aggregation element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33219 Missing "expression" attribute in Aggregation element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33220 Unknown "%1" element in GroupBy element at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33221 CError computing aggregate "Min" from the RTL expression "%1" since the computed value "%2" does not implement the Comparable interface
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33222 CError computing aggregate "Max" from the RTL expression "%1" since the computed value "%2" does not implement the Comparable interface
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33223 This version supports stand alone licenses only
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33224 Failed to highlight using a custom highlighter. Failed to invoke the static method "CustomHighligher.highlight(Graphics2D,String,Rectangle2D.Double,Color,Color). (cause=%1}
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33225 PrintException during printing (%1), cause=%2

Check your printer.

Table 5. Error messages for the Package stylesheet.standardpipe
Number Description
GS-33800 Cannot open file
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33802 Old file format. Use last version of Genero Report Designer to update the file
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33803 File format :" + version + " not supported. This executable supports :" + SUPPORTED_VERSION_T
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33804 logical page mapping is set to "labels" but fgl_report_configureLabelOutput() was not called to configure the layout
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33805 cannot determine label width. Value was not set in call to fgl_report_configureLabelOutput() and it is not set in the .4rp template.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33806 cannot determine label height. Value was not set in call to fgl_report_configureLabelOutput() and it is not set in the .4rp template.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33807 environment variable GREDIR is not set
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33808 environment variable FGLDIR is not set
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
Table 6. Error messages for the Package stylesheet.rtl
Number Description
GS-33900 Unknown RTL variable type "%1"

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33901 Failed to initialize numeric RTL attribute variable from the input string "%1"

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33902 Missing "url" attribute in RTL call-report element at %1

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33903 Missing RTL match element at %1

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33904 Missing RTL "name" attribute in entity declaration at %1

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33905 Missing "url" attribute in RTL load-entities element at %1

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33906 Missing "name" attribute in RTL expand-entity element at %1

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33907 Reference to undeclared RTL entity "%1" at %2

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33908 Failed to replace RTL entity parameter "%1". Parameter was not specified at %2

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33909 Missing "name" attribute in RTL entitiy parameter element at %1

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33910 Missing "value" attribute in RTL entitiy parameter element at %1

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33911 Failed to find RTL style sheet root element at %1

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33912 Unknown RTL element %1 at %2

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33913 Encountered style sheet element with more than one RTL element at %1

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33914 Missing RTL elements in a sequences block at %1

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33915 Missing RTL alternatives in a or block at %1

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33916 Value for attribute %1 cannot be parsed as integer (Value=%2) at RTL element %3

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33917 Invalid RTL attribute value selector %1 in attribute constraint %2 at %3

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33918 Failed to resolve namespace prefix %1 in RTL constraint for %2 at %3

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33919 Failed to parse regular expresssion for RTL attribute %1. Error=%2 at %3

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33920 RTL attribute "name" not specified at "%1"

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33921 RTL attribute "type" not specified at "%1"

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33922 Illegal RTL location value "%1" at %2 (must be one of "expectedHere", "expectedBefore", "expectedAhead" or "expectedWayAhead"

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33923 Error in input to RTL style: got token opening tag %1 when expecting %2

For further information, see Using the expression language.

GS-33924 Error in input to RTL style: got closing tag %1 when expecting %2

For further information, see Using the expression language.

GS-33925 Expression error: %1 evaluating RTL expression "%2" at attribute "%3" at %4

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33926 Expression error: No variable value for variable "%1" encountered in input stream when evaluating RTL expression "%2" at attribute "%3" at %4

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33927 Expression error: %1 evaluating RTL expression "%2" at attribute "%3" at %4

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33928 Type error: Expression %1 yielded null instead of a %2 value at RTL attribute %3 at %4

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33929 Type error: Expression %1 yielded %2 instead of a %3 value at RTL attribute %4 at %5

For further information, see Using the expression language.

Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33930 Reference to unknown global RTL method "%1"

For further information, see Using the expression language.

GS-33931 Unknown RTL method %1 in the current context of type %2

For further information, see Using the expression language.

GS-33932 Unknown RTL method %1 on object of type %2

For further information, see Using the expression language.

GS-33933 Wrong number of aguments supplied to method "%1.substring" (Expected 2 or 3, got %2)

For further information, see The String Class.

GS-33934 %1 to %2 conversion error in RTL function "%3.toNum()" (cannot parse value "%4" as %5)

For further information, see Using the expression language.

GS-33935 Illegal access error. Not able to call RTL method "%1" on object of type %2 (cause=%3)

For further information, see Using the expression language.

GS-33936 Error executing RTL method "%1" on object of type %2 (cause=%3)

For further information, see Using the expression language.

GS-33937 Wrong number of args supplied to RTL method "%1.%2" (Expected %3, got %4)

For further information, see Using the expression language.

GS-33938 Invalid type for argument no %1 in call to RTL method "%2.%3" (Expected %3, got %4)

For further information, see Using the expression language.

GS-33939 Invalid null argument for argument no %1 in call to RTL method "%2"

For further information, see Using the expression language.

GS-33940 Illegal access error. Not able to obtain value of RTL variable %1 on obbject of type %2 (cause=%3)

For further information, see Using the expression language.

GS-33941 Internal error: Attempt to reference an RTL array element on a null pointer (key="%1")

For further information, see Using the expression language.

GS-33942 Attempt to reference an RTL array element on a non array object of type %1 (key="%2")

For further information, see Using the expression language.

GS-33943 Internal RTL error: Can't find character context

For further information, see Using the expression language.

GS-33944 RTL attribute "name" not specified in rtl:array element
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33945 RTL attribute "key" not specified in rtl:array element
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33946 RTL attribute "name" not specified in rtl:let element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33947 RTL attribute "value" not specified in rtl:let element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33948 Undeclared RTL variable %1 at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33949 RTL attribute "name" not specified at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33950 Expression error "%1" retrieving value of RTL variable "%2" at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33951 Unknown RTL variable %1 at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33952 RTO variable %1 in rtl:array-let element is not of type array but of type %2 at %3
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33953 RTL attribute "key" not specified at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33954 RTL expression "%1" in attribute "key" evaluated to null at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33955 RTL attribute "name" not specified at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33956 RTL expression "%1" in attribute "key" evaluated to null at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33957 RTL attribute "name" not specified at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33958 Internal RTL error: Failed to find "toCharacter"

For further information, see Using the expression language.

GS-33959 Encountered RTL "%1" element containing an invalid element "%2" at %3
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33960 missing "enumeration" attribute value in RTL "for-each" element encountered at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33961 Invalid object type %1 returned for RTL attribute "enumeration" in a "for-each" element. Expected expression "%2" to return enumeration type at %3
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33962 Missing RTL "condition" attribute value in "while" element encountered at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33963 Internal RTL error: Order of calls violated

For further information, see Using the expression language.

GS-33964 Illegal trailing '.' in RTL identifier

For further information, see Using the expression language.

GS-33965 Redefinition of RTL identifier %1 of type %2 as record

For further information, see Using the expression language.

GS-33966 %1 to %2 conversion error in RTL function "%3.toNumeric()" (cannot parse value "%4" as %5)

For further information, see Using the expression language.

GS-33967 Date.fromString(): Failed to parse date value "%1" with pattern "%2"

For further information, see The Date Class.

GS-33968 Date.parseString(): Failed to parse date value "%1" with pattern "%2"

For further information, see The Date Class.

GS-33970 Missing "schemaFileName" attribute in ReportSchemaTransform element at %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-33973 Unknown transformation processor name %1 at %2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
Table 7. Error messages for the Package util
Number Description
GS-34200 Internal error: uri is not allowed to be null
GS-34201 Internal error: localName is not allowed to be null
GS-34202 Internal error: uri is not allowed to be null
GS-34203 Internal error: localName is not allowed to be null
GS-34204 Internal error: uri is not allowed to be null
GS-34205 Internal error: localName is not allowed to be null
GS-34206 Internal error: uri is not allowed to be null
GS-34207 Internal error: localName is not allowed to be null
GS-34208 Internal error: uri is not allowed to be null
GS-34209 Internal error: '0'-'3' or 'u' expected after '\': %1
GS-34210 Internal error: '0'-'7' or 'u' expected after '\': %1
GS-34213 Unmatched quote at end of string "%1"}
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34214 Unmatched quote in string "%1" at position%2
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34215 failed to map file %1 into memory. Reason: %2

Error message and resolution should be self-explanatory.

GS-34216 corrupted file %1. Corruption type: 1

Error message and resolution should be self-explanatory.

GS-34217 corrupted file %1. Corruption type: 2

Error message and resolution should be self-explanatory.

GS-34218 corrupted file %1. Corruption type: 3

Error message and resolution should be self-explanatory.

GS-34219 corrupted file %1. Corruption type: 3 at position %2

Error message and resolution should be self-explanatory.

GS-34220 Internal error: Encountered open Edge
GS-34221 Internal error: Encountered open CharacterEdge
Table 8. Error messages for the Package util.domutil
Number Description
GS-34500 Internal error: Element.getLocalName() returned null. Apparantly the document was modified using DOM Level 1 functions
GS-34501 Attribute type error: Expected integer value for attribute %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34502 Attribute type error: Expected long value for attribute %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34503 Attribute type error: Expected double value for attribute %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34504 Attribute type error: Expected boolean value for attribute %1
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34505 Failed to parse value "%1" as URL (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34506 Cannot resolve relative URL %1. Have no system id to absolutize against.
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34507 Failed to parse "systemId" value "%1" as URI (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34508 Failed to create absolute URL from systemId="%1" and URL="%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34509 Internal error: failed to convert URI "%1" to URL (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34510 Internal error: location path contains unparsable value (path=%1).
GS-34511 Cannot load document %1. Have "FactoryConfigurationError" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34512 Cannot load document %1. Have "ParserConfigurationError" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34513 Cannot load document %1. Have "SAXParseException" (cause=%2) at line %3
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34514 Cannot load document %1. Have "SAXException" (type=%2, cause=%3)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34515 Cannot load document %1. Have "IOException" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34516 Encountered "IOException" trying obtain input stream for URL "%1" (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-34517 Failed to convert File "%1" to a URI (cause=%2)
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
Table 9. Error messages for the Package util.domutil.selection
Number Description
GS-34800 Internal error: Can't find element denoted by the path %1 in the document fragment %2

Error message and resolution should be self-explanatory.

Table 10. Error messages for the Package util.expressionparser
Number Description
GS-35400 Internal error: pushString called on function %1. The function takes only one numeric parameter
GS-35401 Internal error: getStringReturnValue called on function %1. The function returns a numeric value
GS-35402 Internal error: pushString called on function %1. The function takes only two numeric parameters
GS-35403 Internal error: getStringReturnValue called on function %1. The function returns a numeric value
GS-35404 RTL expression error: Illegal access error. Not able to obtain value of variable %1 on object of type %2 (cause=%3)

For further information, see Using the expression language.

GS-35405 RTL expression error: Illegal array or array index. Not able to obtain array value for index %1 on List of type %2 (err=%3)

For further information, see Using the expression language.

GS-35406 RTL expression error: Illegal array index. Not able to obtain array value for index %1 on List of type %2 (cause=%3)

For further information, see Using the expression language.

GS-35407 RTL expression error: Unable to resolve non numeric key %1 on array of type %2 (Non numeric arguments can only be used on "Map" arrays)

For further information, see Using the expression language.

GS-35408 Unknown media type "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-35409 Unknown media type "%1"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-35410 Unexpected extra text %1 at end of PXML expression "%2"

Error message and resolution should be self-explanatory.

GS-35411 Unexpected extra text %1 at end of PXML string expression "%2"

Error message and resolution should be self-explanatory.

GS-35412 Unexpected token %1 in PXML expression. Expected else operator ':' in ternary conditional expression

Error message and resolution should be self-explanatory.

GS-35413 Unexpected token %1 following '|' in PXML expression

Error message and resolution should be self-explanatory.

GS-35414 Unexpected token %1 following '&' in PXML expression

Error message and resolution should be self-explanatory.

GS-35415 Unexpected token %1 following '%2' in PXML expression

Error message and resolution should be self-explanatory.

GS-35416 Unexpected end of PXML expression

Error message and resolution should be self-explanatory.

GS-35417 Type error: illegal call to PXML function "%1" returning %2 while expecting a function that returns a numeric value

Error message and resolution should be self-explanatory.

GS-35418 Expected enumeration identifier for parameter number %1 in call to PXML function %2 but got %3 instead

Error message and resolution should be self-explanatory.

GS-35419 Missing function arguments in call to PXML function %1. Expected %2 parameters but found %3 instead

Error message and resolution should be self-explanatory.

GS-35420 Missing ')' in call to PXML function "%1"

Error message and resolution should be self-explanatory.

GS-35421 Unmatched '(' in PXML expression

Error message and resolution should be self-explanatory.

GS-35422 Internal error in PXML expression (unexpected token %1)

Error message and resolution should be self-explanatory.

GS-35423 Unexpected end of PXML string expression

Error message and resolution should be self-explanatory.

GS-35424 Type error: illegal call to PXML function "%1" returning %2 when expecting a function that returns a string value

Error message and resolution should be self-explanatory.

GS-35425 Expected enumeration identifier for parameter number %1 in call to PXML string function "%2" but got %3 instead

Error message and resolution should be self-explanatory.

GS-35426 Missing function arguments in call to PXML string function "%1" (Expected %2 parameters but found %3)

Error message and resolution should be self-explanatory.

GS-35427 Missing ')' in call to PXML string function "%1"

Error message and resolution should be self-explanatory.

GS-35428 Unmatched '(' in PXML string expression

Error message and resolution should be self-explanatory.

GS-35429 Invalid operator in expression: '%1' (%2)

For further information, see Using the expression language.

GS-35430 Unexpected extra token "%1" at end of RTL expression "%2"

For further information, see Using the expression language.

GS-35431 Unexpected token %1 in RTL expression. Expected else operator ':' in ternary conditional expression

For further information, see Using the expression language.

GS-35432 Error in RTL conditional expression: Expected %1 value to precede '?' operator but got a %2 value

For further information, see Using the expression language.

GS-35433 Error in RTL conditional or expression: Expected left operand to be of type %1 but got a %2 value

For further information, see Using the expression language.

GS-35434 Error in RTL conditional or expression: Expected right operand to be of type %1 but got a %2 value

For further information, see Using the expression language.

GS-35435 Error in RTL conditional and expression: Expected left operand to be of type %1 but got a %2 value

For further information, see Using the expression language.

GS-35436 Error in RTL conditional and expression: Expected right operand to be of type %1 but got a %2 value

For further information, see Using the expression language.

GS-35437 RTL expression error: Relational operator ">=" cannot be applied to types %1,%2

Error message and resolution should be self-explanatory.

GS-35438 RTL expression error: Relational operator ">" cannot be applied to types %1,%2

Error message and resolution should be self-explanatory.

GS-35439 RTL expression error: Relational operator "<=" cannot be applied to types %1,%2

Error message and resolution should be self-explanatory.

GS-35440 RTL expression error: Relational operator "<" cannot be applied to types %1,%2

Error message and resolution should be self-explanatory.

GS-35441 RTL expression error: Operator '+' cannot be applied to %1,%2

Error message and resolution should be self-explanatory.

GS-35442 RTL expression error: Operator '-' cannot be applied to %1,%2

Error message and resolution should be self-explanatory.

GS-35443 RTL expression error: Operator '*' cannot be applied to %1,%2

Error message and resolution should be self-explanatory.

GS-35444 RTL expression, type mismatch: cannot multiply value of type %1

Error message and resolution should be self-explanatory.

GS-35445 RTL expression, division failed (cause=%1)

Error message and resolution should be self-explanatory.

GS-35446 RTL expression: Operator '/' cannot be applied to %1,%2

For further information, see Using the expression language.

GS-35447 RTL expression, integer division failed (cause=%1)

Error message and resolution should be self-explanatory.

GS-35448 RTL expression error: Operator '%%' cannot be applied to %1,%2

For further information, see Using the expression language.

GS-35449 RTL expression error: Illegal array index value (null)

For further information, see Using the expression language.

GS-35450 RTL expression error: Unexpected token %1 ("%2" following array index expression. Expected ']' to terminate expression

For further information, see Using the expression language.

GS-35451 RTL expression error: Cannot negate object of type %1

For further information, see Using the expression language.

GS-35452 RTL expression error: Cannot perform logical negation on an object of type %1

For further information, see Using the expression language.

GS-35453 Unexpected end of RTL expression

For further information, see Using the expression language.

GS-35454 RTL expression error: Unexpected token %1 ("%2" in call to function %3. Expected either ',' or ')'.

For further information, see Using the expression language.

GS-35455 RTL expression error: Unmatched '('

For further information, see Using the expression language.

GS-35456 RTL expression errror: Unexpected token %1 (type=%2)

For further information, see Using the expression language.

GS-35457 ExpressionTokenizer: Internal error: pushBack() called more than once in a row.

For further information, see Using the expression language.

GS-35458 Invalid character '%1' in expression "%2"

For further information, see Using the expression language.

GS-35459 Unexpected end of expression in expression "%1", was expecting '%2'

For further information, see Using the expression language.

GS-35460 Unexpected character '%1' in expression "%2", was expecting '%3'

For further information, see Using the expression language.

GS-35461 Failed to parse numeric value "%1"

Error message and resolution should be self-explanatory.

GS-35462 Failed to parse "%1" as a numeric value for the RTL variable "%2"
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-35463 Unknown function "%1"

Error message and resolution should be self-explanatory.

GS-35464 Unknown function "%1()"

Error message and resolution should be self-explanatory.

GS-35465 Unknown function "%1(%2)"

Error message and resolution should be self-explanatory.

GS-35466 Unknown PXML unit "%1"

For further information, see Unit Names.

GS-35467 Unknown variable "%1"

Error message and resolution should be self-explanatory.

GS-35468 Unexpected token "" + TOKEN_NAMES[ttype] + "" in PXML string expression

Error message and resolution should be self-explanatory.

Table 11. Error messages for the Package util.getopt
Number Description
GS-36000 Invalid '=' character in option "%1"

Error message and resolution should be self-explanatory.

GS-36001 Internal error: Invalid usage
GS-36002 Invalid option "%1". Expected '-' to start option

Error message and resolution should be self-explanatory.

GS-36003 Invalid option "%1". Expected option name to follow '-'

Error message and resolution should be self-explanatory.

GS-36004 Invalid option "%1". Expected option name to follow "--"

Error message and resolution should be self-explanatory.

GS-36005 Unknown option "%1"

Error message and resolution should be self-explanatory.

GS-36006 Missing required argument for option "%1".

Error message and resolution should be self-explanatory.

Table 12. Error messages for the Package util.regexp
Number Description
GS-36300 Unexpected extra text at end of expression at %1 (c='%2')

Error message and resolution should be self-explanatory.

GS-36301 Unexpected end of expression

Error message and resolution should be self-explanatory.

GS-36302 Missing ']' at %1

Error message and resolution should be self-explanatory.

GS-36303 Missing ')' at %1

Error message and resolution should be self-explanatory.

GS-36305 Expected character to follow '-' at %1

Error message and resolution should be self-explanatory.

GS-36306 Expected character to follow '[' at %1

Error message and resolution should be self-explanatory.

GS-36307 Internal error: Called unread() more than once at %1
GS-36308 Internal error: Called unread() more than once at %1
GS-36309 Invalid escape "\%1" at %2

Error message and resolution should be self-explanatory.

Table 13. Error messages for the Package util.regexp.derivates
Number Description
GS-36600 Unknown external reference %1

Error message and resolution should be self-explanatory.

GS-36601 Internal error: Tokenizer returned invalid values n=%1
GS-36603 Internal error: Tokenizer returned invalid values m=%1
GS-36604 Internal error: Tokenizer returned invalid values n=%1 m=%2
GS-36606 Internal error: got internal reference token allthough the stream claims not to produce these
GS-36607 Reference index %1 out of range (max=%2

Error message and resolution should be self-explanatory.

GS-36608 found recursive external reference %1. Stack=%2

Error message and resolution should be self-explanatory.

GS-36609 Line does not consist of two space separated fields
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-36610 Expression file is empty
Tip: This is an attribute error. Attribute errors are displayed in a way that makes them clickable in Genero Studio, as they refer to a particular attribute in the report design document.
GS-36611 Unexpected end of expression

Error message and resolution should be self-explanatory.

GS-36613 Unexpected EOF in control character specification

Error message and resolution should be self-explanatory.

GS-36614 Illegal control character specification "\c%1"

Error message and resolution should be self-explanatory.

GS-36615 Unexpected EOF in external reference

Error message and resolution should be self-explanatory.

GS-36616 Expected '{' character to follow \R in external reference. Got '%1' instead

Error message and resolution should be self-explanatory.

GS-36617 Unclosed external reference

Error message and resolution should be self-explanatory.

GS-36618 Unexpected EOF in tracked external reference

Error message and resolution should be self-explanatory.

GS-36619 Expected '{' character to follow \R in a tracked external reference. Got '%1' instead

Error message and resolution should be self-explanatory.

GS-36620 Unclosed tracked external reference

Error message and resolution should be self-explanatory.

GS-36621 Unexpected EOF in marker definition

Error message and resolution should be self-explanatory.

GS-36622 Expected '{' character to follow \M in marker definition. Got '%1' instead

Error message and resolution should be self-explanatory.

GS-36623 Unclosed marker definition

Error message and resolution should be self-explanatory.

GS-36627 Expected '{' character to follow \p in character class definition. Got '%1' instead

Error message and resolution should be self-explanatory.

GS-36628 Unclosed character class definition

Error message and resolution should be self-explanatory.

GS-36629 Unknown character class name %1

Error message and resolution should be self-explanatory.

GS-36630 Invalid escape "\%1"

Error message and resolution should be self-explanatory.

GS-36631 Unclosed character class

Error message and resolution should be self-explanatory.

GS-36632 illegal digit '%1' in range modifier

Error message and resolution should be self-explanatory.

GS-36633 Unclosed range modifier

Error message and resolution should be self-explanatory.

GS-36634 Upper range value smaller than lower range value in range modifier

Error message and resolution should be self-explanatory.

GS-36635 Invalid range values (%1,%2) in range modifier

Error message and resolution should be self-explanatory.

GS-36636 Invalid range value (%1,) in range modifier

Error message and resolution should be self-explanatory.

GS-36637 Invalid range value (,%1) in range modifier

Error message and resolution should be self-explanatory.

GS-36638 Illegal range modifier

Error message and resolution should be self-explanatory.

GS-36639 Empty range modifier

Error message and resolution should be self-explanatory.

GS-36640 Failed to find an element definition

Error message and resolution should be self-explanatory.

GS-36641 Failed to find referenced element

Error message and resolution should be self-explanatory.

GS-36642 Failed to find complexType element

Error message and resolution should be self-explanatory.

GS-36643 Failed to find simpleType element

Error message and resolution should be self-explanatory.

GS-36644 Failed to find attribute declaration

Error message and resolution should be self-explanatory.

GS-36645 Failed to find attribute group declaration

Error message and resolution should be self-explanatory.

GS-36646 Failed to find group declaration

Error message and resolution should be self-explanatory.

GS-36647 Neither "ref" nor "name" Attributes not set on attribute group

Error message and resolution should be self-explanatory.

GS-36648 Neither "ref" nor "name" Attributes not set on attribute

Error message and resolution should be self-explanatory.

GS-36649 Encountered empty simpleType

Error message and resolution should be self-explanatory.

GS-36650 Encountered extension without base declaration

Error message and resolution should be self-explanatory.

GS-36651 Encountered restriction without base declaration

Error message and resolution should be self-explanatory.

GS-36652 Neither "ref" nor "name" Attributes not set on element

Error message and resolution should be self-explanatory.

GS-36653 maxOccurs has value 0 in particle

Error message and resolution should be self-explanatory.

GS-36654 maxOccurs is smaller than minOccurs in particle

Error message and resolution should be self-explanatory.

GS-36656 Internal error: Unknown type %1
Table 14. Error messages for the Package designtime
Number Description
GS-37200 Failed to find PXML node in template

Error message and resolution should be self-explanatory.

GS-37206 Failed to find RTL "stylesheet" element in template

Error message and resolution should be self-explanatory.

GS-37207 Failed to find element named "%1" in schema

Error message and resolution should be self-explanatory.

GS-37208 Failed to find match node named "%1" in template

Error message and resolution should be self-explanatory.

GS-37209 Failed to find root element "%1" in schema file "%2"

Error message and resolution should be self-explanatory.

GS-37210 Failed to find RTL root match node in template

Error message and resolution should be self-explanatory.

GS-37211 Failed to find root element "%1" in rdd schema file "%2"

Error message and resolution should be self-explanatory.

GS-37212 Missing "schemaFileName" attribute in ReportSchemaTransform element at %1

Error message and resolution should be self-explanatory.

GS-37213 Missing "collectionName" attribute in CollectionWrapper element at %1

Error message and resolution should be self-explanatory.

GS-37214 Missing "itemToShift" attribute in SiblingShifter element at %1

Error message and resolution should be self-explanatory.

GS-37215 Missing "insertPoints" attribute in SiblingShifter element at %1

Error message and resolution should be self-explanatory.

GS-37216 Failed to find item "%1" for shifting specified in SiblingShifter element at %2

Error message and resolution should be self-explanatory.

GS-37217 Missing "collectionGroupName" attribute in CollectionGrouper element at %1

Error message and resolution should be self-explanatory.

GS-37218 Missing "groupingExpression" attribute in CollectionGrouper element at %1

Error message and resolution should be self-explanatory.

GS-37219 Failed to parse "placementLocation" value "%1" as integer in CollectionAggregator element at %2

Error message and resolution should be self-explanatory.

GS-37220 Failed to find trigger path "%1"

For more information, see Triggers.

GS-37221 Failed to find trigger "%1" in parent trigger "%2"

For more information, see Triggers.

GS-37222 Missing "collectionItemName" attribute in element at %1

Error message and resolution should be self-explanatory.

GS-37223 Missing "collectionGroupName" attribute in CollectionGrouper element at %1

Error message and resolution should be self-explanatory.

Table 15. Error messages for the Package designtime.trigger
Number Description
GS-37400 Missing "name" attribute on "input-variable" element

Error message and resolution should be self-explanatory.

GS-37401 Missing "type" attribute on "input-variable" element

Error message and resolution should be self-explanatory.

GS-37402 Unrecognized "type" value "%1" on "input-variable" element

Error message and resolution should be self-explanatory.

GS-37403 Missing "expectedLocation" attribute on "input-variable" element

Error message and resolution should be self-explanatory.

GS-37404 Unrecognized "expectedLocation" value "%1" on "input-variable" element

Error message and resolution should be self-explanatory.

GS-37405 Missing "name" attribute on "match" element

Error message and resolution should be self-explanatory.

GS-37406 Missing "nameConstraint" attribute on "match" element

Error message and resolution should be self-explanatory.

GS-37407 Missing "name" attribute on "Collection" element

Error message and resolution should be self-explanatory.

GS-37409 Missing "name" attribute on "Field" element

Error message and resolution should be self-explanatory.

GS-37410 Missing "type" attribute on "Field" element

Error message and resolution should be self-explanatory.

GS-37411 Unrecognized "type" value "%1" on "Field" element

Error message and resolution should be self-explanatory.