Framework error messages

Error messages at the framework level can apply to various components of Genero Studio. Each component also maintains their own set of error messages.

Table 1. Framework error messages
Number	Description
GS-1001	`Unable to start process: command line empty` Error message and resolution should be self-explanatory.
GS-1002	`Process not running, nothing to abort. Command line: command` Error message and resolution should be self-explanatory.
GS-1003	`Process not started, nothing to abort. Command line: command` Error message and resolution should be self-explanatory.
GS-1004	`Process failed to start. Check executable files existence and permissions. Command line: command` Error message and resolution should be self-explanatory.
GS-1005	`The process crashed some time after starting successfully. Command line: command` Error message and resolution should be self-explanatory.
GS-1006	`Unable to write to the standard input of a non-running process. Command line: command` Error message and resolution should be self-explanatory.
GS-1007	`Unable to read from the standard output or error of a non-running process. Command line: command` Error message and resolution should be self-explanatory.
GS-1008	`An unknown error occurred on process. Command line: command` Error message and resolution should be self-explanatory.
GS-1020	`There is no display client running on host:port` A connection to the display client failed. Ensure that the display client has started on the host and port.
GS-1021	`File filename not found, unable to run the preview.` Error message and resolution should be self-explanatory.
GS-1023	`Invalid display client directory` The startup script of the display client was not found. Check the display client settings in the configuration.
GS-1024	`Failed to start display client in pathname` Check the display client settings in the configuration.
GS-1025	`Display client already running on host:port` Stop the running display client or check the display client settings in the configuration.
GS-1026	`Current Genero configuration's FGL is invalid. Unable to verify if client has correctly started.` Check the Genero install settings in the configuration.
GS-1027	`Display client has been successfully started on host:port` Error message and resolution should be self-explanatory.
GS-1028	`A variable needed to start display client is not set: varname` Check the environment settings in the configuration.
GS-1029	`Client on port portname is not GDC/GMA/GMI` Another application is using the port and is not a display client. Stop the application or check the display client settings in the configuration.
GS-1031	`Using remote display client` Error message and resolution should be self-explanatory.
GS-1032	`Cannot connect to display client on host:port. Verify that your display client configuration is correct` Error message and resolution should be self-explanatory.
GS-1034	`Unable to create path pathname` Check the access permissions on the path.
GS-1035	`Unable to copy filename, the file doesn't exist` Error message and resolution should be self-explanatory.
GS-1036	`Unable to copy filename to destination, check the permissions of the original file, of the destination directory and the destination file if it already exists.` Error message and resolution should be self-explanatory.
GS-1037	`Failed to create tools directory.` Check the access permissions on the tools directory.
GS-1038	`Failed to generate application configuration file (filename)` Error message and resolution should be self-explanatory.
GS-1039	`Application configuration file generated (filename)` Error message and resolution should be self-explanatory.
GS-1040	`Unable to move filename, the file doesn't exist` Error message and resolution should be self-explanatory.
GS-1041	`Unable to move filename to destination, check the permissions of the original file, of the destination directory and the destination file if it already exists.` Error message and resolution should be self-explanatory.
GS-1042	`Unable to delete filename, check the permissions of the original file and its directory.` Error message and resolution should be self-explanatory.
GS-1043	`Unable to start the proxy process. Check your product installation.` It might be necessary to reinstall the product.
GS-1044	`The proxy process crashed. Please contact product support.` Contact your support center to report the issue.
GS-1045	`Unable to write to the proxy process. Check your product installation.` It might be necessary to reinstall the product.
GS-1046	`Unable to read from the proxy process. Check your product installation.` It might be necessary to reinstall the product.
GS-1047	`Unable to start the DVM process. Check your product installation.` Check the Genero install settings in the configuration.
GS-1048	`The DVM process crashed. Please contact product support.` Check the Genero install settings in the configuration.
GS-1049	`Unable to write to the DVM process. Check your product installation.` Check the Genero install settings in the configuration.
GS-1050	`Unable to read from the DVM process. Check your product installation` Check the Genero install settings in the configuration.
GS-1051	`Unable to start the proxy server.` Contact your support center to report the issue.
GS-1052	`An error occurred on the socket connection to the proxy.` Contact your support center to report the issue.
GS-1053	`The socket connection to the proxy has been closed.` Contact your support center to report the issue.
GS-1054	`Path is not accessible from the server. Check your mount points` The paths configured in the Genero Host are not accessible. Check the Genero Host settings of the configuration.
GS-1055	`Launching application at url` Error message and resolution should be self-explanatory.
GS-1056	`Cannot start web browser. Check path in Genero configuration and preferences` Error message and resolution should be self-explanatory.
GS-1057	`Launching GAS monitor at url` Error message and resolution should be self-explanatory.
GS-1058	`The following warnings generated during xcf file generation` A Run task generated an application configuration file warnings. Those warnings are listed after this message.
GS-1059	`Environment variable varname contains invalid characters` Check your environment settings in the Genero Configuration or at the system level.
GS-1060	`Unable to write the file filename. Check path existence and permissions` Error message and resolution should be self-explanatory.
GS-1061	`Invalid URL url` Check the Genero Application Server settings in your configuration.
GS-1062	`Invalid configuration` Check your Genero configuration status and settings.
GS-1063	`Java_error` The Java compiler output an error.
GS-1064	`Cannot find text codec for encoding encoding` Check the encoding and the encoding map are valid .
GS-1065	`Java compilation server error : error` Check the error details for more information.
GS-1066	`Incorrect environment variable varname` Check your environment settings in the Genero Configuration or at the system level.
GS-1067	`Command line too long` A task tried to execute a command which exceed the system length limit.
GS-1068	`Cannot load file-types.` Check your template configuration settings and the file-types.xmlfile format.
GS-1069	`Unable to delete filename, file not found.` Check that the file exists and that you have access permission.
GS-1070	`Cannot save file. Unable to create backup file, aborting.` Error message and resolution should be self-explanatory.
GS-1071	`File filename was created with a newer version and cannot be opened.` Try opening the file with a different version of the product.
GS-1072	`The command command failed with exit code code.` Check the additional output to get details about the error.
GS-1073	`Executing \"action\"` Error message and resolution should be self-explanatory.
GS-1074	`Opening \"filename\"` Error message and resolution should be self-explanatory.
GS-1075	`Opening with shell \"filename\"` Error message and resolution should be self-explanatory.
GS-3001	`Invalid model node info version.` A file has been saved with an unsupported model node info version. Try opening it with the appropriate product version.
GS-3002	`Invalid dynamic property version.` A file has been saved with an unsupported dynamic property version. Try opening it with the appropriate product version.
GS-3003	`Dynamic property property not found for node node` Error message and resolution should be self-explanatory.
GS-3004	`Failed to add property name to model node info: a property with this name was not found` Error message and resolution should be self-explanatory.
GS-3005	`Failed to add property name to model node info: a dynamic property with this name already exists` A dynamic property has been defined twice in a model node info. The file cannot be loaded.
GS-3006	`Failed to add property name to model node info: a static property with this name already exists` A property has been defined twice in a model node info. The file cannot be loaded.
GS-3007	`Model node info for type type not found.` Properties have been defined for a non-existing model node information.
GS-3008	`Failed to add property info name: a dynamic property with this name already exists` Error message and resolution should be self-explanatory.
GS-3009	`Failed to add property info name: a static property with this name already exists` Error message and resolution should be self-explanatory.
GS-3010	`Failed to add property group name: a dynamic property group with this name already exists` A dynamic property group has been defined twice. The file cannot be loaded.
GS-3011	`Failed to add property group name: a static property group with this name already exists` A dynamic property has been defined twice. The file cannot be loaded.
GS-3012	`Invalid property info version.` A file has been saved with an unsupported property information version. Try opening it with the appropriate product version.
GS-3013	`Failed to read dynamic property.` An error occurred while reading dynamic properties.
GS-3014	`Found orphan property '%1'. Update your setup or clean document settings to remove it` Some examples of why this may occur: Projects view User settings in the project file are not part of the current template. Meta-Schema Manager The meta-schema file contains dynamic properties which are not defined in the current set of templates. It was likely created using a different set of template files. Form Designer / Business Record The form contains a dynamic property which is not present in the specific settings. This error is generated when the specific settings do not match the document dynamic property settings. These orphan properties won’t be taken into account during compilation. Possible solutions: The file was opened in the wrong setup. Change your Genero Configuration to load the correct setup (i.e., choose the correct template as defined by GSTSETUPDIR) and re-open the file. If the orphan property is not required, clear all orphan properties by selecting Tools > Specific setup > Clean orphan properties. Warning: The definition of all orphan properties and their entered data will be permanently discarded. Review the list of orphan properties in the Document Errors view before you clean orphan properties. If the orphan property is required, add the orphan property to the settings.agconf file.
GS-3015	`Found orphan property group '%1'. Update your setup or clean document settings to remove it` Some examples of why this may occur: Projects view User settings in the project file are not part of the current template. Meta-Schema Manager The meta-schema file contains dynamic properties which are not defined in the current set of templates. It was likely created using a different set of template files. Form Designer / Business Record The form contains a dynamic property which is not present in the specific settings. This error is generated when the specific settings do not match the document dynamic property settings. These orphan properties won’t be taken into account during compilation. Possible solutions: The file was opened in the wrong setup. Change your Genero Configuration to load the correct setup (i.e., choose the correct template as defined by GSTSETUPDIR) and re-open the file. If the orphan property group is not required, clear all orphan properties by selecting Tools > Specific setup > Clean orphan properties. Warning: The definition of all orphan properties and their entered data will be permanently discarded. Review the list of orphan properties in the Document Errors view before you clean orphan properties. If the orphan property group is required, add the orphan property group to the settings.agconf file.
GS-3016	`Node '%1' contains orphan properties. Update your setup or clean document settings to remove them` The file settings for the node differ from the Genero Studio ones, either the Genero Studio settings are not up to date, or the file contains old settings. Project Manager User settings in the project file are not part of the current template. Meta-Schema Manager The meta-schema file contains dynamic properties which are not defined in the current set of templates. It was likely created using a different set of template files. Some database objects are using those obsolete properties. Form Designer / Business Record The form contains a dynamic property which is not present in the specific settings. This error is generated when the specific settings do not match the document dynamic property settings. These orphan properties won’t be taken into account during compilation. Possible solutions: The file was opened in the wrong setup. Change your Genero Configuration to load the correct setup (i.e., choose the correct template as defined by GSTSETUPDIR) and re-open the file. If the orphan properties are not required, clear them by selecting Tools > Specific setup > Clean orphan properties. Warning: The definition of all orphan properties and their entered data will be permanently discarded. Review the list of orphan properties in the Document Errors view before you clean orphan properties. If the orphan properties are required, edit the settings.agconf file.
GS-6001	`Path is not accessible from the server. Check your mount points` A task tried to convert a path to a remote path but the server cannot access the file. Check the mount points in the Genero Host configuration.
GS-6002	`Invalid product version.` Error message and resolution should be self-explanatory.
GS-6004	`Product bundle is up to date` Error message and resolution should be self-explanatory.
GS-6005	`Download started.` Error message and resolution should be self-explanatory.
GS-6006	`Install cancelled : The md5 hash doesn't match.` Error message and resolution should be self-explanatory.
GS-6007	`Install cancelled : The file name doesn't match.` Error message and resolution should be self-explanatory.
GS-6008	`Update failed, extraction error.` Error message and resolution should be self-explanatory.
GS-6009	`Update server returned an error: error` The updater cancelled the installation because the update server returned an error.
GS-6010	`Invalid sofware update login.` Error message and resolution should be self-explanatory.
GS-6011	`Update error : invalid product.` Error message and resolution should be self-explanatory.
GS-6012	`Update error : invalid product version.` Error message and resolution should be self-explanatory.
GS-6013	`Update error : invalid sofware update request.` Error message and resolution should be self-explanatory.
GS-6014	`Download finished.` Error message and resolution should be self-explanatory.
GS-6015	`Update successful.` Error message and resolution should be self-explanatory.
GS-6016	`Update aborted.` Error message and resolution should be self-explanatory.
GS-6100	`Cannot load creatable file.` The creatable file is invalid and cannot be loaded.