Genero Identity Platform StarterApp reference

The StarterApp configures the Genero Identity Platform (GIP) running on a Genero Application Server (GAS).

Before you can use the GIP, you must configure the GIP. The StarterApp configures the GIP. You run the application one time to configure the GIP.

If you are setting up the GIP for the first time, follow the instructions here: Setting up the Genero Identity Provider.

If your architecture involves multiple GAS servers, you initially set up the GIP on one GAS. After the initial configuration, you then configure the other GAS servers to link to that initial setup. Find the instructions for configuring those GAS servers here: Configure for an external GIP.

The remainder of this topic serves as a complete reference to the StarterApp. Its purpose is to provide you with the detail behind each decision you are asked to make while using the StarterApp.

Starting the StarterApp

To start the StarterApp, enter the StarterApp URL:

http://host:port/[gas/]ua/r/idp/StarterApp

In development, you may be using the standalone dispatcher. For the standalone dispatcher, the StarterApp URL is:

http://host:port/ua/r/idp/StarterApp

Completing the StarterApp forms

The StarterApp consists of two forms.

The Genero IDP first installation form. See Table 1.
The Genero Identity Provider Installation form is based on the installation mode selected.
- For a local mode installation, see Table 2.
- For an external mode installation, see Table 3

Table 1. Genero IDP first installation
Configuration option	Instruction
	Select "Local" if you are configuring the GIP: for a GAS sitting behind a Web server, when you are on the same machine as the Web server and GAS. for a standalone GAS dispatcher (httpdispatch). Select "External" if you are in a multi-GAS environment, and the GIP has already been configured for a GAS on an external machine.

Table 2. Genero Identity Platform Installation (local mode)
Configuration option	Instruction
	Create the GIP administrator account. This account has access to GIP components, such as the ConsoleApp and DeploymentApp.
	The GIP uses the OAuth password when generating OAuth secret IDs. For example, when deploying and securing applications, the GIP uses this password to compute the `SECRET ID`. Safely store the OAuth password entered here, in case of system failure. Restoring it later will allow you to re-create all secret ids of the OAuth protocol.
	The Base URL is the base URL for the Genero Application Server. The StarterApp computes the default URL from the address of the GAS running the StarterApp. If the GAS is configured with a Web server in HTTPS, the base URL will use the HTTPS protocol. HTTPS is preferred for GIP. You can typically accept the default URL. Edit this setting if you intend the GIP to use a different GAS.
	The profile service is a component of GIP that maintains user data such as name, date of birth, email address, etc., for registered users on the GIP: Select "None" if you do not want to install the user profile service. Select "Integrated" if installing the user profile service on the same host as the GIP. This is the default option. Select "External" if you have installed the user profile service on another machine, and need to provide the URL to the service.
	"Deployment service" are a set of services required by the GAS to manage Genero Archive (gar), and GBC. This option is selected by default. The service is used by the DeploymentApp and the command line tools that use its micro services to deploy. Select "Deployment app" to install the GUI tool that connects to the Deployment services. It provides an alternative to using command line tools for deploying GAR and GBC. Tip: In a multi-GAS set up, the DeploymentApp can be on one machine. You just need to ensure the Deployment services are running on the machines you want it to deploy to. Select "Shared file demo" to view a demo of the shared file microservice.

Table 3. Genero Identity Platform Installation (external mode)
Configuration option	Instruction
	Typically, you can accept the default base URL as the StarterApp automatically computes this from the address of the GAS you run the app from. If the GAS is configured with a Web server in HTTPS, the base URL will use the HTTPS protocol. HTTPS is preferred for GIP. Edit this setting if you intend the GIP to use a different GAS.
	"Deployment service" are a set of services required by the GAS to manage Genero Archive (gar), and GBC. This option is selected by default. The service is used by the DeploymentApp and the command line tools that use its micro services to deploy. Select "Deployment app" to install the GUI tool that connects to the Deployment services. It provides an alternative to using command line tools for deploying GAR and GBC. Tip: In a multi-GAS set up, the DeploymentApp can be on one machine. You just need to ensure the Deployment services are running on the machines you want it to deploy to. Select "Shared file demo" to view a demo of the shared file microservice.