Data type conversion reference

This topic lists type conversion rules for all data types.

Note: Type conversion errors can be controlled with the WHENEVER ANY ERROR clause, or with TRY/CATCH blocks. For more details, see Handling type conversion errors.

Boolean type conversions

A BOOLEAN value is an integer value 1 or 0 and thus can be converted to/from any other numeric type of the language.

When converting a numeric value to a BOOLEAN, any value different from 0 becomes TRUE, otherwise (zero) is FALSE.

DEFINE hasContent BOOLEAN, s STRING
LET s = "abc"
LET hasContent = s.getLength()

When converting a string (CHAR, VARCHAR or STRING) to BOOLEAN, the string will be converted to a number first, then the number-to-boolean conversion applies. If the string value cannot convert to a numeric value (for example, "abc"), the boolean value becomes NULL.

When converting a BOOLEAN to a string, the result will be "1" or "0" string values, depending on the boolean value.

Large object type conversions

A TEXT value can be converted to/from CHAR, VARCHAR or STRING.

The BYTE type cannot be converted to/from any other type.

Character to character types

When assigning a CHAR/VARCHAR value to a CHAR/VARCHAR variable, the trailing characters are silently truncated, if the receiving type is not large enouth.

Not runtime error can be detected, even with WHENEVER ANY ERROR or TRY/CATCH.

MAIN
  DEFINE c6 CHAR(6)
  DEFINE c3 CHAR(3)

  WHENEVER ANY ERROR CONTINUE

  LET c6 = "abcdef"
  LET c3 = c6
  DISPLAY c3, " : ", status  -- Shows "abc :    0"

END MAIN

Integers to integers types

Converting between TINYINT, SMALLINT, INTEGER and BIGINT is possible, as long as the receiving type can hold the whole number to be assigned.

If the integer value exceeds the range of the receiving data type, the conversion fails.

MAIN
  DEFINE int4 INTEGER
  DEFINE int2 SMALLINT

  WHENEVER ANY ERROR CONTINUE

  LET int4 = 32767
  LET int2 = int4
  DISPLAY int2, " : ", status

  LET int4 = 32768
  LET int2 = int4
  DISPLAY int2, " : ", status      -- Shows error -1214

END MAIN

Integers to decimal types

TINYINT, SMALLINT, INTEGER and BIGINT values can be converted to SMALLFLOAT, FLOAT, DECIMAL or MONEY as long as the decimal type is defined with sufficient digits to hold the whole number.

If the integer value exceeds the range of the receiving data type, the conversion fails.

MAIN
  DEFINE int4 INTEGER
  DEFINE d051 DECIMAL(5,1)

  WHENEVER ANY ERROR CONTINUE

  LET int4 = 999
  LET d051 = int4
  DISPLAY d051, " : ", status   -- Shows 999.0

  LET int4 = 999999
  LET d051 = int4
  DISPLAY d051, " : ", status   -- Shows error -1226

END MAIN

Decimal to integer types

When converting a SMALLFLOAT, FLOAT DECIMAL or MONEY to a TINYINT, SMALLINT, INTEGER or BIGINT, the fractional part of the decimal value is truncated.

If the decimal value exceeds the range of the receiving integer data type, the conversion fails.

MAIN
  DEFINE d102 DECIMAL(10,2)
  DEFINE int2 SMALLINT

  WHENEVER ANY ERROR CONTINUE

  LET d102 = 32767.99
  LET int2 = d102
  DISPLAY int2, " : ", status   -- Shows 32767

  LET d102 = 32768.0
  LET int2 = d102
  DISPLAY int2, " : ", status   -- Shows error -1214

END MAIN

Decimal to decimal types

Converting between SMALLFLOAT, FLOAT, DECIMAL or MONEY types is allowed as long as the receiving type is defined with sufficient digits to hold the whole part of the original value.

If the original value contains more fractional digits than the receiving data type supports, low-order digits are discarded.

If the decimal value exceeds the range of the receiving decimal data type, the conversion fails.

MAIN
  DEFINE d102 DECIMAL(10,2)
  DEFINE d051 DECIMAL(5,1)

  WHENEVER ANY ERROR CONTINUE

  LET d102 = 123.45
  LET d051 = d102
  DISPLAY d051, " : ", status   -- Shows 123.5

  LET d102 = 99999.99
  LET d051 = d102
  DISPLAY d051, " : ", status   -- Shows error -1226

END MAIN

Integers to character types

Converting TINYINT, SMALLINT, INTEGER or BIGINT values to CHAR, VARCHAR and STRING is allowed as long as the receiving character variable is large enough.

If the receiving character type is to small to hold the integer value, it is filled with * overflow stars, and the conversion fails.

MAIN
  DEFINE int4 INTEGER
  DEFINE vc05 VARCHAR(5)

  WHENEVER ANY ERROR CONTINUE

  LET int4 = -123
  LET vc05 = int4
  DISPLAY vc05, " : ", status

  LET int4 = 999999
  LET vc05 = int4
  DISPLAY vc05, " : ", status -- Shows ***** and error -1207

END MAIN

Decimal to character types

Converting SMALLFLOAT, FLOAT, DECIMAL or MONEY values to CHAR, VARCHAR and STRING implies numeric formatting.

Numeric formatting is controlled by the DBMONEY and DBFORMAT environment variables. Especially, the decimal separator is defined by these environment variables.

Tip: To convert numeric data to character strings in ISO format independently from DBMONEY/DBFORMAT, use the util.JSON.stringify() method:
IMPORT util
FUNCTION dec2iso(d DECIMAL)
    RETURN util.JSON.stringify(d)
END FUNCTION

The resulting string is left-aligned (for lossless conversions) or right-aligned (for visual conversions), depending on the conversion context; and the decimal part is kept depending on the numeric type.

MAIN
  DEFINE m MONEY(8,2),
         s VARCHAR(10)
  LET m = 123.45
  LET s = m   -- Lossless conversion "$123.45"
  DISPLAY m   -- Visual conversion   "    $123.45"
END MAIN

Fixed point decimals (DECIMAL(p,s)) are converted to strings that can fit in a CHAR(p+2): The string is built with up to p significant digits + 1 character for the sign + 1 character for the decimal point. The result of a DECIMAL(p,s) to string conversion is never longer than p + 2 characters. For example, a DECIMAL(5,2) can produce "-999.99" (5 + 2 = 7c).

Floating point decimals (DECIMAL(p)) are converted to strings that can fit in a CHAR(p+7): The string is built with up to p significant digits + 1 character for the sign + 1 character for the decimal point + the length of the exponent of needed ("e+123"). The result of a DECIMAL(p) to string conversion is never longer than p + 7. For example, a DECIMAL(5) can produce "-1.2345e-123" (5 + 7 = 12c).

DECIMAL to string conversion depends on the context in which the conversion occurs:
  1. Visual conversion: The result of this conversion will typically be presented to the end user. This conversion happens in DISPLAY, MESSAGE, ERROR, PRINT. The result of a visual conversion is right aligned (padded with leading blanks). This padding results in the same length for any value for a given decimal precision. The length of the result is the maximum possible length as described previously (p+2 for DECIMAL(p,s), p+7 for DECIMAL(p)).

    Visual conversion examples for DECIMAL(5,2):

       Values     1234567
----------------------
   0       | "   0.00"
   -999.99 | "-999.99"
   12.3    | "  12.30"
   12.34   | "  12.34"

    Visual conversion examples for DECIMAL(5):

       Values     123456789012
---------------------------
   0       | "         0.0"
   -99999  | "    -99999.0"
   12.3    | "        12.3"
   12.34   | "       12.34"
   12.345  | "      12.345"
   1.23e7  | "  12300000.0"
   1e100   | "       1e100"
  2. Form field conversion: This conversion concerns decimal numbers presented in form-fields. The result of this conversion is in best case the same as (1). The result of the conversion depends on the width of the form-field. If the width of the form-field is smaller than the perfect length, automatic rounding and exponential notation might be used.
  3. Lossless conversion: Such conversion happens when assigning numbers to string variables (LET), passing numbers as parameters to functions expecting strings, returning numbers from functions to strings, serializing numbers (UNLOAD, XML or JSON APIs). These conversions must avoid the loss of significant digits. When using floating point decimals, this leads to a variable length of the resulting string. A conversion must be reversible: decimal to string to decimal must give the original value. If the target variable is shorter then the maximum possible length, then automatic rounding will occur.

    Lossless conversion examples of DECIMAL(5,2):

       Values     1234567
----------------------
   0       | "0.00"
   -999.99 | "-999.99"
   12.3    | "12.30"
   12.34   | "12.34"

    Lossless conversion examples of DECIMAL(5):

       Values     123456789012
---------------------------
   0       | "0.0"
   -99999  | "-99999.0"
   12.3    | "12.3"
   12.34   | "12.34"
   12.345  | "12.345"
   1.23e7  | "12300000.0"
   1e100   | "1e100"

Automatic rounding occurs if the target string variable is shorter than the maximum possible length of the DECIMAL type. Such conversion might loose significant digits: The runtime system tries to round the value, to fit into the target variable.

  Values     Different target sizes  
              123456   12345   1234
------------------------------------
  0.98765  | "0.9877" "0.988" "0.99"
  123.45   | "123.45" "123.5" "123"

Automatic switch to the exponential notation will occur if the integer part of the decimal value does not fit into the target string variable. For example, if the source variable is a DECIMAL(12) and the target variable is a CHAR(9):

  Values         123456789
----------------------------
  1234567     | "1234567.0"
  12345678    | "12345678"
  123456789   | "123456789"
  1234567890  | "1.2346e10"
  12345678901 | "1.2346e11"

The exponential notation will also be used if the absolute value of a floating point decimal is less than 1e-8 (0.00000001).

Default formatting of floating point DECIMAL(P) has been revised with Genero 2.50. If DECIMAL(P)-to-string conversion must round to 2 digits, use the fglrun.decToCharScale2 FGLPROFILE entry (this applies to all contexts):

fglrun.decToCharScale2 = true

Another FGLPROFILE entry can be used, to get the 2-digit rounding of DECIMAL(P) only in the context of the PRINT statement in reports. (the fglrun.decToCharScale2 and fglrun.decToCharScale2.print parameters are mutually exclusive):

fglrun.decToCharScale2.print = true
Note: Do not use the fglrun.decToCharScale2* configuration parameters, unless you have migration issues.

Formatting a FLOAT is the same as DECIMAL(16). Any FLOAT value with up to 15 digits is exact. There is no precision loss when converting an exact FLOAT back and forth to/form a string. Some FLOAT values require 16, in some rare cases 17 digits for an exact string representation. 16 and 17 digits are not always exact: "8.000000000000001" and "8.000000000000002" represent the same float value.

Formatting a SMALLFLOAT is the same as DECIMAL(7). Any SMALLFLOAT value with up to 6 digits is exact. There is no precision loss when converting an exact SMALLFLOAT back and forth to/form a string. Some SMALLFLOAT values require 7, in some rare cases 8 digits for an exact string representation. 7 and 8 digits SMALLFLOAT are not always exact: "0.0009999901" and "0.0009999902" represent the same SMALLFLOAT value.

If FLOAT/SMALLFLOAT-to-string conversion must round to 2 digits, use the fglrun.floatToCharScale2 FGLPROFILE entry (this applies to all contexts):

fglrun.floatToCharScale2 = true

Another FGLPROFILE entry can be used, to get the 2-digit rounding of FLOAT/SMALLFLOAT only in the context of the PRINT statement in reports. (the fglrun.floatToCharScale2 and fglrun.floatToCharScale2.print parameters are mutually exclusive):

fglrun.floatToCharScale2.print = true
Note: Do not use the fglrun.floatToCharScale2* configuration parameters, unless you have migration issues.

Character to numeric types

A CHAR, VARCHAR and STRING value can be converted to a TINYINT, SMALLINT, INTEGER, BIGINT, SMALLFLOAT, FLOAT, DECIMAL or MONEY value as long as the character string value represents a valid number.

Numeric formatting is controlled by the DBMONEY and DBFORMAT environment variables. Especially, the decimal separator is defined by these environment variables.

Tip: To convert character strings representing numbers in ISO format to numeric data independently from DBMONEY/DBFORMAT, use the util.JSON.parse() method:
IMPORT util
FUNCTION iso2dec(s STRING)
    DEFINE d DECIMAL
    CALL util.JSON.parse(s,d)
    RETURN d
END FUNCTION

If the original value contains more significant digits or more fractional digits than the receiving data type supports, low-order digits are discarded.

Example using a DECIMAL:

MAIN
  DEFINE d102 DECIMAL(10,2)

  WHENEVER ANY ERROR CONTINUE

  LET d102 = "-123.45"
  DISPLAY d102, " : ", status

  LET d102 = "1234567890123.45"
  DISPLAY d102, " : ", status -- Shows error -1226

  LET d102 = "12345678.999"
  DISPLAY d102, " : ", status -- Shows 12345679.00

END MAIN

Example using an INTEGER:

MAIN
  DEFINE int4 INTEGER

  WHENEVER ANY ERROR CONTINUE

  LET int4 = "-12345"
  DISPLAY int4, " : ", status

  LET int4 = "999999999999"
  DISPLAY int4, " : ", status -- Shows error -1215

END MAIN

Date time to character types

Converting DATE, DATETIME and INTERVAL values to CHAR, VARCHAR and STRING implies date time formatting.
  • DATE formatting is controlled by the DBDATE environment variable.
  • When converting an INTERVAL to a string, either YYYY-MM or DD hh:mm:ss.fffff standard formats are used, depending on the interval class.
  • When converting a DATETIME to a string, the YYYY-MM-DD hh:mm:ss.fffff standard format is used.

If the conversion result is longer than the receiving variable, the resulting character string is filled with * overflow stars.

MAIN
  DEFINE da DATE
  DEFINE vc20 VARCHAR(20)
  DEFINE vc05 VARCHAR(5)

  WHENEVER ANY ERROR CONTINUE

  LET da = MDY(12,24,2012)
  LET vc20 = da
  DISPLAY vc20, " : ", status -- Shows 12/24/2012

  LET vc05 = da
  DISPLAY vc05, " : ", status -- Shows *****

END MAIN

See also Formatting DATE values, Formatting DATETIME values and Formatting INTERVAL values.

Character to date time types

Converting a CHAR, VARCHAR or STRING value to a DATE, DATETIME or INTERVAL is possible as long as the character string defines a well formatted date time or interval value.

  • When converting a character string to a DATE, the string must follow the date format defined by the DBDATE environment variable.

  • When converting a string to an INTERVAL, the source string must be specified either in YYYY-MM or DD hh:mm:ss.fffff standard formats, depending on the interval class of the target variable.

  • When converting a string to a DATETIME, the format must be YYYY-MM-DD hh:mm:ss.fffff, or must follow the ISO 8601 format sub-set (with the T separator between the date and time part, and optional UTC indicator or timezone offset +/-hh:mm)

    With ISO 8601 date/time format:
    • A "Z" character after the time part specifies the zone designator for the zero UTC offset.
    • When the string ends with a "+/-hh:mm" timezone offset, the value is adjusted to the local timezone: A negative timezone offset such as -02:00 indicates that the represented datetime value is in a time zone west of UTC±00:00. A positive timezone offset such as +05:00 indicates that the represented datetime value is in a time zone east of UTC±00:00.

Example converting strings to DATETIME, when current computer time zone is UTC+01:00:

MAIN
  DEFINE dt DATETIME YEAR TO SECOND
  LET dt = "2012-12-24 11:33:45"
  DISPLAY dt   -- displays 2012-12-24 11:33:45
  LET dt = "2012-12-24T11:33:45+01:00"
  DISPLAY dt   -- displays 2012-12-24 11:33:45 (if TZ=UTC+1h)
  LET dt = "2012-12-24T10:33:45Z"
  DISPLAY dt   -- displays 2012-12-24 11:33:45 (if TZ=UTC+1h)
END MAIN

See also util.Date.parse, util.Datetime.parse and util.Interval.parse.

Converting DATE to/from DATETIME types

When converting a DATETIME to another DATETIME with a different precision, truncation from the left or right can occur. If the target type has more fields than the source type, the year, month and day fields are filled with the current date.
  • When converting a DATE to a DATETIME, the datetime fields are filled with year, month and day from the date value and time fields are set to zero.
  • When converting a DATETIME to a DATE, an implicit EXTEND( datetime-value, YEAR TO DAY ) is performed.
MAIN
  DEFINE da DATE
  DEFINE dt1 DATETIME YEAR TO SECOND
  DEFINE dt2 DATETIME HOUR TO MINUTE
  LET da = MDY(12,24,2012)
  LET dt1 = da
  DISPLAY dt1   -- displays 2012-12-24 00:00:00
  LET dt2 = "23:45"
  LET dt1 = dt2
  DISPLAY dt1   -- displays <current date> 00:00:00
END MAIN

Unsupported type conversions

Other data type conversions not mentioned in this topic are not allowed and will result in a runtime error.