Paged mode of DISPLAY ARRAY

In order to handle very large result sets, use the paged mode of DISPLAY ARRAY.

Understanding the paged mode

The paged mode of DISPLAY ARRAY allows the program to display a very large number of rows, without copying all database rows into the program array.

This mode uses the ON FILL BUFFER data block to let the program populate the array with the current visible page of rows. This is a subset of the database query result set (SELECT), typically controlled by a scrollable cursor.

Figure: Paged mode diagram


Paged mode diagram
Note: DISPLAY ARRAY has following constraints when using the paged mode:
  • By default, row sorting is not allowed: Implement an ON SORT trigger to handle list sorting.
  • Multi-range selection is not supported, if the paged mode uses an undefined number of rows (COUNT=-1).
  • To fill a tree view dynamically, use the ON EXPAND / ON COLLAPSE data blocks.

Paged mode programming details

In paged mode, the dynamic array holds a page of rows, not all rows of the result set. The data rows are provided through the ON FILL BUFFER block, by filling a dynamic array with the rows for the current visible page.

The ON FILL BUFFER clause is used to fill a page of rows in the dynamic array, from a row offset and the number of rows required in the page. The row offset is defined by the FGL_DIALOG_GETBUFFERSTART() built-in function, and the number of rows to provide is defined by the FGL_DIALOG_GETBUFFERLENGTH() built-in function.
Note: The ON FILL BUFFER is only triggered when all the user code is executed and the dialog gets the control back. This means that the fill clause is not immediately fired when calling DIALOG.setArrayLength().
If the total number of rows is known before the dialog is started, specify it with the COUNT dialog attribute of DISPLAY ARRAY:
  • The total number of rows can be changed during dialog execution with the ui.Dialog.setArrayLength() method.
  • In singular DISPLAY ARRAY instructions, define the total number of rows of a paged mode with the SET_COUNT() built-in function or the COUNT attribute. Note that SET_COUNT() or COUNT are only taken into account when the dialog starts.
  • If the total number of rows changes during the execution of the dialog, the only way to specify the number of rows is DIALOG.setArrayLength().
If the total number of rows is not known before starting the DISPLAY ARRAY dialog, set COUNT=-1 in DISPLAY ARRAY attributes. The dialog will then query for rows with ON FILL BUFFER until the end of the result set is reached. The end of the result set is detected:
  • When the number of rows provided in ON FILL BUFFER is less than the number of rows required by the dialog.
  • When you reset the total number of rows to a value higher than -1 with the ui.Dialog.setArrayLength() method.
Note: The dialog cannot support multi-row selection when the total number of rows is undefined.
The DIALOG.setCurrentRow() method can be used to move to a specific row in a paged mode DISPLAY ARRAY.
Note: Before calling DIALOG.setCurrentRow(screen-array, row-index), be sure to provide the actual number of rows with DIALOG.setArrayLength( screen-array, count ) where count >= row-index. Otherwise, the setCurrentRow() call will have no effect, if the dialog has not yet seen row-index rows through ON FILL BUFFER.

If you use a tree view with a paged mode DISPLAY ARRAY, the program will raise an error at runtime: For tree views, the dialog needs the complete set of open nodes with parent/child relations to handle the tree view display. With the paged mode, only a short window of the dataset is known by the dialog.

A typical paged DISPLAY ARRAY implementation consists of a scroll cursor providing the list of records to be displayed. Scroll cursors use a static result set. If you want to display fresh data, you can implement an advanced paged mode by using a scroll cursor that provides the primary keys of the referenced result set, plus a prepared cursor to fetch rows on demand in the ON FILL BUFFER clause. In this case you may need to check whether a row still exists when fetching a record with the second cursor.

Paged mode basic example

The following example shows a DISPLAY ARRAY implementation using a scroll cursor to fill pages of records in ON FILL BUFFER, specifying an undefined number of rows (COUNT=-1).
MAIN
  DEFINE arr DYNAMIC ARRAY OF RECORD
            id INTEGER,
            fname CHAR(30),
            lname CHAR(30)
        END RECORD 
  DEFINE cnt, ofs, len, row, i INTEGER

  DATABASE stores

  OPEN FORM f1 FROM "custlist"
  DISPLAY FORM f1

  DECLARE c1 SCROLL CURSOR FOR
         SELECT customer_num, fname, lname FROM customer 
  OPEN c1

  DISPLAY ARRAY arr TO sa.* ATTRIBUTES(COUNT=-1)
    ON FILL BUFFER
       CALL arr.clear()
       LET ofs = fgl_dialog_getBufferStart()
       LET len = fgl_dialog_getBufferLength()
       LET row = ofs 
       FOR i=1 TO len 
          FETCH ABSOLUTE row c1 INTO arr[i].*
          IF SQLCA.SQLCODE!=0 THEN
            CALL DIALOG.setArrayLength("sa",row-1)
            EXIT FOR
          END IF
          LET row = row + 1
       END FOR
    ON ACTION ten_first_rows_only 
       CALL DIALOG.setArrayLength("sa", 10)
  END DISPLAY

END MAIN

Paged mode with sorting feature

To implement row sorting in a DISPLAY ARRAY using paged mode, use the ON SORT trigger to detect a sort request, get the sort information with the ui.Dialog.getSortKey / ui.Dialog.isSortReverse methods, and re-execute the SQL query to sort rows accordingly with an ORDER BY clause. The ON SORT trigger will be fired before the ON FILL BUFFER trigger:
MAIN
  DATABASE test1
  OPEN FORM f1 FROM "custlist"
  DISPLAY FORM f1
  CALL show_list()
END MAIN

FUNCTION execute_sql(order_by)
  DEFINE order_by STRING
  DEFINE sql STRING
  IF order_by IS NULL THEN
     LET order_by = "ORDER BY fname"
  END IF
  LET sql = "SELECT customer_num, fname, lname FROM customer ", order_by
  DECLARE c1 SCROLL CURSOR FROM sql
  OPEN c1
END FUNCTION

FUNCTION show_list()
  DEFINE arr DYNAMIC ARRAY OF RECORD
            id INTEGER,
            fname VARCHAR(30),
            lname VARCHAR(30)
        END RECORD
  DEFINE ofs, len, row, i INTEGER,
         key STRING, rev BOOLEAN

  CALL execute_sql(NULL)
  DISPLAY ARRAY arr TO sa.* ATTRIBUTES(COUNT=-1)
    ON SORT
       LET key = DIALOG.getSortKey("sa")
       LET rev = DIALOG.isSortReverse("sa")
       IF key IS NULL THEN
          CALL execute_sql( NULL )
       ELSE
          -- Assuming that form field names match table column names
          CALL execute_sql( "ORDER BY " || key || IIF(rev," DESC"," ") )
       END IF
    ON FILL BUFFER
       CALL arr.clear()
       LET ofs = fgl_dialog_getBufferStart()
       LET len = fgl_dialog_getBufferLength()
       LET row = ofs
       FOR i=1 TO len
          FETCH ABSOLUTE row c1 INTO arr[i].*
          IF SQLCA.SQLCODE!=0 THEN
            CALL DIALOG.setArrayLength("sa",row-1)
            EXIT FOR
          END IF
          LET row = row + 1
       END FOR
  END DISPLAY

END FUNCTION

Note that with the above example, the current row remains at the same position: When the table is sorted, the set of rows provided in the ON FILL BUFFER may not include the database row that was the current row before the sort.

To track the current row, store the primary key value of the current row before re-executing the query. After query execution, scan the cursor result set and perform a DIALOG.setCurrentRow() when the primary key of the current row is found. The current row might be outside the row set provided in ON FILL BUFFER. In order to make setCurrentRow() work properly, you have to count the total number of rows before the DISPLAY ARRAY:
  ...
  DEFINE cnt, ofs, len, row, i INTEGER,
         key STRING, rev BOOLEAN,
         row_count, curr_id, last_id INTEGER

  ...

  SELECT COUNT(*) INTO row_count FROM customer

  CALL execute_sql(NULL)
  DISPLAY ARRAY arr TO sa.* ATTRIBUTES(COUNT=row_count)
    ON SORT
       LET row = DIALOG.getCurrentRow("sa")
       FETCH ABSOLUTE row c1 INTO last_id
       LET key = DIALOG.getSortKey("sa")
       LET rev = DIALOG.isSortReverse("sa")
       IF key IS NULL THEN
          CALL execute_sql( NULL )
       ELSE
          -- Assuming that form field names match table column names
          CALL execute_sql( "ORDER BY " || key || IIF(rev," DESC"," ") )
       END IF
       LET row=1
       WHILE TRUE
           FETCH c1 INTO curr_id
           IF SQLCA.SQLCODE==100 THEN
              ERROR "Last current row disappeared from result set!"
              EXIT PROGRAM 1
           END IF
           IF curr_id == last_id THEN
              CALL DIALOG.setCurrentRow("sa",row)
              EXIT WHILE
           END IF
           LET row = row+1
       END WHILE
    ON FILL BUFFER
       ...